ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Description Stay confidently protected with Bondi Sands SPF 50+ Fragrance Free Tinted Face Fluid. Combining broad spectrum UVA & UVB protection with instant skin hydration and a subtle tint, SPF 50+ Fragrance Free Face Tinted Fluid is an ultra-lightweight fluid providing up to 72 hours of hydration, perfect for wear under makeup or alone for daily protection.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 10% W/W, OCTOCRYLENE 6% W/W, BUTYL METHOXYDIBENZOYLMETHANE 5% W/W, METHYLENE BIS-BENZOTRIAZOLYL TETRAMETHYLBUTYLPHENOL 3% W/W, BEMOTRIZINOL 2% W/W, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE 2% W/W. PRESERVATIVES: PHENOXYETHANOL, CAPRYLYL GLYCOL, 1,2-HEXANEDIOL.Active Ingredients: ACTIVE INGREDIENTS: HOMOSALATE 10% W/W, OCTOCRYLENE 6% W/W, BUTYL METHOXYDIBENZOYLMETHANE 5% W/W, METHYLENE BIS-BENZOTRIAZOLYL TETRAMETHYLBUTYLPHENOL 3% W/W, BEMOTRIZINOL 2% W/W, DIETHYLAMINO HYDROXYBENZOYL HEXYL BENZOATE 2% W/W. PRESERVATIVES: PHENOXYETHANOL, CAPRYLYL GLYCOL, 1,2-HEXANEDIOL. Direction Step 1 Shake well before use.
Step 2 Apply liberally and evenly to all unprotected areas 15 to 20 minutes before exposure to the sun.
Step 3 Re-apply every 2 hours or more frequently when sweating, and after swimming, exercise or towel drying.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Ingredients ACTIVE INGREDIENTS: 4-METHYLBENZYLIDENE CAMPHOR 40MG/G, ETHYLHEXYL TRIAZONE 30MG/G, BUTYL METHOXYDIBENZOYLMETHANE 40MG/G, OCTOCRYLENE 40MG/G
CONTAINS: CAPRYLYL GLYCOL, OCTANOHYDROXAMIC ACIDDirection Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas
15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more frequently when
sweating, and after swimming, exercise or towel drying.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 8.00% W/W, OCTOCRYLENE 6.00% W/W, BUTYL
METHOXYDIBENZOYLMETHANE 5.00% W/W, ETHYLHEXYL TRIAZONE 4.00% W/W, METHYLENE
BIS-BENZOTRIAZOLYL TETRAMETHYLBUTYLPHENOL 2.00% W/W, BEMOTRIZINOL 1.00% W/W.
PRESERVATIVES: PHENOXYETHANOL, CAPRYLYL GLYCOL, 1,2-HEXANEDIOL.Direction Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas 15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more frequently when sweating, and after swimming, exercise or towel drying.
Ingredients AQUA (WATER), DIHYDROXYACETONE, PROPYLENE GLYCOL, TRIDECETH-9, ALOE BARBADENSIS LEAF JUICE, POLYSORBATE 20, ETHOXYDIGLYCOL, PEG-5 ETHYLHEXANOATE, GLYCERIN, BUTYLENE GLYCOL, PHENOXYETHANOL, PARFUM (FRAGRANCE), SODIUM METABISULFITE, ERYTHRULOSE, HYDROLYZED JOJOBA ESTERS, PEG-12 DIMETHICONE, CI 14700 (FD&C RED NO. 4), CI 19140 (FD&C YELLOW NO. 5), TOCOPHERYL ACETATE, DISODIUM EDTA, BENZYL ALCOHOL, PANTHENOL, CI 42090 (FD&C BLUE NO. 1).Direction Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump foam applicator firmly and apply Bondi Sands Self Tanning Foam liberally to a tanning mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on tanning mitt for face, elbows and knees.
Step 3 Leave foam on skin for at least 6 hours. Shower with warm water and gently pat skin dry. For the darkest longest lasting tan re-apply Bondi Sands Ultra Dark Self Tanning Foam 30 minutes after initial application.
Ingredients AQUA (WATER), DIHYDROXYACETONE, PROPYLENE GLYCOL, TRIDECETH-9, ALOE BARBADENSIS LEAF JUICE, POLYSORBATE 20, PEG-5 ETHYLHEXANOATE, GLYCERIN, ETHOXYDIGLYCOL, BUTYLENE GLYCOL, PHENOXYETHANOL, PARFUM (FRAGRANCE), PEG-12 DIMETHICONE, CI 14700 (FD&C RED NO. 4), CI 19140 (FD&C YELLOW NO. 5), TOCOPHERYL ACETATE, DISODIUM EDTA, BENZYL ALCOHOL, PANTHENOL, CI 42090 (FD&C BLUE NO. 1).Direction Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump foam applicator firmly and apply Bondi Sands Self Tanning Foam liberally to a tanning mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on tanning mitt for face, elbows and knees.
Step 3 Skin may be washed after one hour. For a longer lasting darker tan leave foam on skin for up to 6 hours. Shower with warm water and gently pat skin dry. Fot the deepest tan re-apply Bondi Sands Self Tanning Foam 30 minutes after initial application.
Ingredients Menthol 25mg/gDirection Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump foam applicator firmly and apply Bondi Sands Self Tanning Foam liberally to a tanning mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on tanning mitt for face, elbows and knees.
Step 3 Skin may be washed after one hour. For a longer lasting darker tan leave foam on skin for up to 6 hours. Shower with warm water and gently pat skin dry. FoR the deepest tan re-apply Bondi Sands Self Tanning Foam 30 minutes after initial application.
Description COLOURLOCK ACCELERATOR™ This market leading formula creates a thin, protective barrier that works at lightning speed to lock in your tan and prevent colour transfer so you can be same day ready."Ingredients AQUA (WATER), DIHYDROXYACETONE, GLYCERIN, DIPROPYLENE GLYCOL, COCO-GLUCOSIDE, COCONUT OIL GLYCERETH-8 ESTERS, CI 14700 (RED 4), SODIUM BENZOATE, CI 19140 (YELLOW 5), CITRIC ACID, ERYTHRULOSE, POTASSIUM SORBATE, SODIUM METABISULFITE, CI 42090 (BLUE 1).Direction "STEP 1: Ensure skin is clean, exfoliated and moisturiser-free.
STEP 2: Pump foam liberally onto a Bondi Sands Application Mitt. Apply to legs, arms and body with long, sweeping motions. Use what’s left on your mitt for hands, elbows, knees and feet.
STEP 3: Allow one hour for the tan to fully develop on your skin.
Shower with warm water (no soap!) and gently pat dry."
Description Customise the depth of your tan with our Self Tan Drops for Face and Body, inspired by the iconic Aussie tan and our much-loved tanning formulas. Enriched with a unique combination of antioxidant Australian fruits, our Drops can be mixed in with your favourite moisturiser or body lotion to help nourish, smooth and moisturise skin for long lasting radianIngredients AQUA (WATER), DIHYDROXYACETONE, ALCOHOL, GLYCERIN, PHENOXYETHANOL, XANTHAN GUM, BENZYL ALCOHOL, CARRAGEENAN, SODIUM METABISULFITE, ERYTHRULOSE, CITRIC ACID, SODIUM CITRATE, SYZYGIUM LUEHMANNII FRUIT EXTRACT, ACRONYCHIA ACIDULA FRUIT EXTRACT, DAVIDSONIA PRURIENS FRUIT EXTRACT.Direction Step 1 Ensure face and body is clean, dry and free from any product.
Step 2 Add 4-12 Self Tan Drops to your face or body moisturiser, mix well and apply evenly over face or body. When applying to your face, avoid eyes. Increasing the number of drops will result in a deeper tan.
Step 3 Wash hands thoroughly after use. Do not apply any other skincare products until colour has developed. For best results, leave on skin for at least six hours. Re-apply as desired.
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients AQUA/WATER/EAU (WATER), DIHYDROXYACETONE (TANNING), ALCOHOL (SOLVENT), GLYCERIN (SKIN CONDITIONING), SODIUM HYALURONATE (HYALURONIC ACID/HUMECTANT), SODIUM ASCORBYL PHOSPHATE (VITAMIN C/ANTIOXIDANT), TOCOPHEROL (VITAMIN E/ANTIOXIDANT), GLYCINE SOJA (SOYBEAN) OIL (SKIN CONDITIONING), DIMETHYL ISOSORBIDE (VISCOSITY CONTROLLING), XANTHAN GUM (BINDING), SODIUM METABISULFITE (ANTIOXIDANT), CITRIC ACID (BUFFERING/PH BALANCING), SODIUM CITRATE (BUFFERING/PH BALANCING), PHENOXYETHANOL (PRESERVATIVE), BENZYL ALCOHOL (PRESERVATIVE).Direction Step 1 Ensure face is clean, dry and free from any product.
Step 2 Add 4 -12 Pure Self Tanning Drops to your moisturiser, mix well and apply evenly over face and neck, avoiding eyes. Increasing the number of drops will result in a deeper tan.
Step 3 Wash hands thoroughly after use. Do not apply any other skincare products until colour has developed. For best results, leave on skin for at least six hours. Re-apply as desired.
Ingredients AQUA/WATER/EAU (WATER), DIHYDROXYACETONE (TANNING), PROPYLENE GLYCOL (SKIN CONDITIONING), TRIDECETH-9 (SURFACTANT), POLYSORBATE 20 (SURFACTANT), PEG-5 ETHYLHEXANOATE (SURFACTANT), GLYCERIN (SKIN CONDITIONING), PHENOXYETHANOL (PRESERVATIVE), BUTYLENE GLYCOL (SKIN CONDITIONING), DIMETHYL ISOSORBIDE (VISCOSITY CONTROLLING), SODIUM HYALURONATE (HYALURONIC ACID/HUMECTANT), ASCORBIC ACID (VITAMIN C/ANTIOXIDANT), TOCOPHERYL ACETATE (VITAMIN E/ANTIOXIDANT), ALOE BARBADENSIS EXTRACT (ALOE VERA/SKIN CONDITIONING), PEG-12 DIMETHICONE (SKIN CONDITIONING), ERYTHRULOSE (TANNING), PEG-12 (HUMECTANT), PEG-12 ALLYL ETHER (BINDING), DISODIUM EDTA (VISCOSITY CONTROLLING), POTASSIUM SORBATE (PRESERVATIVE), SODIUM BENZOATE (PRESERVATIVE), BENZYL ALCOHOL (PRESERVATIVE).Direction Discover the new way to tan. For best results, do not shake product prior to use. Empty space in the bottle is required to create the foam.
Step 1 For an even, streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Squeeze Bondi Sands Pure Self Tan Foaming Water directly onto skin. Use your Bondi Sands Application Mitt in long sweeping motions to blend into legs, arms and body. Use remaining residue on mitt for elbows and knees.
Step 3 Wait until touch dry before dressing. Conveniently requires no wash off. For best results, leave foaming water on skin for at least six hours. For the deepest tan, re-apply 30 minutes after initial application. Wash hands thoroughly after use.
Ingredients AQUA/WATER/EAU (WATER), DIHYDROXYACETONE (TANNING), PROPYLENE GLYCOL (SKIN CONDITIONING), TRIDECETH-9 (SURFACTANT), POLYSORBATE 20 (SURFACTANT), PEG-5 ETHYLHEXANOATE (SURFACTANT), GLYCERIN (SKIN CONDITIONING), PHENOXYETHANOL (PRESERVATIVE), BUTYLENE GLYCOL (SKIN CONDITIONING), DIMETHYL ISOSORBIDE (VISCOSITY CONTROLLING), SODIUM HYALURONATE (HYALURONIC ACID/HUMECTANT), ASCORBIC ACID (VITAMIN C/ANTIOXIDANT), TOCOPHERYL ACETATE (VITAMIN E/ANTIOXIDANT), ALOE BARBADENSIS EXTRACT (ALOE VERA/SKIN CONDITIONING), PEG-12 DIMETHICONE (SKIN CONDITIONING), ERYTHRULOSE (TANNING), PEG-12 (HUMECTANT), PEG-12 ALLYL ETHER (BINDING), DISODIUM EDTA (VISCOSITY CONTROLLING), POTASSIUM SORBATE (PRESERVATIVE), SODIUM BENZOATE (PRESERVATIVE), BENZYL ALCOHOL (PRESERVATIVE).Direction Discover the new way to tan. For best results, do not shake product prior to use. Empty space in the bottle is required to create the foam.
Step 1 For an even, streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Squeeze Bondi Sands Pure Self Tan Foaming Water directly onto skin. Use your Bondi Sands Application Mitt in long sweeping motions to blend into legs, arms and body. Use remaining residue on mitt for elbows and knees.
Step 3 Wait until touch dry before dressing. Conveniently requires no wash off. For best results, leave foaming water on skin for at least six hours. For the deepest tan, re-apply 30 minutes after initial application. Wash hands thoroughly after use.
Ingredients AQUA/WATER/EAU (WATER), DIHYDROXYACETONE (TANNING), PROPYLENE GLYCOL (SKIN CONDITIONING), POLYSORBATE 20 (SURFACTANT), PENTYLENE GLYCOL (SKIN CONDITIONING), GLYCERIN (SKIN CONDITIONING), DIMETHYL ISOSORBIDE (VISCOSITY CONTROLLING), COCO-GLUCOSIDE (SURFACTANT), GLYCERYL OLEATE (SKIN CONDITIONING), PHENOXYETHANOL (PRESERVATIVE), BUTYLENE GLYCOL (SKIN CONDITIONING), SODIUM HYALURONATE (HYALURONIC ACID/HUMECTANT), ASCORBIC ACID (VITAMIN C/ANTIOXIDANT), TOCOPHERYL ACETATE (VITAMIN E/ANTIOXIDANT), ALOE BARBADENSIS LEAF JUICE (ALOE VERA/SKIN CONDITIONING), SODIUM METABISULFITE (ANTIOXIDANT), PEG-12 DIMETHICONE (SKIN CONDITIONING), ERYTHRULOSE (TANNING), PEG-12 (HUMECTANT), PEG-12 ALLYL ETHER (BINDING), DISODIUM EDTA (VISCOSITY CONTROLLING), CI 14700 (FD&C RED NO. 4) (COLOURANT), CI 19140 (FD&C YELLOW NO. 5) (COLOURANT), CI 42090 (FD&C BLUE NO. 1) (COLOURANT), BENZYL ALCOHOL (PRESERVATIVE), POTASSIUM SORBATE (PRESERVATIVE), SODIUM BENZOATE (PRESERVATIVE).Direction Step 1 For an even, streak free tan, ensure your skin is exfoliated and free of any moisturisers
Step 2 Squeeze Bondi Sands Pure Ultra Dark Self Tan Foaming Water directly onto skin. Use your Bondi Sands Application Mitt in long sweeping motions to blend into legs, arms and body. Use remaining residue on mitt for elbows and knees.
Step 3 For best results, leave foaming water on skin for at least six hours before rinsing off. For the darkest tan, reapply 30 minutes after initial application. Wash hands thoroughly after use.
Ingredients AQUA (WATER/EAU), DIHYDROXYACETONE, PROPYLENE GLYCOL, TRIDECETH-9, ALOE BARBADENSIS LEAF JUICE, POLYSORBATE 20, PEG-5 ETHYLHEXANOATE, GLYCERIN, ETHOXYDIGLYCOL, BUTYLENE GLYCOL, PHENOXYETHANOL, PARFUM (FRAGRANCE), PEG-12 DIMETHICONE, CI 14700 (FD&C RED NO. 4), CI 19140 (FD&C YELLOW NO. 5), TOCOPHERYL ACETATE, DISODIUM EDTA, BENZYL ALCOHOL, PANTHENOL, CI 42090 (FD&C BLUE NO. 1).Direction Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump foam applicator firmly and apply Bondi Sands Self Tanning Foam liberally to a tanning mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on tanning mitt for face, elbows and knees.
Step 3 Skin may be washed after one hour. For a longer lasting darker tan leave foam on skin for up to 6 hours. Shower with warm water and gently pat skin dry. For the deepest tan re-apply Bondi Sands Self Tanning Foam 30 minutes after initial application.
Description Sand, sea and sun, the enviable Australian image. Experience a sun-kissed Australian tan every time with Bondi Sands Liquid Gold Self Tanning Foam. Enriched with Argan Oil and infused with the scent of coconut, this hydrating self-tanning foam will develop into a golden tan that is touch dry in secondsIngredients AQUA (WATER), DIHYDROXYACETONE, PROPYLENE GLYCOL, ALCOHOL, POLYSORBATE 20, DIMETHYL ISOSORBIDE, OLETH-20, PENTYLENE GLYCOL, ERYTHRULOSE, SODIUM METABISULFITE, PEG-7 GLYCERYL COCOATE, PARFUM (FRAGRANCE), PHENOXYETHANOL, 1,2-HEXANEDIOL, CAPRYLYL GLYCOL, CI 14700 (FD&C RED NO. 4), CI 19140 (FD&C YELLOW NO. 5), HYDROLYZED JOJOBA ESTERS, ARGANIA SPINOSA KERNEL OIL, COCOS NUCIFERA (COCONUT) OIL, TOCOPHERYL ACETATE, CI 42090 (FD&C BLUE NO. 1), COUMARIN.Direction Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump foam applicator firmly and apply Bondi Sands Self Tanning Foam liberally to a tanning mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on tanning mitt for face, elbows and knees.
Step 3 Wait until touch dry before dressing. Conveniently requires no wash off. Leave foam on skin for at least 6 hours.
Due to high demand , this products ran out of stock , please re-check in 24H
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Description Enjoy a sun-soaked day the Bondi Sands way with our Hydra UV Protect SPF 50+ Face Lotion. Providing UVA & UVB protection, our formula is infused with ethically sourced algae for deep hydration, whilst offering an invisible, non-greasy finish. Can be worn alone or under makeup.Dermatologically tested. Suitable for sensitive skin. Non-comedogenic (won't clog pores).Reef friendly. Fragrance free. Paraben free. Sulphate free.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 10% W/W, OCTOCRYLENE 8% W/W, OCTYL SALICYLATE 5% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3% W/W PRESERVATIVES: PHENOXYETHANOL, BENZYL ALCOHOL, HYDROXYACETOPHENONEDirection Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas 15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more often when sweating and after swimming, exercise or towel drying.
Due to high demand , this products ran out of stock , please re-check in 24H
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Description Providing UVA & UVB protection, our four hour water resistant formula is infused with ethically sourced algae for deep hydration, whilst offering an invisible, non-greasy finish.Broad Spectrum UVA & UVB Protection. Water Resistant. Plant Based Hydration.Ingredients 4-METHYLBENZYLIDENE CAMPHOR 40MG/G, BUTYL METHOXYDIBENZOYLMETHANE 40MG/G, OCTOCRYLENE 40MG/G, ETHYLHEXYL TRIAZONE 30MG/G PRESERVATIVES: CAPRYLYL GLYCOL, OCTANOHYDROXAMIC ACID, GLYCEROL, PHENOXYETHANOLDirection Step 1.
Shake well before use.
Step 2.
Apply liberally and evenly to all unprotected areas 20 minutes before exposure to the sun. You need at least one teaspoon per limb, one for the front of the body, one for the back and one for the head.
Step 3.
Re-apply every 2 hours or more often when sweating and after swimming, exercise or towel drying. Use alongside a hat, protective clothing and sunglasses.
Ingredients C12-15 ALKYL BENZOATE, OCTYLDODECANOL, CAPRYLIC/CAPRIC TRIGLYCERIDE, ETHYLCELLULOSE, MICA, CI 77491 (IRON OXIDES), CI 77499 (IRON OXIDES), TOCOPHERYL ACETATE, BHT, PARFUM (FRAGRANCE), BENZYL SALICYLATE, HYDROXYCITRONELLAL, ALPHA-ISOMETHYL IONONE.Direction Step 1: Shake well. Apply small amount of Bondi Sands GLO Finishing Gloss directly onto the skin.
Step 2: Spread evenly with Bondi Sands Body Brush or Application Mitt. Reapply as required.
Step 3: Wash hands after application. Remove from skin using a cloth with warm water and soap.
Ingredients AQUA (WATER), CYCLOPENTASILOXANE, CYCLOHEXASILOXANE, CI 77891 (TITANIUM DIOXIDE), CI 77492 (IRON OXIDES), PEG/PPG-19/19 DIMETHICONE, PROPYLENE GLYCOL, CI 77499 (IRON OXIDES), PHENOXYETHANOL, CI 77491 (IRON OXIDES), DISTEARDIMONIUM HECTORITE, SILICA, POTASSIUM SORBATE, SORBITAN ISOSTEARATE, TOCOPHERYL ACETATE, CUCUMIS SATIVUS (CUCUMBER) FRUIT WATER, TRIETHOXYCAPRYLYLSILANE, PARFUM (FRAGRANCE), ASCORBYL PALMITATE, SODIUM BENZOATE, GLUCONOLACTONE, BENZYL SALICYLATE, HYDROXYCITRONELLAL, ALPHA-ISOMETHYL IONONE.Direction Step 1: Shake well. Apply small amount of Bondi Sands GLO Matte One Day Tan directly onto the skin.
Step 2: Spread evenly with Bondi Sands Body Brush or Application Mitt. Reapply as required.
Step 3: Wash hands after application. Remove from skin using a cloth with warm water and soap.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Description Formulated to deliver up to 72 hours of hydration, with added aloe vera and vitamin E to leave your skin feeling deeply moisturised. Can be worn alone or under makeup. Paraben free. Sulphate free.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 10.00% W/W, OCTOCRYLENE 8.00% W/W, OCTYL SALICYLATE 5.00% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3.00% W/W. PRESERVATIVES: PHENOXYETHANOL, BENZYL ALCOHOL.Active Ingredients: ACTIVE INGREDIENTS: HOMOSALATE 10.00% W/W, OCTOCRYLENE 8.00% W/W, OCTYL SALICYLATE 5.00% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3.00% W/W. PRESERVATIVES: PHENOXYETHANOL, BENZYL ALCOHOL. Direction Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas 15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more often when sweating and after swimming, exercise or towel drying.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Description Providing UVA & UVB protection, this gentle, fast absorbing formula dries to an invisible finish. With Vitamin E, this formula leaves skin feeling nourished.Dermatologically tested. Suitable for sensitive skin. Non-comedogenic – won’t clog pores. Vegan & Cruelty FreeIngredients ACTIVE INGREDIENTS: HOMOSALATE 10.50% W/W, OCTOCRYLENE 4.20% W/W, OCTYL SALICYLATE 3.50% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3.50% W/W. PROPELLANT: HYDROCARBON. CONTAINS ETHANOL 34.8% V/V.Direction Step 1.
Shake can well before use. Make sure you are in a well-ventilated area to avoid inhalation. Do not apply the product in windy conditions.
Step 2.
Hold the can 10-15 cm away from the body. Spray liberally and evenly until the product looks and feels wet on the skin. Do not spray directly onto the face, instead spray onto hands and then apply to the face.
Step 3.
Re-apply every 2 hours or more often when sweating and after swimming, exercise or towel drying.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 10.00% W/W, OCTOCRYLENE 8.00% W/W, OCTYL SALICYLATE 5.00% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3.00% W/W. PRESERVATIVES: PHENOXYETHANOL, BENZYL ALCOHOL.Direction Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas 15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more often when sweating and after swimming, exercise or towel drying.
