Description May assist inEasing facial tension, headaches or migrainesRelieving fever and general discomfortBlood flow and circulationSoothing tired eyesFeaturesBlocks lightComfortableReusableSoothingOne size fits most360° Light Compression180° Rotatable gel areaConvenient Design - no hard, messy ice packs or scratchy strapsExpert-grade gel - Hot or cold useErgonomic design - Comfortable fit over the facial areaBlock-out material - Reduces light sensitivityIngredients Not ApplicableDirection How to HEAT MY® Gel Cap:
• Heat the gel cap _at in the microwave for 30 seconds
• Remove and carefully test temperature against your skin
• If it is not hot enough, reheat in 10 second increments
How to COOL MY® Gel Cap:
• Place gel cap in freezer for a minimum 2 hours for best results
• Touch test the temperature, freeze further if necessary
• If too cold, allow to thaw for a few minutes before use
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL. IF SYMPTOMS PERSIST, SEE YOUR HEALTH PROFESSIONAL.Ingredients Not ApplicableDirection How to use the HOT gel pack -
Make sure the gel pack is at room temperature before heating. Ensure the gel pack is not leaking before heating or application. Overheating may burst the gel pack.
Always carefully test the temperature of the gel pack before handling to avoid any risk of burns. How to use the COLD gel pack -
Insert the cooled gel pack into the sleeve. Wrap the sleeve around the affected area and secure with the adjustable strap and Velcro. wrapped too tightly and affecting your circulation. Repeat the process again if necessary, after 2 hours. Ensure that it’s not wrapped too tightly and affecting your circulation. Repeat the process again if necessary, after 2 hours.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL. IF SYMPTOMS PERSIST, SEE YOUR HEALTH PROFESSIONAL.Ingredients Not applicable.Direction How to use the HOT gel pack -
Make sure the gel pack is at room temperature before heating. Ensure the gel pack is not leaking before heating or application. Overheating may burst the gel pack.
Always carefully test the temperature of the gel pack before handling to avoid any risk of burns. How to use the COLD gel pack -
Insert the cooled gel pack into the sleeve. Wrap the sleeve around the affected area and secure with the adjustable strap and Velcro. wrapped too tightly and affecting your circulation. Repeat the process again if necessary, after 2 hours. Ensure that it’s not wrapped too tightly and affecting your circulation. Repeat the process again if necessary, after 2 hours.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Description FeaturesEasy-to-read two colour OLED display screenFour different display orientationsLow battery indicatorContains 2 x AAA batteries.36 months warrantyIngredients Not ApplicableActive Ingredients: Not Applicable Direction Warm your hands if they are cold or cool to the touch.
Find a comfortable position and rest for at least five minutes before taking a reading.
Place the oximeter on the fingertip of either your index (pointer) finger or your middle finger. It should feel snug but comfortable.
Keep still for at least a minute. If the numbers keep fluctuating, you may need to be still for longer. Once the numbers remain steady, you have your reading.
Record the two numbers you see. One is your oxygen saturation level, and the other is your heart rate. Each will be clearly labelled on the device.
Remove the device from your finger and store it in a safe place.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Description FeaturesUSB Type C Powered150 Memories for 2-usersEasy read three colour display screenLoose cuff indicatorLarge LCD displayAuto shut-off functionIncludes a universal-cuff (22-42cm)Zipper bag36 Month warrantyUse with MY Healthstyle APP (Syncs with Google Fit and Apple Health) to manually record your readingsWith a large digital display, it ensures clear visibility of systolic, diastolic, and pulse readings. Its one-touch operation, memory storage for multiple users, and adjustable cuff make it a convenient tool for tracking heart health. Helping users stay on top of potential health issues. Ideal for those looking for a reliable, everyday blood pressure monitoring solution.Ingredients Not ApplicableDirection 1. Install batteries as per instruction manual.
2. Insert cuff air plug into the lefthand side of monitor unit.
3. Remove thick clothing from the arm area, bare arm is recommended.
4. Rest for several minutes prior to testing. Sit down in a quiet place, preferably at a desk or table, with your arm resting on a firm surface and your feet flat on the floor.
5. Apply cuff to your left arm and keep level with your heart. 6. Bottom of cuff should be placed approximately1-2cm above elbow joint.
7. Press " START/STOP " Button to start testing.
Description This is a versatile device that offers a wide range of features to help you take fast, accurate temperature readings in any setting. With its 3-in-1 non-contact design, you can easily switch between forehead, object, and room temperature measurements with just a touch of a button.This thermometer provides you with accurate readings in just one second, making it an efficient option for use at home or healthcare settings. Its talking function can be turned on or off. When audio is "on", the thermometer will audibly read out your measurements for ease of use. The MY Infrared Forehead Thermometer - Reversible Probe also features a large, easy-to-read colour temperature screening backlight, which displays the temperature in green, orange, or red to help you quickly identify any fever. With its reversible probe that can rotate up to 270 degrees, you can easily take readings from any angle. This thermometer also comes with a dual-scale display that can be switched between Celsius and Fahrenheit. Its one-touch automatic operation, low battery indicator, and auto shut-off feature make it easy to use and reliable.With its 36-month warranty and included batteries, you can trust that this thermometer will be a valuable addition to your home or healthcare practice.Ingredients Not ApplicableDirection How to turn on/off the thermometer
Rotate the probe to any of the three positions below to turn on.
How to change between forehead mode and object mode:
Turn the thermometer on then hold the settings button down for 4-5 seconds to change the setting from Forehead mode(picture of a head) to Object mode (picture of a house)
or vice versa. If the voice function is on, you will hear a signal tone once the temperature mode has been changed. Release the setting button between each change of mode. Once the desired mode has been chosen, release the settings button. The device will always default to forehead mode each time of use. Note: Pressing the settings button briefly (<1 second) will turn the Voice Function either ON/OFF.
How to turn sound on/off:
Turn the device on and pressing the settings button briefly (<1 second) to turn the Voice Function either ON/OFF.
To measure forehead temperature:
1. Rotate the probe to the appropriate position, the device will turn on. Check if the(forehead) symbol is visible on the top left corner of the display.
If yes, aim the thermometer to the centre of the forehead with a distance less than 5cm to your forehead and then press the (thermometer symbol) button. Note: Wait 1-2 seconds before removing the thermometer from the forehead or alternatively remove once you hear the Voice Function reading out the temperature if the sound is set ON. It's recommended to wait an additional 1-2 seconds between testing for better accuracy.
2. Read the temperature on the display.
3. Rotate the probe to its original position to turn off.
To measure object temperature:
1. Rotate the probe to the appropriate position, the device will turn on. Check if the 1t symbol is visible on the top left corner of the display. If yes, aim the thermometer at the centre of the object you want to measure and then press the M button. Note: Wait 1-2 seconds before removing the thermometer from the object or alternatively remove once you hear the Voice Function reading out the temperature if the sound is set ON. It's recommended to wait an additional 7-2 seconds between testing for better accuracy.
2. Read the temperature on the display.
3. Rotate the probe to its original position to turn off.
After measurement:
Device will automatically shut off if left idle for more than 1 minute to extend battery Iife.
Note: It is recommended to clean the probe after each use to ensure an accurate reading and avoid cross contamination (see the section of Care and Cleaning for further details).
