Ingredients Rosin (Colophonium, Colophane), Styrene/Isoprene Copolymer, Polyethylene Terephthalate – Made in Korea; Lashes made in IndonesiaDirection HOW TO APPLY:
Pluck a cluster from the tray
Place the cluster underneath your natural lashes
Squeeze clusters and natural lashes together with the applicator
HOW TO REMOVE:
With clean hands, use your finger to remove the clusters by gently lifting them off, starting with the band side
Description Lash in a flash, with no damage to your natural lashes, and no sticky residue to remove. Kit has enough clusters for 2-3 applications Includes 20 pre-bonded clusters No glue needed Secure 24-hour hold No damage to natural lashes Easy removal with no residue Falsie clusters go under your natural lashes New, innovative nonstick applicatorIngredients Rosin (Colophonium, Colophane), Styrene/Isoprene Copolymer, Polyethylene Terephthalate – Made in Korea; Lashes made in IndonesiaDirection HOW TO APPLY:
Pluck a cluster from the tray
Place the cluster underneath your natural lashes
Squeeze clusters and natural lashes together with the applicator
HOW TO REMOVE:
With clean hands, use your finger to remove the clusters by gently lifting them off, starting with the band side
Description Starter Kit: A DIY salon-style lash extension alternative with gentle ingredients. What’s so unique about Falscara? Unlike traditional falsies, Falscara WISPS are tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible. That’s what makes them look so natural. Value priced kit includes: BOND & SEAL to prep lashes and hold WISPS, 4.5 g (0.15 oz.) each; 10 WISPS–featherlight fibers that go under your natural lashes; APPLICATOR- for optimal WISP placement. For long wear, use with OVERNIGHTER Long Wear Sealer (sold separately and in the Falscara Complete DIY Lash Extensions Kit) WISPS are rewearable up to 3x Each item in the Falscara system, including value-priced WISP multipacks, also sold separately Wisps-10- 12mmIngredients BOND:
Acrylates/Ethylhexyl Acrylate Copolymer, Butylene Glycol, Alcohol Denat., Water, AMP-Acrylates Copolymer, Phenoxyethanol, Citric Acid, Sodium Carbonate, Sorbitol, Ceteareth-25, Ethylhexylglycerin, Urea, Disodium Phosphate, Biotin, Black 2 NET WT 4.5 g (0.15 oz.)
SEAL:
Isododecane, Water, Copernicia Cerifera (Carnauba) Wax, VP/Eicosene Copolymer, Euphorbia Cerifera (Candelilla) Wax, Ceresin, Trimethylsiloxysilicate, VP/VA Copolymer, Panthenol, Hydrogenated Polyisobutene, PEG-60 Hydrogenated Castor Oil, Phenoxyethanol, Polypropylsilsesquioxane, 1,2-Hexanediol, Ethylhexylglycerin, Tocopheryl Acetate NET WT 4.5 g (0.15 oz.)Direction HOW TO APPLY:
Brush a light coat of BOND on natural lashes. A little goes a long way!
Use the included APPLICATOR to pluck a WISP from the tray. Pick up a WISP from the middle-outer end for optimal control. One by one, gently place the WISPS underneath the base of your natural lashes, slightly away from the waterline. Apply wisps starting from the outer corner of lash line, working inwards (or vice versa). Place WISPS right next to each other for a seamless look
Dab a thin coat of SEAL under WISPS to eliminate any sticky residue and hold WISPS in place. Pro tips: If needed, after applying SEAL under WISPS, use the APPLICATOR or your fingers to squeeze the WISPS against your natural lashes; this helps the WISPS adhere for a more secure hold
HOW TO REMOVE:
Saturate a cotton pad with Falscara REMOVER or oil-free makeup remover
Place pad over eyes for 10 seconds, then gently wipe or peel off WISPS and BOND & SEAL
HOW TO REUSE WISPS:
Place used WISPS on a paper towel, coat with Falscara REMOVER or oil-free makeup remover, then let sit for 10 seconds
Saturate a cotton swab with remover and gently wipe away BOND & SEAL residue from the WISPS. Store WISPS in original packaging
Description A DIY salon-style lash extension alternative with gentle ingredients. Multitasker remover provides gentle, easy, non-damaging removal of FALSCARA and eye makeup NET WT 50 ml (1.69 fl oz.) Effortlessly removes WISPS after you've worn them for a day or for up to 10 days Compatible with OVERNIGHTER Long Wear Sealer (sold separately and in Falscara Complete DIY lash Extensions Kit)Size: 50ml Warnings IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do so.
Read directions for use carefully
Keep out of reach of children
Discontinue use if irritation occurs
Do not use if you are suffering from eye inflammation or conjunctivitis Ingredients Water, Cyclopentasiloxane, Cyclohexasiloxane, lsohexadecane, Butylene Glycol, Rosa Damascena Flower Water, Sodium Citrate, Benzalkonium Chloride, Cetrimonium Chloride, Benzyl Alcohol, Poloxamer 184, Disodium EDTA, Citric Acid, Dipotassium Glycyrrhizate, Glycyrrhiza Glabra (Licorice) Root Extract, Chamomilla Recutita (Matricaria) Flower/Leaf Extract, Isopropyl Alcohol, Portulaca Oleracea Extract, Phenoxyethanol, Fragrance, Red 40Direction HOW TO REMOVE:
Shake well!
Take a cotton pad and saturate with REMOVER.
Place over eyes; hold for 10 seconds to let REMOVER work its magic!
Gently wipe away to remove WISPS* and BOND & SEAL*
Repeat as necessary until there is no more BOND & SEAL residue left.
*sold separately
HOW TO CLEAN & REUSE:
Place WISPS on a cotton pad or paper towel
Drop some REMOVER onto the WISPS. Let sit for 10 seconds
Saturate a cotton swab with REMOVER & work gently to wipe away any BOND & SEAL residue on the WISPS
Repeat until WISPS are clean and ready to be used again!
To store WISPS for reuse, open the holder and place WISPS inside
Share Share on Facebook
Description DIY salon-style lash extension alternative with gentle ingredients. What’s so unique about Falscara? Unlike traditional falsies, Falscara WISPS are tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible. That’s what makes them look so natural. Use BOND & SEAL with Falscara WISPS--tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible.
Includes: BOND-to prime & prep lashes. SEAL-to remove residue and hold WISPS in place
BOND & SEAL also comes in value-priced Falscara Kits
WISPS are reusable up to 3x with proper care
Use with Falscara WISPS, APPLICATOR, and REMOVER (sold separately)
For long wear, use with OVERNIGHTER Long Wear Sealer (sold separately and in the new Falscara Complete DIY lash Extensions Kit)
Boxed Contents: Falscara Bond & Seal applicationSize: 4.5g Warnings Keep out of reach of children
Avoid contact with eyes, if contact occurs, wash immediately with lukewarm water
Do not use if you are suffering from eye inflammation or conjunctivitis Ingredients BOND:
Acrylates/Ethylhexyl Acrylate Copolymer, Butylene Glycol, Alcohol Denat., Water, AMP-Acrylates Copolymer, Phenoxyethanol, Citric Acid, Sodium Carbonate, Sorbitol, Ceteareth-25, Ethylhexylglycerin, Urea, Disodium Phosphate, Biotin, Black 2 NET WT 4.5 g (0.15 oz.)
SEAL:
Isododecane, Water, Copernicia Cerifera (Carnauba) Wax, VP/Eicosene Copolymer, Euphorbia Cerifera (Candelilla) Wax, Ceresin, Trimethylsiloxysilicate, VP/VA Copolymer, Panthenol, Hydrogenated Polyisobutene, PEG-60 Hydrogenated Castor Oil, Phenoxyethanol, Polypropylsilsesquioxane, 1,2-Hexanediol, Ethylhexylglycerin, Tocopheryl Acetate NET WT 4.5 g (0.15 oz.)Direction HOW TO APPLY:
Brush a light coat of BOND on natural lashes. A little goes a long way!
Use the included APPLICATOR to pluck a WISP from the tray. Pick up a WISP from the middle-outer end for optimal control. One by one, gently place the WISPS underneath the base of your natural lashes, slightly away from the waterline. Apply wisps starting from the outer corner of lash line, working inwards (or vice versa). Place WISPS right next to each other for a seamless look
Dab a thin coat of SEAL under WISPS to eliminate any sticky residue and hold WISPS in place. Pro tips: If needed, after applying SEAL under WISPS, use the APPLICATOR or your fingers to squeeze the WISPS against your natural lashes; this helps the WISPS adhere for a more secure hold
HOW TO REMOVE:
Saturate a cotton pad with Falscara REMOVER or oil-free makeup remover
Place pad over eyes for 10 seconds, then gently wipe or peel off WISPS and BOND & SEAL
Ingredients magnetic Eyeliner: Water, Propylene Glycol, CI 77266, CI 77499, Styrene/Acrylates Copolymer, Ethylhexylglycerin, Phenoxyethanol, Caprylyl Glycol.?Eyelash: Synthetic Silk FiberDirection How to apply: 1. Thinly line eyelid with the magnetic eyeliner.
2. Once liner is dry, place eyelash strip on top of your natural lash to check fit. If the lash strip extends beyond your natural lash line, trim?from the outer edge of the strip.
3. After sizing the lash place on top of the magnetic eyeliner.
Ingredients magnetic Eyeliner: Water, Propylene Glycol, CI 77266, CI 77499, Styrene/Acrylates Copolymer, Ethylhexylglycerin, Phenoxyethanol, Caprylyl Glycol.?Eyelash: Synthetic Silk FiberDirection How to apply: 1. Thinly line eyelid with the magnetic eyeliner.
2. Once liner is dry, place eyelash strip on top of your natural lash to check fit. If the lash strip extends beyond your natural lash line, trim?from the outer edge of the strip.
3. After sizing the lash place on top of the magnetic eyeliner.
Ingredients magnetic Eyeliner: Water, Propylene Glycol, CI 77266, CI 77499, Styrene/Acrylates Copolymer, Ethylhexylglycerin, Phenoxyethanol, Caprylyl Glycol.?Eyelash: Synthetic Silk FiberDirection How to apply: 1. Thinly line eyelid with the magnetic eyeliner.
2. Once liner is dry, place eyelash strip on top of your natural lash to check fit. If the lash strip extends beyond your natural lash line, trim?from the outer edge of the strip.
3. After sizing the lash place on top of the magnetic eyeliner.
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. Wait 30 seconds to set. 3) Apply Lashes: Secure lash band by pressing onto lash line
Ingredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Ingredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Ingredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients DUO ADHESIVE Ingredients: Acrylates/Ethylhexyl Acrylate Copolymer, Alcohol Denat.Direction Easy 3 Step Application:
Align band with natural lash line to check fit. Trim excess if necessary.
Apply a thin line of adhesive along band. Wait 30 seconds to set.
Secure lash band by pressing onto lash line.
Ingredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Description Specially made to create brighter and bolder eyes without overpowering your peepers’ true prettiness. Creats a more open and popping results that is sure to wow! Step up your sensual style to the next level with Ardell!Ingredients Acrylates / Ethylhexyl Acrylate Copolymer.Direction Start by cleaning your natural lashes with a gentle cleanser to remove any oils or debris.
Choose the appropriate length and thickness of the Ardell Extension FX B-Curl lashes for your desired look.
Using tweezers, carefully remove the lashes from the tray and apply a small amount of lash adhesive to the band.
Wait a few seconds for the adhesive to become tacky before applying the lashes to your natural lash line.
Starting from the outer corner of your eye, gently press the lashes onto your natural lashes, making sure they are securely attached.
Repeat the process for the other eye, ensuring that both sets of lashes are symmetrical.
Once the adhesive has dried, use a lash comb or brush to blend the Ardell Extension FX B-Curl lashes with your natural lashes.
For best results, avoid using oil-based makeup removers or products on your lashes, as this can weaken the adhesive and cause the lashes to fall off prematurely.
To remove the lashes, gently peel them off from the outer corner of your eye and use a makeup remover to clean any remaining adhesive from your natural lashes.
Ingredients Ingredients:
1. Brow Affix: Water (Aqua, Eau), Octoxynol-1, Propylene Carbonate, Ammonium Sulfate.
2. Style Solution: Water (Aqua, Eau), Ethanolamine, Thioglycerin, Propylene Glycol, Keratin, Hydroxyethylcellulose, Calcium Disodium EDTA,
3. Neutralizer: Water (Aqua, Eau), Cetearyl Alcohol, Mineral Oil (Paraffinum Liquidum, Hulle Minérale), Caprylic/Capric Triglyceride, Glyceryl Stearate, Parraffin, Disodium Phosphate, Sodium Carbonate, Hydroxyethylcellulose, Methylparaben, DMDM Hydantoin, Hydrogenated Castor Oil, Collagen, Frangrance (Parfum), Yellow 6 (CI 15985)Direction DIRECTIONS:
1. Make sure brows are clean.
2. Using the spoolie, brush brows upward or in desired direction.
3. Apply Brow Affix (bottle 1) onto small section of hair. Using the mini comb, brush hair upward and continue to work into small sections throughout brow.
4. Using the cotton swab (not provided) dip into Style Solutions (bottle 2) and apply onto brows. Cover brows with plastic film. Leave Style Solution on for 5 minutes.
5. Gently remove plastic film from brows. Using the clear mini comb brush brow hair upwards to remove excess glue and style solution.
6. Using cotton swab (not provided) dip into Neutralizer (bottle 3) and apply onto brows. Cover brows with plastic film. Leave Neutralizer on for 5 minutes.
7. Remove plastic film. Lightly moisten a paper towel with water and blot brows to thoroughly remove Neutralizer.
8. Wait 2 minutes for brows to fully set. Apply Treatment Oil (bottle 4) onto brows with spoolie. Blot excess Treatment oil with paper towel.
AFTER LAMINATION PROCESS:
1. Keep brows dry & avoid steam & water for 24 hours.
2. Trim and shape brows as desired.
3. To ensure brows remain healthy and in good shape, retouch is not recommended between 4-6 weeks.
Description The revolutionary false lash application is here! Ardell Aqua Lashes are water activated lashes that require no additional adhesive. The lashes are lined with adhesive that is activated by water. Ardell Aqua Lashes 343 are natural look lashes with tapered tips and a black band to mimic the look of eyeliner.Ingredients Water (Aqua, Eau), Acacia Senegal Gum, Casein, PVP.Direction 1. Check fit: Align band with natural lash line to check for fit. Remove lash tabs by trimming each end. Trim any excess lash for fit if necessary.
2. Activate adhesive: Immerse lash band in warm water for 10-15 seconds. Ensure lash band is fully saturated before applying to lash line.
3. Apply lashes: Secure lash band by pressing onto lash line.
Removal: To remove, saturate a cotton swab with water and apply along the lash band. Gently peel away lash strip, starting from the outer corner and slowly moving toward the inner corner.
Description Ardell provides another easy to use lash innovation! New and existing lash users will not have to fuss over and tackle applying adhesive to false lashes, we’ve done that work for you. As simple as dipping in water activates Aqua Lashes and all you have to do is apply it to your lash line. Beautiful lashes in 2 easy steps.- The lashes are lined with adhesive that is activated by water- Application in 2 easy steps – 1. dip lash band in water 2. apply to lash line- Beautiful, lush styles in natural to dramatic looks- Lashes have tapered tips and a black band mimicking the look of eyelinerIngredients Water (Aqua, Eau), Acacia Senegal Gum, Casein, PVP.Direction 1. Check fit: Align band with natural lash line to check for fit. Remove lash tabs by trimming each end. Trim any excess lash for fit if necessary.
2. Activate adhesive: Immerse lash band in warm water for 10-15 seconds. Ensure lash band is fully saturated before applying to lash line.
3. Apply lashes: Secure lash band by pressing onto lash line.
Removal: To remove, saturate a cotton swab with water and apply along the lash band. Gently peel away lash strip, starting from the outer corner and slowly moving toward the inner corner.
Description Ardell provides another easy to use lash innovation! New and existing lash users will not have to fuss over and tackle applying adhesive to false lashes, we’ve done that work for you. As simple as dipping in water activates Aqua Lashes and all you have to do is apply it to your lash line. Beautiful lashes in 2 easy steps.- The lashes are lined with adhesive that is activated by water- Application in 2 easy steps – 1. dip lash band in water 2. apply to lash line- Beautiful, lush styles in natural to dramatic looks- Lashes have tapered tips and a black band mimicking the look of eyelinerIngredients Water (Aqua, Eau), Acacia Senegal Gum, Casein, PVP.Direction 1. Check fit: Align band with natural lash line to check for fit. Remove lash tabs by trimming each end. Trim any excess lash for fit if necessary.
2. Activate adhesive: Immerse lash band in warm water for 10-15 seconds. Ensure lash band is fully saturated before applying to lash line.
3. Apply lashes: Secure lash band by pressing onto lash line.
Removal: To remove, saturate a cotton swab with water and apply along the lash band. Gently peel away lash strip, starting from the outer corner and slowly moving toward the inner corner.
Description 1000HOUR™ brush-in gel formula uses a gentle plant extract colour gel. Ideal for more sensitive skin or those who cannot use peroxide-based products, making it a perfect alternative to daily lash and brow makeup application, or expensive brow clinic visits. • Dermatologically & Ophthalmologically tested• No smudge, waterproof colour for eyelashes and brows• Results that last up to six-weeks (in line with your natural lash turnover)• Quick and easy to use• 12 applications per pack (12-month supply)• Beautiful, professional results• Natural looking shades to enhance lashes and brows• Assembled in Australia from imported components. Colour Crème and Developer Gel made in EU • Product ingredients include nutsWarnings No Ingredients Colour Cream (tube 1): Aqua, Alcohol denat, (Calendula Officinalis/Safflower Flower/Achillea Millefolium Flower, Leaf and Stem/Vaccinium Myrtillus/Vitex Agnus-Castus Fruit/Rhus Chinensis Gall/Walnut Husk/Camellia Sinensis/Nettle Leaf/(Juniperus Communis Leaf and Stem/Horse Chestnut Nut/Dichroa Febrifuga Root/Grape Seed/Acacia Catechu Wood/Goldenrod/ Hypericum Perforatum Extract) Carbomer, Sodium Hydroxide. Developer Gel (tube 2): Aqua, Silver Nitrate, Ammonium Acryloyldimethyltaurate/VP Copolymer, Ammonia.Direction "1. Make sure lashes and brows are completely clean by removing natural oils as well as make up with a non-oily cleanser.
2. Lashes: Take two eye protection papers and put some Vaseline on one side of the eye protection papers. Press the papers right up under the eye and adhere to the skin as close as possible to the bottom lashes.
3. Brows: Apply Vaseline with a cotton bud on the skin around the brow to protect it from coming in contact with the dye.
4. Squeeze 2cm of the colour cream into the clean mixing cup. Then apply to the lashes using the black applicator wand as if you are applying mascara.
5. Apply to the brows at the same time using an upward motion brushing on the cream in the same direction as the hair growth.
6. Leave on for 2 minutes.
7. THEN REMOVE THE COLOUR CREAM FROM LASHES & BROWS USING A DRY COTTON PAD.
8. Squeeze 2cm of the developer gel into the clean mixing cup. Then apply to the lashes using the pink applicator wand as if you are applying mascara. Apply to the brows at the same time using an upward motion brushing on the developing gel in the same direction as the hair growth.
9. Leave on for 1 minute
10. CLEANING THE EYELASHES AND BROWS: At the end of the application time, remove excess developer gel using a damp cotton pad."
Description Create beautiful brows in an instant.Enhance your natural beauty with brows that frame the face and define eyes using 1000Hour Instant brows clear as eyebrow mascara. A brush on light gel base tames and sets brows for the perfect shape.• Brush-on clear eyebrow mascara• Long-wearing• Natural-looking• Buildable GelSuitable For: EyebrowsBoxed Contents: Brush on clear eyebrow gelSize: 6g Warnings No Ingredients Aqua, Glycerin, Copernicia Cerifera (Carnauba) Wax, PVP, Stearic Acid, Sorbitan Sesquioleate, Cera Alba, Triethanolamine, Polyacrylic Acid, Phenoxyethanol, Methylparaben, Propylparaben.Direction Apply using light upward and outward strokes to define and shape, gently blending with the tip to the outer edge to form an arch. Remove using cleanser or make-up remover.Storage Instructions Keep in a cool area. Keep tube tightly sealed when not in use.
Description Create beautiful brows in an instant.Enhance your beauty with brows that frame the face and define eyes using 1000Hour tinted light brown/blonde eyebrow gel Natural-looking buildable colour boosts brow depth, while a light gel base tames and sets for perfect shape.• Brush-on tinted eyebrow gel• Long-wearing• Natural-looking• Buildable colourSize: 6G Warnings No Ingredients Aqua, Glycerin, Copernicia Cerifera (Carnauba) Wax, PVP, Stearic Acid, Sorbitan Sesquioleate, Cera Alba, Triethanolamine, Polyacrylic Acid, Phenoxyethanol, Methylparaben, Propylparaben. Colous: CI77891, CI77492, CI77491Direction Apply using light upward and outward strokes to define and shape, gently blending with the tip to the outer edge to form an arch. Remove using cleanser or make-up remover.Storage Instructions Keep in a cool area. Keep tube tightly sealed when not in use.
