ALWAYS READ THE LABEL AND FOLLOW DIRECTIONS FOR USE.Description ALLEVYN ADHESIVE Hydocellular Foam Dressing has an advanced triple-layer construction that combines an absorbent hydrocellular pad between a perforated adhesive wound contact layer and a highly permeable waterproof outer film that aids in the prevention of bacterial contamination of the wound.
2,7The advanced triple-layer construction facilitates dynamic fluid management to provide the optimal wound environment, which promotes moist wound healing and may help minimize the risk of maceration.
1,8 The backing film aids in the prevention of fluid and bacterial strikethrough.
2,9 The dressing can be left in place without the need for secondary fixation and is both easy to apply and remove.
1,10Suitable For: Weeping wounds
Boxed Contents: 2
Size: 7.5cm x 7.5cm Pk2
Warnings Do not cut the dressing as the bacterial barrier and fluid handling capabilities may be compromised. The use of oxidizing agents e.g. hydrogen peroxide and hypochlorite solutions should be avoided with ALLEVYN ADHESIVE as these can break down the absorbent component of the dressing.
ALLEVYN ADHESIVE is a singly use product. Re-use of this dressing may cause cross contamination which may lead to infection.
If reddening or sensitization occurs, discontinue use and see you healthcare professional.
Whilst showering, care must be taken to avoid wetting of the dressing. Do not expose the dressing to direct spray or submerge.
Ingredients Allevyn Adhesive consists of a layer of soft hydrophilic polyurethane foam, about four millimetres thick, sandwiched between a pink semi-permeable polyurethane film and a perforated polymeric wound contact layer.
Active Ingredients: Not Applicable
Direction How to apply ALLEVYN ADHESIVE?
1. Wash hands before and after treating the wound Gently clean the wound and the surrounding skin.
2. Clean and dry the skin surrounding the wound and clip any excess hair close to the wound.
3. Ensure the pad area is large enough to cover the wound completely before applying the dressing.
4. Open the pouch by peeling apart the flaps. Remove the ALLEVYN ADHESIVE dressing.
5. Start to remove the backing sheet from the ALLEVYN ADHESIVE dressing.
6. Anchor the adhesive side of the ALLEVYN ADHESIVE dressing to the skin.
7. Smooth the ALLEVYN ADHESIVE over the wound, removing the remaining backing paper.
8. Ensure the ALLEVYN ADHESIVE dressing is flat to the wound, free from creasing and has adhered all around the wound.
9. If the dressing requires repositioning, remove carefully according to removal instructions and repeat application as per application instructions.
When should I replace ALLEVYN ADHESIVE?
Fluid absorbed by the dressing will appear as a darker patch at the surface of the dressing. Inspect the dressing frequently to monitor the size of the darker patch.
Dressings can be left in place for up to 7 days depending on the condition of the wound and the surrounding skin or until wound fluid (darker patch) is visible and approaches within 0.5cm of the edge of the dressing pad, which ever is sooner.
How should I remove ALLEVYN ADHESIVE?
To remove the ALLEVYN ADHESIVE, left one corner of the dressing and slowly peel back until completely removed from the wound.
Always read the label and follow directions for use.
Storage Instructions
No
