Ingredients not applicableDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Description Specially made to create brighter and bolder eyes without overpowering your peepers’ true prettiness. Creats a more open and popping results that is sure to wow! Step up your sensual style to the next level with Ardell!Ingredients Acrylates / Ethylhexyl Acrylate Copolymer.Direction Start by cleaning your natural lashes with a gentle cleanser to remove any oils or debris.
Choose the appropriate length and thickness of the Ardell Extension FX B-Curl lashes for your desired look.
Using tweezers, carefully remove the lashes from the tray and apply a small amount of lash adhesive to the band.
Wait a few seconds for the adhesive to become tacky before applying the lashes to your natural lash line.
Starting from the outer corner of your eye, gently press the lashes onto your natural lashes, making sure they are securely attached.
Repeat the process for the other eye, ensuring that both sets of lashes are symmetrical.
Once the adhesive has dried, use a lash comb or brush to blend the Ardell Extension FX B-Curl lashes with your natural lashes.
For best results, avoid using oil-based makeup removers or products on your lashes, as this can weaken the adhesive and cause the lashes to fall off prematurely.
To remove the lashes, gently peel them off from the outer corner of your eye and use a makeup remover to clean any remaining adhesive from your natural lashes.
Description The revolutionary false lash application is here! Ardell Aqua Lashes are water activated lashes that require no additional adhesive. The lashes are lined with adhesive that is activated by water. Ardell Aqua Lashes 343 are natural look lashes with tapered tips and a black band to mimic the look of eyeliner.Ingredients Water (Aqua, Eau), Acacia Senegal Gum, Casein, PVP.Direction 1. Check fit: Align band with natural lash line to check for fit. Remove lash tabs by trimming each end. Trim any excess lash for fit if necessary.
2. Activate adhesive: Immerse lash band in warm water for 10-15 seconds. Ensure lash band is fully saturated before applying to lash line.
3. Apply lashes: Secure lash band by pressing onto lash line.
Removal: To remove, saturate a cotton swab with water and apply along the lash band. Gently peel away lash strip, starting from the outer corner and slowly moving toward the inner corner.
Description Ardell provides another easy to use lash innovation! New and existing lash users will not have to fuss over and tackle applying adhesive to false lashes, we’ve done that work for you. As simple as dipping in water activates Aqua Lashes and all you have to do is apply it to your lash line. Beautiful lashes in 2 easy steps.- The lashes are lined with adhesive that is activated by water- Application in 2 easy steps – 1. dip lash band in water 2. apply to lash line- Beautiful, lush styles in natural to dramatic looks- Lashes have tapered tips and a black band mimicking the look of eyelinerIngredients Water (Aqua, Eau), Acacia Senegal Gum, Casein, PVP.Direction 1. Check fit: Align band with natural lash line to check for fit. Remove lash tabs by trimming each end. Trim any excess lash for fit if necessary.
2. Activate adhesive: Immerse lash band in warm water for 10-15 seconds. Ensure lash band is fully saturated before applying to lash line.
3. Apply lashes: Secure lash band by pressing onto lash line.
Removal: To remove, saturate a cotton swab with water and apply along the lash band. Gently peel away lash strip, starting from the outer corner and slowly moving toward the inner corner.
Description Ardell provides another easy to use lash innovation! New and existing lash users will not have to fuss over and tackle applying adhesive to false lashes, we’ve done that work for you. As simple as dipping in water activates Aqua Lashes and all you have to do is apply it to your lash line. Beautiful lashes in 2 easy steps.- The lashes are lined with adhesive that is activated by water- Application in 2 easy steps – 1. dip lash band in water 2. apply to lash line- Beautiful, lush styles in natural to dramatic looks- Lashes have tapered tips and a black band mimicking the look of eyelinerIngredients Water (Aqua, Eau), Acacia Senegal Gum, Casein, PVP.Direction 1. Check fit: Align band with natural lash line to check for fit. Remove lash tabs by trimming each end. Trim any excess lash for fit if necessary.
2. Activate adhesive: Immerse lash band in warm water for 10-15 seconds. Ensure lash band is fully saturated before applying to lash line.
3. Apply lashes: Secure lash band by pressing onto lash line.
Removal: To remove, saturate a cotton swab with water and apply along the lash band. Gently peel away lash strip, starting from the outer corner and slowly moving toward the inner corner.
Description Create beautiful brows in an instant.Enhance your beauty with brows that frame the face and define eyes using 1000Hour tinted light brown/blonde eyebrow gel Natural-looking buildable colour boosts brow depth, while a light gel base tames and sets for perfect shape.• Brush-on tinted eyebrow gel• Long-wearing• Natural-looking• Buildable colourSize: 6G Ingredients Aqua, Glycerin, Copernicia Cerifera (Carnauba) Wax, PVP, Stearic Acid, Sorbitan Sesquioleate, Cera Alba, Triethanolamine, Polyacrylic Acid, Phenoxyethanol, Methylparaben, Propylparaben. Colous: CI77891, CI77492, CI77491
Description Glam By Manicare® Flexi Lashes are extremely comfortable with a stretchy and bendy invisible band that perfectly fits your eye line, follows your eyes’ movement, and stays on well from end to end.From a natural finish to a dramatic lash effect, Glam By Manicare® has lashes to suit every occasion.- Invisible band- Lightweight- Reusable up to 5 times- Hypoallergenic and latex-free adhesive included- Cruelty-FreeSize: 1 Pair Warnings Warning: Keep out of reach of children. Do not apply adhesive directly to eyelids. For external use only. Avoid direct contact with eyes. If irritation occurs, rinse immediately with water. Store below 30°C. Ingredients Glue: Acrylates/Ethylhexyl Acrylate Copolymer, Propylene Glycol, Phenoxyethanol, Ethylhexylglycerin. MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
1. Measure the lashes against your eye and trim band to correct length.
2. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
3. Apply a thin coat of included adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
4. Gently press the applicator above the natural lashes along the natural lash line. Release lash applicator once entire lash is secure.
Ingredients Water (Aqua, Eau), Rubber Latex, Cellulose Gum, Sodium Dodecylbenzenesulfonate, Ammonium Hydroxide, Fragrance (Parfum), Coumarin, Geraniol, Limonene, Linalool, Formaldehyde.Direction 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set.3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Glam By Manicare® uses a tech smart clear eyeliner with lash adhesive for seamless and express application. Simply apply the clear eyeliner along top of lash line and press strip lashes on top for instant application.Create a flawless lash look with the long lasting and waterproof clear adhesive eyeliner paired with lightweight clear banded lashes for invisible application designed to last all day.- Quick & easy- Up to 30 uses- Precise felt tip- Cruelty free- Hypo-allergenic- Latex freeWarnings Shake well before use. Patch test prior to use to determine any sensitivity and do not use if any irritation occurs. Avoid direct contact with eyes and contact lenses. In case of eye contact, rinse immediately with water. Eyeliner can be removed using make up remover. Latex free. Not suitable for magnetic lashes. Ingredients Ingredients: Water (Aqua), Styrene/Acrylates Copolymer, Propylene Glycol, Polyvinyl Alcohol, Polysorbate 80, Phenoxyethanol, Caprylyl Glycol, Ethylhexylglycerin. GMCE01Direction 1. Try on lashes to check fit & trim if needed.
2. Apply eyeliner on the top of eye lid along natural lash line.
3. Immediately apply lash on top of eyeliner & press to adhere.
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Glam By Manicare® Flexi Lashes are extremely comfortable with a stretchy and bendy invisible band that perfectly fits your eye line, follows your eyes’ movement, and stays on well from end to end.From a natural finish to a dramatic lash effect, Glam By Manicare® has lashes to suit every occasion.- Invisible band- Lightweight- Reusable up to 5 times- Hypoallergenic and latex-free adhesive included- Cruelty-FreeSize: 1 Pair Warnings Warning: Keep out of reach of children. Do not apply adhesive directly to eyelids. For external use only. Avoid direct contact with eyes. If irritation occurs, rinse immediately with water. Store below 30°C. Ingredients Glue: Acrylates/Ethylhexyl Acrylate Copolymer, Propylene Glycol, Phenoxyethanol, Ethylhexylglycerin. MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
1. Measure the lashes against your eye and trim band to correct length.
2. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
3. Apply a thin coat of included adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
4. Gently press the applicator above the natural lashes along the natural lash line. Release lash applicator once entire lash is secure.
Description Glam By Manicare® pre-glued lashes are ready to wear without the need to apply lash adhesive. Featuring a cushioned and lightweight band with glue for comfortable wear and effortless application in seconds. Simply press on lashes and go! From a natural finish to a dramatic lash effect, Glam By Manicare® has lashes to suit every occasion.Mink Effect Lashes Lightweight Cruelty FreeHypo-allergenic Latex FreeSize: 1 Pack Warnings Recommended for single use. Store in a cool, dry place. To remove, hold lash at the inner edge and pull away gently to peel off the lash line. Latex Free. Ingredients Styrene/Isoprene Copolymer, Petroleum Resins, Glyceryl Rosinate, Paraffinum Liquidum, Rosin, Polybutene, Hydrogenated Poly(C6-C20)olefin, Carbon Black, Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnimate.Direction 1. Gently peel the lash off tray from one side.
2. Try on lashes to check fit & trim if needed.
3. Apply along lash line & press in place lightly.HOT TIP: Lash application should be the last step in your make up routine.
Warnings DO NOT apply adhesive directly to eyelids. Ingredients Acrylates/Ethylhexyl Acrylate Copolymer, PropyleneGlycol, Phenoxyethanol, Ethylhexylglycerin, MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
- Measure the lashes against your eye and trim band to correct length (about 80% of your eye width).
-Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
-Apply a thin coat of adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
-Gently press the applicator above the natural lashes along the natural lash line.
-Release lash applicator once entire lash is secure.Lash application should be the last step in your eye make-up routine.
Description 2 full-bodied lashes with wispy edges for a dramatic lash effect.Includes Hypoallergenic eyelash adhesive.Warnings DO NOT apply adhesive directly to eyelids. Ingredients Water, Styrene/Acrylates/Ammonium/Methacrylate Copolymer, Ethylparaben, MethylparabenDirection 1. For best results curl your lashes and apply one coat of mascara before applying lashes.
2. Measure the lashes against your eye and trim band to correct length (about 8% of your eye width).
3. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
4. Apply a thin coat of adhesive to lash band. Wait 2-3 seconds until glue becomes sticky. This will ensure the lashes stick properly.
5. Gently press the applicator above the natural lashes along the natural lash line.
6. Release lash applicator once entire lash is secure.Lash application should be the last step in your eye makeup routine.
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients not applicableDirection Easy 3 Step Application: 1. Align band with natural lash line to check fit. Trim excess if necessary. 2. Apply a thin line of adhesive along band. Wait 30 seconds to set. 3. Secure lash band by pressing onto lash line.
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients not applicableDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil.
3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye.
CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients not applicableDirection Use with Ardell Magnetic Gel Liner.
Application Instructions: Apply two coats of Magnetic Gel Liner along the upper lash line. Place Magnetic Lashes on Magnetic Gel Liner while liner is still semi-wet and gently press down to secure.
Ingredients not applicableDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil.
3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye.
CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
