ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE.Ingredients Not applicableDirection DIRECTIONS FOR USE Allow the test cassette, urine specimen, and/or controls to equilibrate to room temperature (15-30°C) prior to testing. 1 Remove the test cassette from the sealed pouch and use it as soon as possible. 2 Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 100µl) to the specimen well of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well. Refer to the illustration below. 3 Wait for the red line(s) to appear. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE. FOR PEOPLE WITH HIGH BLOOD PRESSURE. CONSULT YOUR DOCTOR TO EVALUATE THE READINGS. CHECK YOUR DEVICE PERIODICALLY FOR ACCURACY. OMRON BLOOD PRESSURE MONITORS CAN DETECT AN IRREGULAR HEARTBEAT (ARRHYTHMIA) WHICH CAN ASSIST WITH EARLY DIAGNOSIS. ONLY A DOCTOR CAN DIAGNOSE ARRHYTHMIA.Description The Omron HEM7142T1 Standard (Medium Cuff) Blood Pressure Monitor comes with Bluetooth connectivity. Simple, one-touch operation, irregular heartbeat detection and a cuff wrapping guide to indicate when the cuff is correctly wrapped on the upper-arm, great for first-time users with an upper arm circumference of 22-32cm.Boxed Contents: 1 X BP MONITOR, 1 X MEDIUM ARM CUFF, 4 X AA, 1 X INSTRUCTION MANUAL, 1 X OMRON CONNECT SETUP INSTRUCTIONSWarnings Always read the label and follow the directions for use. For people with high blood pressure. Consult your doctor to evaluate the readings. Check your device periodically for accuracy. OMRON Blood Pressure Monitors can detect an irregular heartbeat (arrhythmia) which can assist with early diagnosis. Only a doctor can diagnose arrhythmia. Ingredients N/ADirection Please read the full Instructions for Use provided with the product prior to using.
•Avoid bathing, drinking alcohol/caffeine, smoking, exercising and eating for 30 minutes before taking a measurement
•Rest for at least 5 minutes before taking the measurement
•If using the Bluetooth® function you will need to SYNC the device to your smartphone
•Sit upright on a chair with your legs uncrossed and feet flat on the floor, with your back and arm being supported
•Remove tight-fitting clothing from your arm. Do not roll up a tight sleeve. Do not place the arm cuff over thick clothes
•Wrap the arm cuff firmly in place around the left upper arm. Please see instruction manual if needing to use the right arm.
•Positioning the monitor with the START/STOP button towards the body makes it easier to use the device
•The bottom edge of the arm cuff should be 1 to 2 cm above your elbow
•Rest your arm on a table so that the arm cuff is at the same level as your heart
•Ensure solid connection of the air plug and cuff to main unit
•Ensure you remain still and do not talk during the measurement
•Press the START/STOP button
•The cuff will inflate and a result will display on the screen (approx. 30-60 secs)
•The reading will be automatically saved in the memoryRead the Important Safety Information in this instruction manual before
using this monitor. Follow this instruction manual thoroughly for your
safety.
Keep for future reference. For specific information about your own blood
pressure, CONSULT WITH YOUR PHYSICIAN.Storage Instructions Storage
Keep your monitor and other components in the storage case when not in use.
Store your monitor and other components in a clean, safe location.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE.Ingredients Not applicableDirection Allow the test cassette, urine specimen, and/or controls to equilibrate to room temperature (15-30°C) prior to testing. 1 Remove the test cassette from the sealed pouch and use it as soon as possible. 2 Place the test cassette on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 100µl) to the specimen well of the test cassette, and then start the timer. Avoid trapping air bubbles in the specimen well. Refer to the illustration below. 3 Wait for the red line(s) to appear. The result should be read at 5 minutes. Do not interpret the result after 10 minutes.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE. FOR PEOPLE WITH HIGH BLOOD PRESSURE. CONSULT YOUR DOCTOR TO EVALUATE THE READINGS. CHECK YOUR DEVICE PERIODICALLY FOR ACCURACY.Description Product Features:• Bluetooth® Connectivity: iPhone/Android OMRON connect App Compatible• 360° IntelliWrap™ Cuff (Medium to Large - 22 - 42cm) Regular cuffs may cause inaccurate results when positioned incorrectly, however with the 360° accuracy zone, the IntelliWrap™ Cuff ensures consistent and precise accuracy • Intellisense™ Technology Automatically applies the right amount of pressure for fast, accurate and more comfortable results • Average of Last 3 Readings Exclusive technology displays the average of the last 2 or 3 readings taken within a 10-minute span • Irregular Heartbeat Detection If an irregular heartbeat is detected, an indicator icon will appear alerting the user to consult with a medical professional• 60 Memory• Hypertension Indicator Notifies you when blood pressure is outside the normal range according to international guidelines • Cuff Wrapping Guide Guides you to wrap the cuff correctly by indicating ‘OK’ • Body Movement Detection Alerts you of any body movements that will affect the blood pressure readings • Monitor Pulse • Power Source 4 x AA Batteries • Storage Case • 5 Year Standard WarrantyBoxed Contents: BP Monitor, IntelliWrap cuff, storage case, Omron connect setup instructions, 4 x AA batteries, instruction manualWarnings Always read the label and follow the directions for use. For people with high blood pressure. Consult your doctor to evaluate the readings. Check your device periodically for accuracy. Ingredients N/ADirection Read the Important Safety Information in this instruction manual before
using this monitor. Follow this instruction manual thoroughly for your
safety.
Keep for future reference. For specific information about your own blood
pressure, CONSULT WITH YOUR PHYSICIAN.Storage Instructions Keep your monitor and other components in the storage case when not in
use.
Store your monitor and other components in a clean, safe location.
VITAMINS MAY ONLY BE OF ASSISTANCE IF YOUR DIETARY INTAKE IS INADEQUATE. THIS PRODUCT MAY NOT BE RIGHT FOR YOU. READ THE WARNINGS ON PACK BEFORE PURCHASE AND FOLLOW THE INSTRUCTIONS FOR USE.Description Raspberry flavour Glucohit glucose tablets, help rapidly raise blood glucose levels for those that need an instant hit of glucose. Caffeine free, lactose & gluten free. Each tablet contains 4g of carbohydrates.Ingredients Glucose Monohydrate, Magnesium Stearate, Citric Acid, Natural Raspberry FlavourDirection As required.
ALWAYS READ & FOLLOW THE INSTRUCTIONS FOR USE & HEALTH WARNINGS. IF SYMPTOMS PERSIST, TALK TO YOUR HEALTH PROFESSIONAL.Description • Instant, one second reading• Non-contact temperature measurement• 3 measurement modes (Forehead, surface and room temperature)• Easy to hold design• Backlight provides visibility in the dark• Last reading displayed on the same screen as the current reading for easy comparison• Easily switch between Fahrenheit and Celsius• Memory feature recalls the last 25 readings• Silent mode• 2 year warranty (extended to 4 years if registered online)Boxed Contents: Main unit, probe lens cap, instruction manual, 1 x CR2032 button batteryWarnings Please read all Safety Warnings provided with the product prior to using.
WARNING - KEEP BATTERIES OUT OF REACH OF CHILDREN
•Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the oesophagus
•If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advice
•Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if compartment is not secure
•Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous
•Tell others about the risk associated with button batteries and how to keep their children safe
•A high or prolonged fever requires medical attention, especially for young children. Please contact your doctor
•Conducting self-diagnosis based on the measurement results and/or treatment can be dangerous. Please follow the instructions of your doctor. Self-diagnosis may worsen the symptoms
•Do not use this unit for any other purpose that what it is intended for
•Keep out of reach of children. Contains small parts that may cause a choking hazard if swallowed
•Do not allow children to take their temperatures unattended. Children may injure themselves when attempting to take temperatures without supervision
•Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect operation of the unit
•Follow the battery instructions carefully Ingredients Not applicableDirection Please read the full Instructions for Use provided with the product prior to using.
•Allow thermometer to rest for at least 30 minutes at room temperature (10˚C – 40˚C)
•Test your temperature when you are well so you have a comparison when you are unwell
•Do not bathe, use a cold compress or exercise 30 minutes prior to the reading
•Remain in a stable environment for at least 5 minutes
•Your forehead must be clean and free of sweat, make up and scars, etc.
•Always make sure probe lens is clean. Wipe it lightly with a soft dry cloth or a cotton swab
•Make sure it is set to forehead measurement mode
•When taking the measurement, make sure the probe lens is 1 to 3cm away from the centre of the forehead
•When measuring the temperature of an infant, note that infant body temperature is generally higher than adult body temperature and easily affected by external factors. For example, body temperature tends to increase after nursing or crying. Therefore, it is recommended to take measurements when the infant is calm
•Keep still during the measurement
•Take three measurements, if they are different, select the highest temperature
•The reading will be stored automatically in the memory
•Holding the thermometer too long may cause a higher ambient temperature reading of the probe. This could make the body temperature measurement lower than usual
•Forehead and ear thermometer readings can be different due to one being an external reading and the other an internal reading.
•Do not store the thermometer in a cold roomStorage Instructions -20°C to 60°C, 10 to 95%RH, 200 to 1060 hPa
Description Features 1 Second measurement15 Probe covers includedEar & object temperatureStorage case includedFever alarm°C / °F switchableBacklightLow battery indicatorAuto shut-off10 Reading memoryBatteries Included5 Year WarrantyIngredients Not ApplicableDirection To measure ear temperature (refer to manual for full instruction including image reference):
1. To achieve accurate readings, make sure a new, clean probe cover is in place before each measurement. Place a new probe cover on the probe firmly; making sure the probe and the inner portion of the probe cover fit snugly.
2. Press the Power Button. The display is activated to show all segments. After self-checking a ear and probe apprear on the screen (refer to manual) with beeps, so you can start a new measurement. If error messages appear, it means the thermometer is not ready for measurement.
To measure object temperature (refer to manual for image reference):
1. First eject the probe cover.
2. Aim the thermometer at the centre of the object you want to measure with a distance of 1 to 2 cm.
3. Press the POWER BUTTON to turn on the thermometer, you can take the object temperature after hearing two beep sounds.
Remarks:
This mode shows the actual, unadjusted surface temperatures, which is different from the body temperature.
How to change the ear mode and object mode:
You can press and hold S BUTTON to switch the mode between ear mode and object
mode.
After measurement (refer to manual for image reference):
1. Power off: Device will automatically shut off if left idle for more than 1 minute to extend
battery life.
2. Clean the probe after each use to ensure an accurate reading and avoid cross
contamination (See the section of Care and Cleaning for details).
Temperature indicator :
In Ear mode (refer to manual for image reference):
1. If the temperature reading is below 37.8°C(100.0°F), a happy face will be displayed
next to the reading.
2. If the temperature reading is 37.8°C(100.0°F) or above, a bad face will be displayed
next to the reading.
BackLight:
The display will only be lighted GREEN for 3 seconds when the unit is ready for measurement
and a measurement is completed. The backlight design is to the benefit of reading in the
night .
ALWAYS READ & FOLLOW THE INSTRUCTIONS FOR USE & HEALTH WARNINGS. FOR PEOPLE WITH HIGH BLOOD PRESSURE. CONSULT YOUR DOCTOR TO EVALUATE THE READINGS. CHECK YOUR DEVICE PERIODICALLY FOR ACCURACY. A DIAGNOSIS OF AFIB CAN ONLY BE CONFIRMED BY ELECTROCARDIOGRAM (ECG). IF THE AFIB SYMBOL APPEARS, CONSULT YOUR DOCTOR.Description The Omron HEM7361T Advanced with AFIB Indicator Blood Pressure Monitor measures blood pressure and detects AFIB at the same time. This allows users to consult their doctor for early diagnosis and treatment, which may prevent stroke or heart failure. Designed with families in mind, the dual user function allows for the storage and transmission of measurement data of 2 separate users to their smartphones. Features:• AFIB Indicator Detects the possibility of Atrial Fibrillation (AFIB), so you can consult your doctor for early diagnosis and treatment, which may prevent stroke or heart failure• Bluetooth® Connectivity: iPhone/AndroidOMRON connect App Compatible. Export readings via the App.• 360° IntelliWrap™ Cuff (Medium to Large - 22 - 42cm)Regular cuffs may cause inaccurate results when positioned incorrectly, however with the 360° accuracy zone, the IntelliWrap™ Cuff ensures consistent and precise accuracy.• Dual UsersAllows you and a second user to share the same device• 2 Users x 100 Measurement Memory Each• Intellisense™ TechnologyAutomatically applies the right amount of pressure for fast,accurate and more comfortable results• Irregular Heartbeat IndicatorIf an irregular heartbeat is detected, an indicator icon willappear alerting the user to consult with a medical professional• Hypertension IndicatorNotifies you when blood pressure is outside the normal range according to international guidelines• Cuff Wrapping GuideIndicator confirms the cuff has been wrapped correctly on the user’s arm• Body Movement IndicatorAlerts user if any body movement has occurred during the blood pressure reading• Average of Last Three ReadingsExclusive technology displays the average of the last 2 or 3 readings taken within a 10 minute span• Monitor Pulse• Large LCD Display• Storage Case• Power Source4 x AA Alkaline Batteries• 6 Year Warranty 3 year standard + additional 3 years when registered onlineBoxed Contents: Monitor, IntelliWrapTM Cuff, storage case, 4 x AA batteries, instruction manual, Omron connect setup guideWarnings Please read all Safety Warnings provided with the product prior to using.
Always read & follow the instructions for use & health warnings. For people with high blood pressure, Consult your doctor to evaluate the readings. Check your device periodically for accuracy. A diagnosis of Afib can only be confirmed by Electrocardiogram (ECG). If the Afib symbol appears, consult your doctor. Ingredients N/AActive Ingredients: N/A Direction Please read the full Instructions for Use provided with the product prior to using.
•Avoid bathing, drinking alcohol/caffeine, smoking, exercising and eating for 30 minutes before taking a measurement
•Rest for at least 5 minutes before taking the measurement
•If using the Bluetooth® function you will need to SYNC the device to your smartphone
•Sit upright on a chair with your legs uncrossed and feet flat on the floor, with your back and arm being supported
•Remove tight-fitting clothing from your arm. Do not roll up a tight sleeve. Do not place the arm cuff over thick clothes
•Wrap the arm cuff firmly in place around the left upper arm. Please see instruction manual if needing to use the right arm.
•Positioning the monitor with the START/STOP button towards the body makes it easier to use the device
•The bottom edge of the arm cuff should be 1 to 2 cm above your elbow
•Rest your arm on a table so that the arm cuff is at the same level as your heart
•Ensure solid connection of the air plug and cuff to main unit
•Ensure you remain still and do not talk during the measurement
•Press the START/STOP button
•The cuff will inflate and a result will display on the screen (approx. 30-60 secs)
•The reading will be automatically saved in the memory
Description Pill Container features an O-ring to help seal out moisture.Keeps pills, vitamins or other small items securePerfect for traveling discreetly with medicationsAssorted colorsIngredients MetalDirection 1. Wash before initial use with warm, soapy water. Rinse and allow to dry completely before using.
2. Keep fob tightly cosed when not in use.
3. Inspect regularly for moisture or foreign particles that can enter when opened.
4. Replace pills and vitamins every two weeks or when tablet disintegration or moisture contamination has occurred.
ALWAYS READ & FOLLOW THE INSTRUCTIONS FOR USE & HEALTH WARNINGS. CONSULT YOUR HEALTH PROFESSIONAL TO EVALUATE THE READINGS.Description • Measures Oxygen Saturation (SpO2)• Measures Pulse Rate (PR)• Dual colour OLED display• Big font display• 6 display modes• Sound notification• Multi-directional display• Portable and convenient with carry bag• Low perfusion: 0.3%• 2 year warrantyBoxed Contents: Main unit, lanyard, carry pouch, instruction manual, 2 x AAA batteriesWarnings Please read all Safety Warnings provided with the product prior to using.
•Prolonged use or depending on the patient's condition may require changing the sensor site periodically. Change sensor site and check skin integrity, circulatory status and correct alignment at least every 2 hours
•SpO2 measurements may be adversely affected in the presence of high ambient light. Shield the sensor area if necessary
•The following will cause interference to the testing accuracy of the Pulse Oximeter:
-High-frequency electrosurgical equipment
-Placement of the sensor on an extremity with a blood pressure cuff, arterial catheter, or intravascular line
-Patients with hypotension, severe vasoconstriction, severe anaemia or hypothermia
-The patient is in cardiac arrest or is in shock
-Fingernail polish or false fingernails may cause inaccurate SpO2 readings
•Keep out of reach of children. Contains small parts that may cause a choking hazard if swallowed
•The device cannot be used in children less than 1 year old as the result may not be accurate
•Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect operation of the unit
•Do not use this monitor in areas containing high frequency (HF) surgical equipment, magnetic resonance imaging (MRI) equipment, computerized tomography (CT) scanners or in a flammable atmosphere
•Follow the battery instructions carefully Ingredients N/ADirection Please read the full Instructions for Use provided with the product prior to using.
•Press the power button for 2 seconds to turn the Pulse Oximeter on
•Open the clamp, then place one finger into rubber hole of the Pulse Oximeter (it is best to put the finger as far in as possible) with nail surface upward, then release the clamp to shut
•The data may take a few seconds to appear while a reading is obtainedAlways read the label and follow the directions for use.Storage Instructions • Remove the batteries from the battery slot and safely store them if you do not plan to use the Pulse Oximeter for a prolonged period of time.
• Place the Pulse Oximeter inside the Carry Bag.
• Store the Pulse Oximeter in a dry location free from dust and contamination and away from direct sunlight.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE.Ingredients Not ApplicableDirection Folding Walking stick, will fold into 4 pieces for easy storage. Rust proof anodised aluminium.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description These strips are clinically proven to instantly open your nasal passages so you can breathe easier. Breathe Right nasal strips are flexible spring-like bands that gently lift and open nasal passages to allow for better airflow.Suitable For: Adults and children 5 years & overSize: 30 Regular Strips Warnings For external use only. Do not use over sores, sunburned or irritated skin. Do not use for more than 12 hours per day. Disposable, use each strip only once Not for children under 5 years of age. CautionPackaging of this product contains natural rubber latex which may cause allergic reactions. If a rash or skin irritation occurs, discontinue use. Ingredients N/AContains: Packaging of this product contains natural rubber latex which may cause allergic reactions. Direction 1. CLEAN – wash and dry your nose to remove dirt and oils.
2. PLACE – remove the liner and place the strip on the nose
3. APPLY – press down ends and rub gently to secure.
Remove your Breathe Right nasal strip while washing your face with warm water or when in the shower. Always remove the strip slowly. Loosen the ends then gently lift the strip from both sides. Remove the strip properly with water to reduce the likelihood of skin reactions or injury.Adults and children 5 years & overStorage Instructions Store below 30⁰C.Store below 30⁰C. Do not use if carton seal is broken or open.
Description • This pill planner has clear lids for maximum visibility to help prevent missed doses• The compartment bottoms are contoured so that retrieving medication is easy• Each compartment can hold 12 aspirin sized tablets• Snap apart the planner to take one week on the go, or snap together multiple weeks to plan your doses out further in the futureIngredients Hard PlasticDirection 1. Wash before initial use with warm, soapy water. Rinse and allow to dry completely before using.
2. To open, gently push up tab on compartment lid.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients na - DeviceDirection Always read and follow the instructions for use.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE. IF SYMPTOMS PERSIST, TALK TO YOUR HEALTHCARE PROFESSIONAL.
FOR SINGLE PATIENT USE ONLY. REPLACE EVERY 12 MONTHS.Ingredients not applicableActive Ingredients: not applicable Direction Refer to the instructions for use leaflet for the Breath-A-Tech Anti-Static Spacer & Anti-Static Small Mask Combination Pack
NOT APPLICABLEDescription • Provides a clean cut every time with its stainless steel blade and v-shaped pill holder• Soft arms hold pill securely in place for cutting• Portable, convenient compact design• Product Dimensions 2.5" x 1.25" x 1"• Assorted colorsIngredients Plastic outer with metal bladeDirection 1. Wash before initial use with warm, soapy water. Rinse and allow to dry completely before using. Repeat as needed to remove pill residue.
2. Place pill in v-shaped holder.
3. Close cover to cut pill.
4. Remove cut halves of pill from dispensing tray.
5. Close cover and store in closed position.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description
10 second* reading time
Water-resistant
Readable in °C or °F
Fever alarm
Last reading memory function
Measurement completion alert
Automatic shut-off
Rigid tip
Oral, rectal or underarm use
*Rectal measurement. Result times may vary due to the individual and method used.Boxed Contents: 1 x Thermometer, 1 x Storage Case, 1 x LR41 Button Battery, 1 x Instruction ManualWarnings Please read all Safety Warnings provided with the product prior to using.
Always read & follow the instructions for use & health warnings. If symptoms persist, talk to your health professional.
WARNING - KEEP BUTTON BATTERIES OUT OF REACH OF CHILDREN
• Button batteries are hazardous (whether the battery is new or used).
• Swallowing or insertion of a button battery into any part of the body can cause serious injuries.
• If you suspect your child/a person has swallowed or inserted a button battery inside their body, medical attention should be sought immediately. You can also call the Poisons Information Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for 24/7 fast, expert advice.
• Dispose of used button batteries immediately and safely according to current local regulations.
• Tell others about the risk associated with button batteries and how to keep their children safe. Ingredients Not applicableDirection Please read the full Instructions for Use provided with the product prior to using.
1. To turn on, press the button next to the screen; a short beep will sound, indicating that the product is operational.
2. At the same time the product runs a selfcheck test, during which all the digital segments appear on the screen.
3. The memory will show the last reading on the screen for 2 seconds.
4. A default value of 37.0°C or 98.6°F will display for 2 seconds.
5. When the letters Lo and a “flashing” °C or °F display, the product is now rea
6. Refer to Methods of measuring temperature section for placement instructions.
7. Keep the user still during the measurement.
8. During the measurement, the °C or °F symbol “flashes” and a temperature will be
displayed that will continue to change until a constant temperature is reached.
9. As soon as the constant temperature value is reached (approx. 10 seconds)*, a beep
will sound 10 times and the °C or °F symbol will stop flashing.
10. Once the beeping has stopped the measurement is completed. Remove the product
from the measurement site.
11. The highest temperature measured appears on the screen.
12. Turn the product off by pressing the button.
13. Although the product will turn off automatically after 10 minutes, to conserve power it
is recommended to turn the product off manually after each reading.
14. The reading will automatically be stored in the memory.
15. The measurement continues even after the beeping has stopped. In order to achieve better body temperature measurement results, it is recommend to keep the probe in mouth and rectum for an additional 2 minutes, or in armpit about for an additional 5 minutes after the beeping sound.Please read the full Instructions for Use provided with the product prior to using.Storage Instructions -25 / 55
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description The strips are clinically proven to instantly open your nasal passages so you can breathe easier. Breathe Right nasal strips are flexible spring-like bands that gently lift and open nasal passages to allow for better airflow.Suitable For: Adults and children 5 years & overSize: 30 Large Strips Warnings Packaging of this product contains natural rubber latex which may cause allergic reactions. Ingredients N/AActive Ingredients: N/A Direction 1. CLEAN – wash and dry your nose to remove dirt and oils.
2. PLACE – remove the liner and place the strip on the nose
3. APPLY – press down ends and rub gently to secure.
Remove your Breathe Right nasal strip while washing your face with warm water or when in the shower. Always remove the strip slowly. Loosen the ends then gently lift the strip from both sides. Remove the strip properly with water to reduce the likelihood of skin reactions or injury.
Always read the label and follow the directions for use.Storage Instructions Store below 30⁰C. Do not use if carton seal is broken or open. Storage Temperature: Store below 30⁰C
PLEASE READ THE INSTRUCTION LEAFLET ENCLOSED IN THE PACK BEFORE USE. FOLLOW THE DIRECTIONS FOR USE.Description They are clinically proven to instantly open your nasal passages so you can breathe easier. Breathe Right nasal strips are flexible spring-like bands that gently lift and open nasal passages to allow for better airflow.Suitable For: Adults and children 5 years & overSize: 10 Regular Strips Warnings Packaging of this product contains natural rubber latex which may cause allergic reactions. Ingredients N/AContains: Packaging of this product contains natural rubber latex which may cause allergic reactions. Direction 1. CLEAN – wash and dry your nose to remove dirt and oils.
2. PLACE – remove the liner and place the strip on the nose
3. APPLY – press down ends and rub gently to secure.
Remove your Breathe Right nasal strip while washing your face with warm water or when in the shower. Always remove the strip slowly. Loosen the ends then gently lift the strip from both sides. Remove the strip properly with water to reduce the likelihood of skin reactions or injury.For external use only.Storage Instructions Store below 30⁰C. Do not use if carton seal is broken or open. Storage Temperature: Store below 30⁰C
ALWAYS READ & FOLLOW THE INSTRUCTIONS FOR USE & HEALTH WARNINGS. FOR PEOPLE WITH HIGH BLOOD PRESSURE. CONSULT YOUR DOCTOR TO EVALUATE THE READINGS. CHECK YOUR DEVICE PERIODICALLY FOR ACCURACY.Description •Easy to use one touch operation•Bluetooth® Connectivity OMRON connect App Compatible-For iPhone/Android. For a full list of supported smart devices visit: http://www.omronconnect.com/au/en_gb/devices/ prior to purchasing•2 Users x 100 Reading Memory EachUse the monitor for both yourself and another person with the 2 user memory function. Each user can store and review the last 100 readings with a touch of a button on the monitor. When using the OMRON connect App each user must use their own personal smart device to sync their individual readings.•Hypertension IndicatorsAlerts you if your blood pressure reading exceeds internationally recognised guidelines for normal home blood pressure levels. This includes a morning hypertension indicator•Cuff Wrapping GuideIndicator confirms the cuff has been wrapped correctly on the user’s wrist•Body Movement IndicatorAlerts user if any body movement has occurred during the blood pressure reading•Irregular Heartbeat IndicatorThis monitor can detect irregular heartbeats while blood pressure is being measured. If an irregular heartbeat is detected, an indicator icon will appear. If the symbol continues to appear, we recommend you consult with your healthcare professional.•Intellisense Technology™Automatically applies the right amount of pressure for fast, accurate and more comfortable measurements•Soft Flexible Wrist Cuff (Medium to Large) 13.5 – 21.5cm•Positioning IndicatorA built-in positioning sensor is used as an aid in determining if the monitor is at the correct height•Date & Time Display•Averaging FunctionsView the average readings of the latest 2 or 3 readings taken within a 10 minute span. Weekly averages for the measurement taken in the morning will also appear•LCD Display•Hard Storage Case•Power Source2 x AAA Alkaline Batteries includedBoxed Contents: Main unit with in-built wrist cuff, instruction manual, 2 x AAA batteriesWarnings Please read all Safety Warnings provided with the product prior to using.
•Consult your physician before using the device for any of the following conditions: common arrhythmias such as atrial or ventricular premature beats or atrial fibrillation, arterial sclerosis, poor perfusion, diabetes, pregnancy, pre-eclampsia, masectomy, renal disease or severe blood flow problems or blood disorders as cuff inflation can cause bruising
•Always consult your doctor. Self-diagnosis of measurement results and self-treatment are dangerous
•Do not adjust medication based on measurement results from this blood pressure monitor. Take medication as prescribed by your physician. Only a physician is qualified to diagnose and treat High / Low Blood Pressure
•The monitor is not intended to be a diagnostic device.
•Do not use the unit for any purpose other than measuring blood pressure
•Do not use the device on the injured arm or the arm under medical treatment
•Do not wrap the wrist cuff on the arm while being on an intravenous drip or blood transfusion
•Consult your physician before using the device on the arm with an arterio-venous (A-V) shunt
•Do not apply or inflate the wrist cuff around any body parts other than your wrist
•Do not take measurements more than necessary. It may cause bruising due to blood flow interference
•Remove the wrist cuff if it does not start deflating during the measurement
•The air tube or the AC adapter cable may cause accidental strangulation in infants
•Keep out of reach of children. Contains small parts that may cause a choking hazard if swallowed
•If there are any abnormalities during the measurement, remove the wrist cuff
•Do not use this device on infants, children or persons who cannot express themselves
•Do not inflate the wrist cuff more than necessary
•Stop using this monitor and consult your doctor if you experience skin irritation or discomfort
•Use only the approved wrist cuff for this unit. Use of other wrist cuffs may result in incorrect measurement results
•Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect operation of the unit
•Do not use the device with other medical electrical (ME) equipment simultaneously
•Do not use this monitor in areas containing high frequency (HF) surgical equipment, magnetic resonance imaging (MRI) equipment, computerized tomography (CT) scanners or in oxygen rich environments
•Follow the battery instructions carefully Ingredients Cuff- LATEX FREEDirection Please read the full Instructions for Use provided with the product prior to using.
•Avoid bathing, drinking alcohol/caffeine, smoking, exercising and eating for 30 minutes before taking a measurement
•Rest for at least 5 minutes before taking the measurement
•Sit upright on a chair with your legs uncrossed and feet flat on the floor, with your back and arm being supported
•Put your arm through the wrist cuff loop. Your palm should face upward.
•Wrap the wrist cuff around your wrist. Make sure the cuff does not cover the protruding part of the wrist bone (ulna) on the outside of the wrist
•Rest your arm on a table so that the wrist cuff is at the same level as your heart
•Ensure you remain still and do not talk during the measurement
•Press the START/STOP button
•The Positioning Indicator will alert you when your wrist is at the correct level (in line with your heart)
•The cuff will inflate and a result will display on the screen (approx. 30-60 secs)
•The reading will be automatically saved in the memoryStorage Instructions -20 °C to +60 °C / 10 % to 95 % RH / 700 to 1060 hPa
