Medicines Eye Care Contact Lens Care

ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Opti-Free PureMoist Multi-Purpose Disinfecting Solution contains HydraGlyde Moisture Matrix that provides 16 hours of lens moisture keeping you comfortable for the entire day.Polyquad and Aldox preservatives enhanced disinfection formula has activity against bacteria, fungi and Acanthamoeba that can cause eye infections.For optimal lens moisture, hydration and cleaning, fill the lens case with fresh solution every time lenses are stored. Never reuse solution. This will help achieve maximum lens surface moisture for all day comfortable lens wear.- Provides 16 hours of moisture.- Removes lipid and protein daily for clear vision.- Effective yet gentle formula that kills germs. - Biocompatible Dual Disinfection.- Multi-purpose disinfecting solution.- Removes lipid and protein deposits daily.- Cleans, reconditions, rinses, disinfects, stores.Sterile A.HydraGlyde Moisture Matrix is a proprietary wetting agent that keeps lenses moist for 16 hours.How it works:1. In the lens case, HydraGlyde Moisture Matrix embeds itself on and within the lens surface to keep lenses moist and hydrated throughout the day.2. HydraGlyde Moisture Matrix provides a cushion of moisture for comfort from insertion to removal.  Suitable For: OPTI-FREE™ PureMoist lens care system is intended for use by consumers and eye care professionals for use in the daily cleaning, reconditioning, rinsing, removing protein deposits, reducing lipid deposition, chemical (not heat) disinfection, and storage of silicone hydrogel and soft (hydrophilic) contact lenses.Boxed Contents: 1 x 90mL, 1 x Lens caseSize: 90mL Warnings It is essential that you follow your eye care professional’s directions and all labeling instructions for proper use and care of your lenses and lens care products, including the lens case. Do not reuse or “top o ” solution in the lens case since this may reduce e ective lens disinfection. Eye problems, including an infection or corneal ulcers, can develop rapidly and lead to loss of vision. If you experience persistent eye discomfort, excessive tearing, vision changes, or redness of the eye, IMMEDIATELY remove your lenses and consult your eye care professional as the problem could become more serious. Ingredients Sodium Citrate, Sodium Chloride, Boric Acid, Aminomethylpropanol, Sorbitol, Disodium EDTA, Two wetting agents (Tetronic 1304 (Tetronic is a registered trademark of BASF.) and HydraGlyde Moisture Matrix [EOBO-41 - Polyoxyethylene - Polyoxybutylene]), with Polyquad (Polyquaternium-1) 0.001% and Aldox (Myristamidopropyl Dimethylamine) 0.0006% Preservatives (This patented formula is only supplied by Alcon.).Contains: Sodium citrate, sodium chloride, boric acid, sorbitol, aminomethylpropanol, disodium EDTA, two wetting agents (TETRONIC 1304 and HydraGlyde Moisture Matrix [EOBO-41 (polyoxthylene-poloxybutylene)], POLYQUAD (polyquarternium-1) 0.001% and ALDOX (myristamidopropyl dimethylamine) 0.0006% preservatives, and purified water. Active Ingredients: Sodium Citrate, Sodium Chloride, Boric Acid, Aminomethylpropanol, Sorbitol, Disodium EDTA, Two wetting agents (Tetronic 1304 (Tetronic is a registered trademark of BASF.) and HydraGlyde Moisture Matrix [EOBO-41 - Polyoxyethylene - Polyoxybutylene]), with Polyquad (Polyquaternium-1) 0.001% and Aldox (Myristamidopropyl Dimethylamine) 0.0006% Preservatives (This patented formula is only supplied by Alcon.). Direction Follow These Directions for Use: • Thoroughly wet each side of the lens with OPTI-FREE PureMoist Solution. • Rub each side of the lens for 10 seconds (for a total rubbing time of 20 seconds). • Rinse each side of the lens for 10 seconds with a steady stream of OPTI-FRE PureMois Solution (for a total rinsing time of 20 seconds). • Fill your Alcon Contact Lens Case with fresh OPTI-FREE PureMoist Solution. Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are disinfected and ready to wear. • If any debris remains on contact lenses, rinse with OPTI-FREE PureMois Solution prior to insertion. You may leave your lenses in the unopened lens case containing OPTI-FREE PureMoist Solution for up to 30 days. After this time, your lenses must be cleaned and disinfected with OPTI-FREE PureMoist Solution prior to wear.Storage Instructions Store below 30°C. Discard any remaining solution six months after opening. Storage Temperature: Below 30°C.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients A sterile, isotonic solution that contains boric acid, edetate disodium, poloxamine, sodium borate and sodium chloride; preserved with DYMED™ (polyaminopropyl biguanide) 0.00005%.Direction Step 1: Place at least 3 drops of Renu Sensitive multi-purpose solution on each side of contact lens and rub for 20 seconds. No separate daily cleaner necessary. Step 2: Remove surface debris by rinsing throughly Renu Sensitive multi-purpose solution. Step 3: Place cleaned contact lenses in lens case and fill with fresh Renu Sensitive multi-purpose solution. Soak for at least 4 hours. Remember to always discard solution from lens case after each use.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients Boric acid, sodium borate, potassium chloride, sodium chloride, preserved with polyaminopropyl biguanide (0.00003%) and edetate disodium (0.025%)Direction Rinsing After Cleaning Clean your lenses with a daily cleaner as instructed by your eye care practitioner. After cleaning, thoroughly rinse lenses with Bausch & Lomb Splash Saline Solution by holding the lens between the index finger and the thumb or placing it in the palm of the hand. Direct a steady stream of Bausch & Lomb Splash Saline Solution onto the lens. Heat (thermal) Disinfection - Use fresh Splash Saline Solution when heat disinfecting. Follow the directions provided with your disinfecting unit. Chemical Disinfection (Including hydrogen peroxide systems, such as EasySept Hydro+) - Following disinfection, rinse lenses thoroughly with Bausch & Lomb Splash Saline Solution before insertion. Protein Removal - Use Bausch & Lomb Splash Saline Solution to dissolve enzymatic cleaning tablets. - Follow directions provided with the enzymatic cleaner.

Read more less

SEEK ADVICE FROM A HEALTH PROFESSIONAL BEFORE USEWarnings -Wash hands thoroughly before use. -Do not mix with other fluids except as directed. -Do not touch ampoule tip with any other surface. -Do not use if allergic to any of the ingredients. -Do not use if twist top is broken or missing. -Do not use unless solution is clear. -if eye vision changes or eye becomes irritated, stop usage and consult a doctor. -Do not use if eye is lacerated or an object is embeded. -not for injection. -Keep out of reach of children. -Once opened, discard any unused solution. Ingredients Contents: Sodium Chloride 0.57% , Potassium Di-Hydrogen Phosphate 0.68%, Sodium Hydroxide 0.15%, Purified WaterDirection 1.Detach a uni-dose ampoule. 2. Twist off detachable top. 3. Dispense solution into a cup. 4. Invert cup over open eye and blink.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL. IF SYMPTOMS PERSIST, SEE YOUR HEALTH PROFESSIONAL.Description Moisturizes your lenses with sodium hyaluronate, a naturally occurring substance found in your eyes.- Sodium hyaluronate forms a moisture cushion so eyes stay refreshed and comfortable.- Fortified with essential electrolytes found in natural tears.- With OcuPure as a gentle disappearing preservative. For use with all types of contact lenses, ideal for all disposable lenses. Moisturizes your lenses with sodium hyaluronate, a naturally occuring substance found in your eyes.Ingredients Blink contacts eye drops is a sterile, buffered isotonic solution containing 0.15% sodium hyaluronate, purified water, boric acid, sodium chloride, potassium chloride, sodium borate, calcium chloride, magnesium chloride and 0.005% OcuPure as preservative.Direction USAGE ADVICE Place 1 or 2 drops in each lens as required. Please 1 or 2 drops in each lens as required. Blink several times to freshen the eye. Use as often as required.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL. IF SYMPTOMS PERSIST, SEE YOUR HEALTH PROFESSIONAL.Description Over the course of the day, a film of protein and other material can build up on your contact lenses, irritating your eyes and clouding your vision. This is especially true when wearing lenses for extended periods.Blink-N-Clean Lens Drops do more than just rewet lenses. A few drops of the exclusive dual-cleansing formula gently flushes away debris and protein buildup to leave your lenses feeling clean and fresh and your eyes comfortable.Now, just a few drops of Blink-N-Clean Lens Drops actually helps remove and prevent protein buildup, reducing the need to stop and remove your lenses to clean them.Warnings For external use only. Keep out of reach of children. Contents are sterile if seal is intact. If irritation develops, discontinue use and consult your eye care practitioner Ingredients Blink-N-Clean is a sterile, buffered isotonic solution containing purified water, tromethamine, sodium chloride, hypromellose, edetate disodium, tyloxapol and polyhexamethylene biguanide 0.0001%.Direction To help prevent protein film buildup, promote clean lenses during wear and lubricate and rewet your lenses. Apply or 2 drops to each eye, up to four times per day, then blink several times. To avoid contamination, do not touch tip to any surface. Replace cap tightly after use.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Description Biotrue® Multi-Purpose Solution Benefits: Inspired by the biology of your eyes®Biotrue® Multi-Purpose Solution incorporates a lubricant also found in your eyes, and is balanced to match the pH of healthy tears. Biotrue® Multi-Purpose Solution cushions and rehydrates lenses for comfortable wear. Biotrue® Multi-Purpose Solution helps prevent certain tear proteins from denaturing for clean lenses and inhibits the formation of deposits that can cause discomfort and can shorten lens wearing time. By keeping lenses hydrated and clean, Biotrue® Multi-Purpose Solution makes wearing contact lenses comfortable all day.Biotrue®Multi-Purpose Solution. A solution that works like your eyes.Warnings Problems with contact lenses and lens care products could result in corneal infection and/ or ulcer and lead to loss of vision. Ingredients A sterile, isotonic solution that contains hyaluronan, sulfobetaine, poloxamine, boric acid, sodium borate, edetate disodium and sodium chloride and preserved with a dual disinfection system (polyaminopropyl biguanide) 0.00013% and polyquaternium 0.0001%.Direction To condition, clean, remove protein and disinfect lenses, complete these simple steps. This daily regimen is recommended by Bausch + Lomb for a healthy and comfortable contact lens wearing experience: Step 1: Place 3 drops of Biotrue® multi-purpose solution on each side of the lens surface and gently rub for 20 seconds. Step 2: Thoroughly rinse each side of the lens for 5 seconds with Biotrue® multi-purpose solution. Step 3: Place cleaned contact lens in the lens case and fill with fresh Biotrue® multi-purpose solution. Soak at least 4 hours. Remember to always discard solution from lens case after each use. Always discard solution from lens case after each use. Keep the bottle tightly closed when not in use. Store at room temperature. Use before the expiration date marked on the carton and bottle. Keep out of reach of children. For external use only. Discard remaining solution within 90 days after opening.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients A sterile, isotonic solution that contains HYDRANATE® (hydroxyalkylphosphonate), boric acid, edetate disodium, poloxamine, sodium borate and sodium chloride; preserved with DYMED™ (polyaminopropyl biguanide) 0.0001%.Direction To clean, disinfect and remove protein daily, complete these simple steps. This daily regimen is recommended by BAUSCH + LOMB for a healthy and comfortable contact lens wearing experience: Step 1 Place 3 drops of renu fresh multi-purpose solution on each side of the lens surface and gently rub for 20 seconds. Step 2 Thoroughly rinse each side of the lens for 5 seconds with renu fresh multi-purpose solution. Step 3 Place cleaned contact lens in the lens case and fill with fresh renu fresh multi-purpose solution. Soak at least 4 hours. Remember to always discard solution from lens case after each use.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients A sterile, aqueous, buffered solution that contains poloxamine, hydroxyalkylphosphonate, boric acid, sodium borate, sodium chloride, hydroxypropylmethyl cellulose, Glucam, and preserved with chlorhexidine gluconate (0.003%), polyaminopropyl biguanide (0.00005%).Direction Remove the imprinted neckband. Do not use the solution if the imprinted neckband is broken or missing. 1. Wash your hands with midl soap and dry thoroughly. 2. Place lenses in empty lens case and fill with fresh Boston Simplus Multi-Action Solution. Soak lenses for at least four (4) hours or overnight before wearing. 3. Wash hands with mild soap and dry thoroughly before cleaning (rubbing) lenses. After soaking, remove lenses from lens case and rub both sides of the lenses carefully with four (4) drops of Boston Simplus Multi-Action Solution in the palm of your hand for twenty (20) seconds. No separate daily cleaner is required. 4. Rinse for approximately five (5) seconds with a steady stream of Boston SIMPLUS Multi-Action Solution to eliminate loosened surface deposits and insert lenses. 5. Discard solution from lens case after each use. Thoroughly clean the lens case with digital rubbing with fresh, sterile disinfecting solution. Cleaning should be followed by rinsing with fresh, sterile disinfecting solutions (never use water) and wiping the lens cases with a fresh, clean tissue is recommended. Air-drying or recapping the lens case lids after use without any additional cleaning methods should be avoided. If air drying, be sure that no residual solution remains in the case before allowing it to air dry.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Description Biotrue® Multi-Purpose Solution Benefits: Inspired by the biology of your eyes®Biotrue® Multi-Purpose Solution incorporates a lubricant also found in your eyes, and is balanced to match the pH of healthy tears. Biotrue® Multi-Purpose Solution cushions and rehydrates lenses for comfortable wear. Biotrue® Multi-Purpose Solution helps prevent certain tear proteins from denaturing for clean lenses and inhibits the formation of deposits that can cause discomfort and can shorten lens wearing time. By keeping lenses hydrated and clean, Biotrue® Multi-Purpose Solution makes wearing contact lenses comfortable all day.Biotrue®Multi-Purpose Solution. A solution that works like your eyes.Warnings Problems with contact lenses and lens care products could result in corneal infection and/ or ulcer and lead to loss of vision. Ingredients A sterile, isotonic solution that contains hyaluronan, sulfobetaine, poloxamine, boric acid, sodium borate, edetate disodium and sodium chloride and preserved with a dual disinfection system (polyaminopropyl biguanide) 0.00013% and polyquaternium 0.0001%.Direction To condition, clean, remove protein and disinfect lenses, complete these simple steps. This daily regimen is recommended by Bausch + Lomb for a healthy and comfortable contact lens wearing experience: Step 1: Place 3 drops of Biotrue® multi-purpose solution on each side of the lens surface and gently rub for 20 seconds. Step 2: Thoroughly rinse each side of the lens for 5 seconds with Biotrue® multi-purpose solution. Step 3: Place cleaned contact lens in the lens case and fill with fresh Biotrue® multi-purpose solution. Soak at least 4 hours. Remember to always discard solution from lens case after each use. Always discard solution from lens case after each use. Keep the bottle tightly closed when not in use. Store at room temperature. Use before the expiration date marked on the carton and bottle. Keep out of reach of children. For external use only. Discard remaining solution within 90 days after opening.

Read more less

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients A sterile, isotonic solution that contains HYDRANATE® (hydroxyalkylphosphonate), boric acid, edetate disodium, poloxamine, sodium borate and sodium chloride; preserved with DYMEDTM (polyaminopropyl biguanide) 0.0001%.Direction To clean, disinfect and remove protein daily, complete these simple steps. This daily regimen is recommended by BAUSCH + LOMB for a healthy and comfortable contact lens wearing experience: Step 1 Place 3 drops of renu fresh multi-purpose solution on each side of the lens surface and gently rub for 20 seconds. Step 2 Thoroughly rinse each side of the lens for 5 seconds with renu fresh multi-purpose solution. Step 3 Place cleaned contact lens in the lens case and fill with fresh renu fresh multi-purpose solution. Soak at least 4 hours. Remember to always discard solution from lens case after each use.

Read more less