ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients A sterile, aqueous, buffered solution that contains poloxamine, hydroxyalkylphosphonate, boric acid, sodium borate, sodium chloride, hydroxypropylmethyl cellulose, Glucam, and preserved with
chlorhexidine gluconate (0.003%), polyaminopropyl biguanide (0.00005%).
Direction Remove the imprinted neckband. Do not use the solution if the imprinted neckband is broken or missing. 1. Wash your hands with midl soap and dry thoroughly. 2. Place lenses in empty lens case and fill with fresh Boston Simplus Multi-Action Solution. Soak lenses for at least four (4) hours or overnight before wearing.
3. Wash hands with mild soap and dry thoroughly before cleaning (rubbing) lenses. After soaking, remove lenses from lens case and rub both sides of the lenses carefully with four (4) drops of Boston Simplus Multi-Action Solution in the palm of your hand for twenty (20) seconds. No separate daily cleaner is required.
4. Rinse for approximately five (5) seconds with a steady stream of Boston SIMPLUS Multi-Action Solution to eliminate loosened surface deposits and insert lenses.
5. Discard solution from lens case after each use. Thoroughly clean the lens case with digital rubbing with fresh, sterile disinfecting solution. Cleaning should be followed by rinsing with fresh, sterile disinfecting solutions (never use water) and wiping the lens cases with a fresh, clean tissue is recommended. Air-drying or recapping the lens case lids after use without any additional cleaning methods should be avoided. If air drying, be sure that no residual solution remains in the case before
allowing it to air dry.
