Description Features
1 Second measurement
15 Probe covers included
Ear & object temperature
Storage case included
Fever alarm
°C / °F switchable
Backlight
Low battery indicator
Auto shut-off
10 Reading memory
Batteries Included
5 Year Warranty
Ingredients Not Applicable
Direction To measure ear temperature (refer to manual for full instruction including image reference):
1. To achieve accurate readings, make sure a new, clean probe cover is in place before each measurement. Place a new probe cover on the probe firmly; making sure the probe and the inner portion of the probe cover fit snugly.
2. Press the Power Button. The display is activated to show all segments. After self-checking a ear and probe apprear on the screen (refer to manual) with beeps, so you can start a new measurement. If error messages appear, it means the thermometer is not ready for measurement.
To measure object temperature (refer to manual for image reference):
1. First eject the probe cover.
2. Aim the thermometer at the centre of the object you want to measure with a distance of 1 to 2 cm.
3. Press the POWER BUTTON to turn on the thermometer, you can take the object temperature after hearing two beep sounds.
Remarks:
This mode shows the actual, unadjusted surface temperatures, which is different from the body temperature.
How to change the ear mode and object mode:
You can press and hold S BUTTON to switch the mode between ear mode and object
mode.
After measurement (refer to manual for image reference):
1. Power off: Device will automatically shut off if left idle for more than 1 minute to extend
battery life.
2. Clean the probe after each use to ensure an accurate reading and avoid cross
contamination (See the section of Care and Cleaning for details).
Temperature indicator :
In Ear mode (refer to manual for image reference):
1. If the temperature reading is below 37.8°C(100.0°F), a happy face will be displayed
next to the reading.
2. If the temperature reading is 37.8°C(100.0°F) or above, a bad face will be displayed
next to the reading.
BackLight:
The display will only be lighted GREEN for 3 seconds when the unit is ready for measurement
and a measurement is completed. The backlight design is to the benefit of reading in the
night .
