Opti-Free

ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL. IF SYMPTOMS PERSIST, SEE YOUR HEALTH PROFESSIONAL.Description OPTI-FREE™ PureMoist™ Solution is intended for cleaning,disinfection, and storage of soft contact lenses (including siliconehydrogel lenses).Warnings WARNINGS: It is essential that you follow your eye care professional’s directions and all labelling instructions for proper use and care of your lenses and lens care products, including the lens case. Do not reuse or “top off” solution in the lens case since this may reduce efective lens disinfection. Eye problems, including an infection (serious microbial infection) or corneal ulcers, can develop rapidly and lead to loss of vision. If you experience persistent eye discomfort, burning, stinging, dry eye sensation, excessive tearing, redness of the eye (irritation, allergic response), or vision changes (decreased vision), IMMEDIATELY remove your lenses and consult your eye care professional as the problem could become more serious. Ingredients Contains: Sodium citrate, sodium chloride, boric acid, sorbitol, aminomethylpropanol, disodium EDTA, two wetting agents (TETRONIC™ 1304† and HydraGlyde™ Moisture Matrix [EOBO-41™ (polyoxyethylene-polyoxybutylene)], POLYQUAD™ (polyquaternium-1) 0.001% and ALDOX™ (myristamidopropyl dimethylamine) 0.0006% preservatives, and purified water.Direction General Directions: - Remove imprinted seal around bottleneck completely before use. - Always wash and rinse hands thoroughly and dry with a clean, lint free towel before handling your contact lenses. - Clean, recondition, rinse and disinfect your lenses each time you remove them. - Always handle the same lens, the right or the left, first in order to avoid mix-ups. - When using a new Alcon Contact Lens Case, rinse the case with OPTI-FREE™ PureMoist™ Solution before use to remove any debris.

Read more less

ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Opti-Free Replenish Multi-Purpose Disinfecting Solution (MPDS) is a proprietary formula that is specially designed to recondition your silicone hydrogel and other soft contact lenses so that your eyes feel fresh and moist throughout the lens wear day. Only Opti-Free Replenish MPDS contains Tearglyde proprietary dual action reconditioning system that is proven to recondition and retain moisture on the lens surface everyday.Long lasting reconditioning agents work to keep your lenses clean and comfortable. Opti-Free Replenish MPDS is proven to retain moisture on the surface of lenses throughout the lens wearing day - everyday.Promotes:• Lens cleanliness• Wettability• Lens surface moisture• Comfort• Clear visionReduces:• Protein build-up• Lens deposits• Discomfort• Appearance of rednessEnhanced disinfection formula (Aldox and Polyquad) that is compatible with silicone hydrogel and soft contact lenses. Proven to kill bacteria (germs) that can cause eye infections.For silicone hydrogel and soft contact lenses.Cleans. Reconditions. Rinses. Disinfects. Stores.Sterile A.__PRESENTSuitable For: Contact lens care solution kit to remove protein, cleans, rinses, disinfects, stores and/or rewets.Size: 300ml x 2 Warnings • Do not use this product if you are allergic to any of the ingredients. • It is essential that you follow your eye care professional’s directions and all labelling instructions for proper use and care of your lenses and lens care products, including the lens case. Do not reuse or “top off” solution in the lens case since this may reduce effective lens disinfection. Eye problems, including an infection (serious microbial infection) or corneal ulcers, can develop rapidly and lead to loss of vision. If you experience persistent eye discomfort, burning, stinging, dry eye sensation, excessive tearing, redness of the eye (irritation, allergic response), or vision changes (decreased vision), IMMEDIATELY remove your lenses and consult your eye care professional as the problem could become more serious. • Always use fresh OPTI-FREETM REPLENISHTM Solution.  Never reuse the solution in your lens storage case. • Always use the Alcon Contact Lens Case. • To help prevent eye infections, replace your lens case frequently. • TAMPER EVIDENT: Do not use if the security seal is damaged or missing prior to first opening. • Do not use if package or bottle (sterile packaging) or lens case is damaged. • Never use water, saline solution, or rewetting drops to disinfect your lenses. • Do not swallow. If swallowed, get medical help as abdominal discomfort (gastrointestinal discomfort) may occur. • To avoid contamination, never touch dropper tip of the container to any surface. • Close the flip-top cap after using. • Store between 15 °C to 30 °C. • Keep the container tightly closed when not in use. • This product contains a level of boric acid* that is safe when used according to label instructions. • Use before the expiration date marked on the product. • Once the bottle is opened, discard any remaining solution after six months. • Adult supervision required. Keep out of the reach of children. • Not for use with heat (thermal) disinfection. • Do not change lens care solutions without consulting your eye care professional. • If you experience persistent eye discomfort, burning, stinging, dry eye sensation, excessive tearing, redness of the eye (irritation, allergic response), or vision changes (decreased vision), immediately remove your lenses. Consult your eye care professional to identify the problem and seek treatment to avoid serious injury. An eye infection (serious microbial infection) may be present and if untreated, could lead to loss of vision (permanent decreased vision. Ingredients sodium citrate, sodium chloride, sodium borate, propylene glycol, TearGlydeTM proprietary dual action reconditioning system (TETRONICTM 1304, nonanoyl ethylenediaminetriacetic acid) with POLYQUADTM (polyquaternium-1) 0.001% and ALDOXTM (myristamidopropyl dimethylamine) 0.0005% preservatives, and purified water.Active Ingredients: Polyquaternium-1 (0.001%) Myristamidopropyl Dimethylamine (0.0005%) Direction • Remove imprinted seal around bottleneck completely before use. • Always wash and rinse hands thoroughly and dry with a clean, lint free towel before handling your contact lenses. • Clean, recondition, rinse and disinfect your lenses each time you remove them. • Always handle the same lens, the right or the left, first in order to avoid mix-ups. • When using a new Alcon Contact Lens Case, rinse the case with OPTI-FREETM REPLENISHTM Solution before use to remove any debris. • Thoroughly wet each side of the lens with OPTI-FREETM REPLENISHTM Solution. • Rub each side of the lens for 10 seconds (for a total rubbing time of 20 seconds). • Rinse each side of the lens for 10 seconds with a steady stream of OPTI-FREETM REPLENISHTM Solution (for a total rinsing time of 20 seconds). • Fill your Alcon Contact Lens Case with fresh OPTI-FREETM REPLENISHTM Solution. Store lenses in the closed lens case overnight or at least 6 hours.  After soaking, lenses are disinfected and ready to wear. • If any debris remains on contact lenses, rinse with OPTI-FREETM REPLENISHTM Solution prior to insertion.  You may leave your lenses in the unopened lens case containing OPTI-FREETM REPLENISHTM Solution for up to 30 days. After this time, your lenses must be cleaned and disinfected with OPTI-FREETM REPLENISHTM Solution prior to wear. • After use, always empty and clean the Alcon Contact Lens Case by rinsing with fresh OPTI-FREETM REPLENISHTM Solution. Do not wash the lens case with water. • Before allowing the lens case to air dry, be sure that no residual solution remains in the case. Contact lens care solution kit to remove protein, cleans, rinses, disinfects, stores and/or rewets.

Read more less

ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Opti-Free PureMoist Multi-Purpose Disinfecting Solution contains HydraGlyde Moisture Matrix that provides 16 hours of lens moisture keeping you comfortable for the entire day.Polyquad and Aldox preservatives enhanced disinfection formula has activity against bacteria, fungi and Acanthamoeba that can cause eye infections.For optimal lens moisture, hydration and cleaning, fill the lens case with fresh solution every time lenses are stored. Never reuse solution. This will help achieve maximum lens surface moisture for all day comfortable lens wear.- Provides 16 hours of moisture.- Removes lipid and protein daily for clear vision.- Effective yet gentle formula that kills germs. - Biocompatible Dual Disinfection.- Multi-purpose disinfecting solution.- Removes lipid and protein deposits daily.- Cleans, reconditions, rinses, disinfects, stores.Sterile A.HydraGlyde Moisture Matrix is a proprietary wetting agent that keeps lenses moist for 16 hours.How it works:1. In the lens case, HydraGlyde Moisture Matrix embeds itself on and within the lens surface to keep lenses moist and hydrated throughout the day.2. HydraGlyde Moisture Matrix provides a cushion of moisture for comfort from insertion to removal.  Suitable For: OPTI-FREE™ PureMoist lens care system is intended for use by consumers and eye care professionals for use in the daily cleaning, reconditioning, rinsing, removing protein deposits, reducing lipid deposition, chemical (not heat) disinfection, and storage of silicone hydrogel and soft (hydrophilic) contact lenses.Boxed Contents: 1 x 90mL, 1 x Lens caseSize: 90mL Warnings It is essential that you follow your eye care professional’s directions and all labeling instructions for proper use and care of your lenses and lens care products, including the lens case. Do not reuse or “top o ” solution in the lens case since this may reduce e ective lens disinfection. Eye problems, including an infection or corneal ulcers, can develop rapidly and lead to loss of vision. If you experience persistent eye discomfort, excessive tearing, vision changes, or redness of the eye, IMMEDIATELY remove your lenses and consult your eye care professional as the problem could become more serious. Ingredients Sodium Citrate, Sodium Chloride, Boric Acid, Aminomethylpropanol, Sorbitol, Disodium EDTA, Two wetting agents (Tetronic 1304 (Tetronic is a registered trademark of BASF.) and HydraGlyde Moisture Matrix [EOBO-41 - Polyoxyethylene - Polyoxybutylene]), with Polyquad (Polyquaternium-1) 0.001% and Aldox (Myristamidopropyl Dimethylamine) 0.0006% Preservatives (This patented formula is only supplied by Alcon.).Contains: Sodium citrate, sodium chloride, boric acid, sorbitol, aminomethylpropanol, disodium EDTA, two wetting agents (TETRONIC 1304 and HydraGlyde Moisture Matrix [EOBO-41 (polyoxthylene-poloxybutylene)], POLYQUAD (polyquarternium-1) 0.001% and ALDOX (myristamidopropyl dimethylamine) 0.0006% preservatives, and purified water. Active Ingredients: Sodium Citrate, Sodium Chloride, Boric Acid, Aminomethylpropanol, Sorbitol, Disodium EDTA, Two wetting agents (Tetronic 1304 (Tetronic is a registered trademark of BASF.) and HydraGlyde Moisture Matrix [EOBO-41 - Polyoxyethylene - Polyoxybutylene]), with Polyquad (Polyquaternium-1) 0.001% and Aldox (Myristamidopropyl Dimethylamine) 0.0006% Preservatives (This patented formula is only supplied by Alcon.). Direction Follow These Directions for Use: • Thoroughly wet each side of the lens with OPTI-FREE PureMoist Solution. • Rub each side of the lens for 10 seconds (for a total rubbing time of 20 seconds). • Rinse each side of the lens for 10 seconds with a steady stream of OPTI-FRE PureMois Solution (for a total rinsing time of 20 seconds). • Fill your Alcon Contact Lens Case with fresh OPTI-FREE PureMoist Solution. Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are disinfected and ready to wear. • If any debris remains on contact lenses, rinse with OPTI-FREE PureMois Solution prior to insertion. You may leave your lenses in the unopened lens case containing OPTI-FREE PureMoist Solution for up to 30 days. After this time, your lenses must be cleaned and disinfected with OPTI-FREE PureMoist Solution prior to wear.Storage Instructions Store below 30°C. Discard any remaining solution six months after opening. Storage Temperature: Below 30°C.

Read more less