ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Refresh Liquigel® is intended to hydrate and lubricate dry, irritated eyes caused by dry eye disease or environmental factors such as sun, wind and air conditioning. The gel-strength formula provides longer-lasting relief to help relieve persistent dry eyes. The advanced preservative, PURITE®, breaks down into components of natural tears when instilled in the eye.Suitable For: To hydrate and lubricate dry, irritated eyes caused by dry eye disease or environmental factors such as sun, wind and air conditioning.Boxed Contents: Multi-dose bottleSize: 15 mL Warnings CAUTION
Do not use:
- if allergic to any ingredients
- if solution changes colour or becomes cloudy
- if packaging shows evidence of tampering, is damaged, and/or cap seal is broken
- after the expiry date
Discontinue use of the product and consult a healthcare professional if you experience eye pain, changes in vision, continued redness or irritation of the eye, or if the condition worsens.
May cause transient blurring of vision which may impair the ability to drive or operate machines, wait until vision has cleared before driving or using machinery.
To avoid contamination or possible eye injury, do not touch bottle tip on any surface, and avoid direct contact with the eye. CautionFor external use only. If irritation persists or increases, discontinue use and consult your practitioner.
Replace cap tightly after use.
To avoid contamination, do not touch tip to any surface.
Keep out of reach of children. Ingredients Each mL contains: 10 mg Carmellose Sodium and 75 micrograms PURITE® (Preservative).Contains: Carmellose sodium, sodium chloride, boric acid, sodium borate decahydrate, potassium chloride, calcium chloride dihydrate, magnesium chloride hexahydrate, Purite® 75 microgram/mL (preservative), sodium hydroxide, hydrochloric acid, purified water. Active Ingredients: Carmellose Sodium Direction DIRECTIONS FOR USE
Always read the label before use. Instil 1 or 2 drops into each affected eye as needed or as directed. Replace cap tightly immediately after use.
Allow 5 minutes between administration of other eye products.Storage Instructions For external use only. Keep out of reach of children. Store below 25°C. Discard 90 days after first opening. Keep carton for future reference. Storage Temperature: Store below 25°C.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description The Opti-Soothe® Moist Heat Mask is designed to provide effective relief from dry eye and other related eye conditions. The mask features HydroBead® technology, which absorbs moisture from the air and once heat activated, releases a natural, consistent moist heat. Easy to use with 25 seconds in the microwave delivering 10 minutes of controlled moist heat. Soft and comfortable to wear, the Moist Heat Mask is also washable and reusable. Can also be used for cold therapy to help reduce symptoms of eye allergies, puffy eyes and contact lens irritation.Size: 1 Pack Warnings Keep out of reach of children. Ingredients Moist heat maskDirection Directions for use: Microwave the Opti-Soothe® Moist Heat Mask for 25 seconds in a 800W microwave or 15 seconds in a 900W+ microwave on full power. Always touch with fingers first to test the temperature before applying to closed eyes. If necessary allow the heat mask to cool for 1 minute and re-test. For additional heat, microwave for 5 seconds.
Opti-Soothe - can also be used for cold therapy to help reduce symptoms of eye allergies, puffy eyes, and contact lens irritation. Place mask in sealable plastic bag in the freezer for 30 minutes. Place over closed eyes for 5-7 minutes.
Step 1. Heat - 25 sec
Step 2. Check
Step 3. Apply
Do not exceed a maximum of 30 seconds of heating. The heat mask remains hot for 10 minutes; if reused within 30 minutes, reduce heating time by 10 seconds. For best results, apply the heat mask to closed eyes for 10 minutes per treatment or as recommended by your eye care specialist.Care: Wash immediately if exposed to food, oils, grease or other dirt. Hand wash only in cooled boiled water or bottled water with a mild detergent. Air dry for a minimum of 24 hours before next use.Storage Instructions Store at room temperature.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE.Ingredients Purified Water, 0.9% Sodium Chloride preseved with Polyhexamethylene Biguanide (PHMB) 0.0001%Direction Has 30 day shelf life after opening
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Celluvisc® lubricant eye drops are intended to relieve dry, tired, and/or strained eyes resulting from dry eye syndrome, or environmental factors such as pollution, screen use, and air conditioning.Suitable For: Intended to relieve dry, tired, and/or strained eyes resulting from dry eye syndrome, or environmental factors such as pollution, screen use, and air conditioning.Boxed Contents: Single-Use AmpoulesSize: 30 x 0.4 mL Warnings CAUTION
Do not use:
• if allergic to any ingredients
• if solution changes colour or becomes cloudy
• if packaging shows evidence of tampering, is damaged, and/or the ampoule is damaged
• after the expiry date
Discontinue use of the product and consult a healthcare professional if you experience eye pain, changes in vision, continued redness or irritation of the eye, or if the condition worsens.
May cause transient blurring of vision which may impair the ability to drive or operate machines, wait until vision has cleared before driving or using machinery.
To avoid contamination or possible eye injury, do not touch ampoule tip on any surface, and avoid direct contact with the eye. CautionTo avoid contamination, do not touch tip to any surface. If irritation persists or increases, discontinue use and consult your doctor.
For external use only.
Keep out of reach of children. Ingredients carmellose sodium 10 mg per 1 mLContains: Carmellose sodium, sodium chloride, sodium lactate, potassium chloride, calcium chloride dihydrate, sodium hydroxide, hydrochloric acid, purified water. Active Ingredients: carmellose sodium 10 mg per 1 mL Direction DIRECTIONS FOR USE
Always read the label before use. Make sure ampoule is intact before use.
Instil 1 or 2 drops in each affected eye(s) as needed.
Allow 15 minutes between administration of other eye products.
To open: COMPLETELY TWIST OFF TAB, then pull to remove.
This product can be used before inserting or after removing contact lenses.
This product is preservative free and should be used immediately after opening to avoid contamination which could result in eye infections. The single-use ampoules are not intended to be re-used and should be discarded immediately after initial use.Storage Instructions For external use only. Keep out of reach of children. Store below 25°C. Keep carton for future reference. Storage Temperature: Store below 25°C.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL.Ingredients A sterile, isotonic solution that contains HYDRANATE® (hydroxyalkylphosphonate), boric acid, edetate disodium, poloxamine, sodium borate and sodium chloride; preserved with DYMEDTM (polyaminopropyl biguanide) 0.0001%.Direction To clean, disinfect and remove protein daily, complete these simple steps.
This daily regimen is recommended by BAUSCH + LOMB for a healthy and comfortable contact lens wearing experience: Step 1 Place 3 drops of renu fresh multi-purpose solution on each side of the lens surface and gently rub for 20 seconds. Step 2 Thoroughly rinse each side of the lens for 5 seconds with renu fresh multi-purpose solution. Step 3 Place cleaned contact lens in the lens case and fill with fresh renu fresh multi-purpose solution. Soak at least 4 hours. Remember to always discard solution from lens case after each use.
ALWAYS READ THE LABEL AND ANY WARNINGS BEFORE PURCHASE. FOLLOW THE DIRECTIONS FOR USE. IF SYMPTOMS PERSIST, TALK TO YOUR HEALTH PROFESSIONAL.Description Are you putting up with irritated, tired, sore, watery, dry eyes?You may be suffering from dry eyes! Systane® range of lubricating eye drops are designed to moisturise and relieve the symptoms of dry eyes.Systane® COMPLETE is the all-in-one eye drop that replenishes all layers of the tear film. Systane® COMPLETE relieves irritated, tired, sore, watery, dry eyes for up to 8 hours^. Systane® COMPLETE uses unique technologyto moisturise, restore and stabilise the tear film:
HP-Guar to allow retention of moisture and relieve dry eye symptoms
Nano-sized lipid droplet technology to minimise blurring and provide surface coverage on your eyes
*IQVIA 01 TEARS S1K SELL-IN VALUE MAT 2021-02. ^Dry eye and associated symptoms due to aqueous deficient, evaporative and mixed dry eye.References: 1. Alcon Data on File, Study CDMGD0012401 (available on request). 2. TFOS DEWS II 2017. 3. Rangarajan et al. J Ocul Pharmacol Th. 2019; 35(1): 32-37 (Sponsored by Novartis) 4. Springs, C. Dev Ophthalmol. 2010;45:139-147Suitable For: Suitable for use by consumers for the temporary relief of dry eye symptoms.Size: 10mL Warnings It is essential that you follow your eye care professional’s directions and all labeling instructions for proper use of the product. If you experience persistent eye discomfort, excessive tearing, headache, vision changes, or redness of the eye, stop using SYSTANE™ COMPLETE and consult your eye care professional as the problem could become
more serious. Temporary blurred vision or other visual disturbances may affect the ability to drive or use machines. If blurred vision occurs after application, wait until the vision clears before driving or using machinery. Ingredients SYSTANE™ COMPLETE Lubricant Eye Drops is a
sterile emulsion containing propylene glycol, hydroxypropyl
guar, mineral oil, dimyristoyl phosphatidylglycerol, polyoxyl
40 stearate, sorbitan tristearate, boric acid, sorbitol, edetate
disodium, POLYQUAD™ (polyquaternium-1polidronium
chloride) 0.001% preservative, and purified water. It may
contain hydrochloric acid and/or sodium hydroxide to adjust
pH.Contains: SYSTANE™ COMPLETE Lubricant Eye Drops is a
sterile emulsion containing propylene glycol, hydroxypropyl
guar, mineral oil, dimyristoyl phosphatidylglycerol, polyoxyl
40 stearate, sorbitan tristearate, boric acid, sorbitol, edetate
disodium, POLYQUAD™ (polyquaternium-1polidronium
chloride) 0.001% preservative, and purified water. It may
contain hydrochloric acid and/or sodium hydroxide to adjust
pH. Active Ingredients: Propylene glycol Direction Shake well before using. SYSTANE™ COMPLETE Lubricant Eye Drops may be used as needed throughout the day to relieve the symptoms of dry eye. May be used to relieve dry eye symptoms associated with contact lens usage by instilling drops prior to inserting contact lenses and after the removal of contact lenses. Instill 1 or 2 drops in the aected eye(s) as needed and blink.See packaging insert for complete insturctions and important safety information.Storage Instructions Store between 2 to 30°C. Once the bottle is opened, discard any remaining emulsion after six months.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL. IF SYMPTOMS PERSIST, SEE YOUR HEALTH PROFESSIONAL.Ingredients Carbomer 2mg/g & excipients (e.g Sorbitol) Preservative: Cetrimide 0.1
mg/gDirection Instil one drop into eyes, 3 to 4 times daily as required. Always read the label and follow directions for use.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description REFRESH CONTACTS® formula contains a long-lasting lubricant that helps your eyes retain moisture, creating a cushion of comfort and protection.REFRESH CONTACTS® may be used with soft and rigid gas permeable (RGP) contact lenses. Can be used as often as needed.Indication:For the temporary relief of dryness and irritation associated with contact lens wear.Carmellose Sodium 5mg per 1mL.STERILE A.Suitable For: Relief from dryness and irritation associated with contact lens wear.Boxed Contents: Multi-dose bottleSize: 15 mL Warnings CAUTION
Do not use:
- if allergic to any ingredients
- if solution changes colour or becomes cloudy
- if packaging shows evidence of tampering, is damaged, and/or cap seal is broken
- after the expiry date
Discontinue use of the product and consult a healthcare professional if you experience eye pain, changes in vision, continued redness or irritation of the eye, or if the condition worsens.
May cause transient blurring of vision which may impair the ability to drive or operate machines, wait until vision has cleared before driving or using machinery.
To avoid contamination or possible eye injury, do not touch bottle tip on any surface, and avoid direct contact with the eye. CautionFor external use only. If irritation persists or increases, discontinue use and consult your practitioner.
Replace cap tightly after use. To avoid contamination, do not touch tip to any surface.
Keep out of reach of children. Ingredients Each mL contains: 5 mg Carmellose Sodium and 50 micrograms PURITE® (Preservative).Contains: Carmellose sodium, sodium chloride, boric acid, sodium borate decahydrate, potassium chloride, calcium chloride dihydrate, magnesium chloride hexahydrate, Purite® 50 microgram/mL (preservative), sodium hydroxide, hydrochloric acid, purified water. Active Ingredients: Carmellose sodium 5 mg/mL and PURITE® (preservative) 50 micrograms/mL. Direction DIRECTIONS FOR USE
Always read the label before use.
Replace cap tightly immediately after use. Allow 5 minutes between the administration of other eye products.
TO LUBRICATE AND REWET LENSES DURING THE DAY:
With the lenses on the eye, instil 1 or 2 drops into each eye as needed, or as directed by your eye care practitioner. Blink several times.
FOR EXTRA COMFORT:
Place 1 or 2 drops of Refresh Contacts® eye drops on each side of each lens before application.Storage Instructions For external use only. Keep out of reach of children. Store below 25°C. Discard 90 days after first opening. Keep carton for future reference. Storage Temperature: Store below 25°C.
Due to high demand , this products ran out of stock , please re-check in 24H
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. INCORRECT USE COULD BE HARMFUL. IF SYMPTOMS PERSIST, SEE YOUR HEALTH PROFESSIONAL.Warnings It is essential that you follow your eye care professional’s directions and all labeling instructions for proper use of the product. If you experience persistent eye discomfort, excessive tearing, vision changes, or redness of the eye, stop using IN A WINK™ Lubricant Eye Drops and consult your eye care professional as the problem could become more serious. CautionKeep out of reach and sight of children.
If you experience persistent discomfort or irritation, stop using the product and consult your eye care professional. Ingredients Hypromellose 3 mg/g, sodium perborate as preservative, sodium chloride, boric acid, potassium chloride, diethylenetriamine pentamethylene phosphonic acid, hydrochloric acid and water for injectionsContains: Hypromellose 3 mg/g, sodium perborate as preservative, sodium chloride, boric acid, potassium chloride, diethylenetriamine pentamethylene phosphonic acid, hydrochloric acid and water for injections. Direction DIRECTIONS FOR USE:
• Wash and dry your hands before use.
• Gently pull down the lower eyelid with
your index nger to form a pocket.
• Place one or two drops into the pocket
made by the lower eyelid (avoid touching
eye with dropper tip), and blink several
times.Do not use if you are sensitive to any of the ingredients.
Ophthalmic use only.
Use only if the bottle seal is intact before first use.
If already broken or damaged do not use product.
Discard any remaining product 12 weeks after opening.
Do not use after the expiry date.
Close the bottle after use.Storage Instructions Store between 8°C and 25°C Storage Temperature: Below 25°C.
Due to high demand , this products ran out of stock , please re-check in 24H
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Preservative free Ocular lubricant for night time use. Indication: Refresh Night Time lubricating Eye Ointment provides temporary relief for dry eyes.Suitable For: Sensitive eyes.Boxed Contents: 2 PackSize: 2 x 3.5g Warnings CautionNote: For external use only. If irritation persists, discontinue use and consult your practitioner. Replace cap tightly after use. To avoid contamination, do not touch tip to any surface. Keep out of reach of children. Remove contact lenses prior to use.
Wait 30 minutes before re-inserting lenses. Discard unused contents 6 months after opening. Ingredients Liquid paraffin 42.5% (w/w)
Soft white paraffin 57.3% (w/w)Contains: Liquid paraffin 42.5% w/w
Soft white paraffin 57.3% w/w Direction Dosage: Pull lower eyelid down and insert a small amount of ointment as needed or as directed.Storage Instructions Store below 25°C. Storage Temperature: Below 25ºC.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Murine Eye Mist is preservative free and specially formulated to gently moisturise and refresh dry & tired eyes.Dry eyes are a common problem for many individuals. Computer work, ageing and wearing contact lenses can cause a disruption to the eye s natural protective barrier.Murine Eye Mist restores and stabilises the natural tear film, reducing moisture loss. The eye mist applies liposome particles onto the closed eyelids that refresh and maintains the natural moisture in and around the eyes.Soothing relief for:- Dry Eyes.- Tired Eyes.- Itchy Eye Symptoms (Relief for itchy eye symptoms due to a disruption to the natural tear film).Spray onto closed eyelids.Preservative free.Suitable for use with contact lenses and waterproof makeup.Suitable For: 12 years and overBoxed Contents: 15mLSize: 15mL Warnings Keep out of reach of children. CautionKeep out of reach of children. Ingredients Liposystem complex, Boric acid, Sodium tetraborate, Sodium chloride. Natural extracts of: Capparis spinosa, Helichrysum italicum, Euphrasia officinalis, Glycyrrhiza glabra. Isotonic solution buffered at pH 7.2.Contains: Liposystem complex, Boric acid, Sodium tetraborate, Sodium chloride. Natural extracts of: Capparis spinosa, Helichrysum italicum, Euphrasia officinalis, Glycyrrhiza glabra. Isotonic solution buffered at pH 7.2. Direction 1. Hold spray 10cm away from the eye.
2. Close eyes and spray directly onto each eyelid 1 to 2 times.
3. Keep eyes closed for 4-5 seconds. This allows the liposome particles to spread onto the surface of the eyes.
4. Do not touch spray pump onto eyes or any other surface.
5. Do not spray the product onto the open eye.
Usage: Use as often as needed.
For further information refer to enclosed leaflet.
Murine Eye Mist can be used until expiry date.The product remains sterile after first opening and can be used until the expiry date. Don't freeze, keep away from heat. Store below 25°C.Storage Instructions Store below 25°C.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USE.Description Livostin Eye Drops relieve watery, itchy or red eyes due to hayfever or allergic conjunctivitiesin minutes.Size: 4mL Warnings Do not use ✘ if pregnant or breastfeeding ✘ for more than 4 weeks.CautionFor external use only Ingredients levocabastine hydrochloride .54 mg/mL Equivalent: levocabastine .5 mg/mL
benzalkonium chloride
dibasic sodium phosphate
disodium edetate
hypromellose
monobasic sodium phosphate
polysorbate 80
propylene glycol
water for injectionsContains: Benzalkonium chloride 0.15mg/mL and Disodium edetate 0.15mg/mL as preservatives Direction Directions for useAdults and children 6 years of age and over: Shake well before use. One drop in each eye twice daily. Maimum dose 3-4 times daily. You ar eadvised not to wear soft contact lenses while using Livostin Eye Drops. Discard 4 weeks after opening.Do not use if pregnant.
ALWAYS READ THE LABEL AND FOLLOW THE DIRECTIONS FOR USEDescription TearsAgain is applied onto closed eyelids to hydrate dry eyes and reduce moisture evaporation. It’s gentle on sensitive eyes, and suitable for use with contact lenses and eye makeup.TearsAgain targets the cause of dry eyes rather than just the symptoms. It helps create lubrication between the eye and the lid, repairing the lipid layer.Suitable For: TearsAgain is suitable for adults and children over 12. Consult your healthcare provider or pharmacist for more information on children under 12 using TearsAgain.Boxed Contents: 10 mLSize: 10 mL Warnings Read package insert before use. Store in a cool dry place. Keep out of reach of children. Can be used up to 6 months after first use. Do not use after expiry date.
TearsAgain should not be used simultaneously with eye medicine. Should eye drugs other than TearsAgain be used, observe an interval of 10 minutes between the two applications. Read package insert before use. Ingredients Soy Lecithin, Sodium, Chloride, Ethanol, Phenoxyethanol, Vitamin A Palmitate, Vitamin E and Purified Water.Active Ingredients: Soy Lecithin, Sodium, Chloride, Ethanol, Phenoxyethanol, Vitamin A Palmitate, Vitamin E and Purified Water. Direction Hold Tears Again Liposomal Eye Spray 10 cm away from the eye. Close eyes and spray onto each eyelid 1-2 times.
Use as often as required.
SEEK ADVICE FROM A HEALTH PROFESSIONAL BEFORE USEWarnings -Wash hands thoroughly before use.
-Do not mix with other fluids except as directed.
-Do not touch ampoule tip with any other surface.
-Do not use if allergic to any of the ingredients.
-Do not use if twist top is broken or missing.
-Do not use unless solution is clear.
-if eye vision changes or eye becomes irritated, stop usage and consult a doctor.
-Do not use if eye is lacerated or an object is embeded.
-not for injection.
-Keep out of reach of children.
-Once opened, discard any unused solution. Ingredients Contents: Sodium Chloride 0.57% , Potassium Di-Hydrogen Phosphate 0.68%, Sodium Hydroxide 0.15%, Purified WaterDirection 1.Detach a uni-dose ampoule.
2. Twist off detachable top.
3. Dispense solution into a cup.
4. Invert cup over open eye and blink.
