ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.
HARD SURFACE SPRAY DISINFECTANT ONLY. NOT TO BE USED ON SKIN. IRRITATING TO EYES. DO NOT SPRAY PRODUCT TOWARDS EYES. IF PRODUCT CONTACTS EYES, RINSE IMMEDIATELY WITH PLENTY OF WATER AND SEEK MEDICAL ATTENTION. ENSURE ADEQUATE VENTILATION IN CONFINED SPACES. DO NOT USE WITH OR IMMEDIATELY AFTER ANY OTHER CHEMICAL OR BLEACH. ALWAYS WEAR RUBBER GLOVES AND SPRAY AWAY FROM YOUR FACE. AFTER USE, RINSE THOROUGHLY WITH WATER.Description Ajax Professional Bathroom is a disinfectant cleaner that powers through tough soap scum and grime, while removing rust stains and germs. It's power foam trigger allows you to target the area with minimal fuss and the new upside down trigger helps target those hard to reach areas.
- Expert on soap scum and grime
- Household Grade Disinfectant Cleaner
- Proudly made in Australia
- Now with an upside down trigger for hard to reach places
- 100% Recycled Bottle
Ajax Professional Surface Spray is suitable for Showers, Baths, Basins, Ceramic Tiles, Glass, Plastic, Splashback Stainless Steel and Chrome.
Size: 500mL Trigger Surface Spray
Suitable For: Showers and baths, wash basins, toilets, shower cubicles made from ceramic tiles, glass or plastic, splash backs, glazed tiles, stainless steel, chrome, ceramic floor & wall tiles.
Size: 500mL
Warnings Corrosive Liquid, Inorganic, N.O.S. (Contains Phosphoric Acid)
Keep out of reach of children. Do not spray towards the eyes. Ensure adequate ventilation in confined spaces. Do not use with or immediately after any other chemical or bleach.
First Aid Information
If swallowed, seek medical attention immediately and show this container or label.
If product contacts the eyes, rinse immediately with plenty of water and seek medical attention.
Ingredients Refer to www.colgatepalmolive.com.au for full information.
Lactic Acid 3.0% w/w, Phosphoric Acid 3.0% w/w
Contains: Phosphoric Acid
Direction To clean: For nonporous surfaces spray onto surface then wipe clean with a damp sponge. For stubborn stains, leave on for up to 10 minutes, then wipe clean with a damp sponge. For porous surfaces, like grout, rinse with water before application, then rinse well within 2 minutes of applying/application.
To disinfect on nonporous surfaces: Simply spray area until thoroughly wet. Let stand for 10 minutes, and then wipe clean with a damp sponge.
Always refer to surface manufacturer's instructions for care.
Where to use: Always test on an inconspicuous area before use.
Storage Instructions
Store below 30°C away from direct sunlight.
Storage Temperature: Below 30°C.
