Ingredients ACRYLIC LIQUID:
Ethyl Methacrylate, HEMA, Glycol Dimethacrylate, Dimethyltolylamine, Benzophenone-3, Hydroquinone, Violet 2 (CI 60725) - Made in USA
ACRYLIC POWDER:
Polyethylmethacrylate, Acrylates Copolymer, Benzoyl Peroxide, PEG-12 Dimethicone - Made in USADirection PREPARATION:
Clean nails with acetone-based nail polish remover
Gently buff area of new nail growth with the fine side of file, blending existing acrylic overlay
HOW TO APPLY:
Apply primer to the growth area of natural nail only. Do not get on skin or cuticles. Let dry
Place a small bead of acrylic mixture onto growth area where the natural nail meets the overlay. Allow to level then pull down to blend with the entire nail surface and pat down until smooth
Allow acrylic to harden for 3 – 5 minutes. Tap the nail surface with a manicure stick. A sharp “clicking” sound means the overlay is dry
File entire nail surface to smooth and even overlay surface
Use fine side of file or a KISS® White Buff Block to smooth and finish
Apply clear polish for a glossy finish
HOW TO REMOVE:
Do not force, pry or pull nails off.
Trim as much length off as possible and soak in an acetone-based polish remover for approximately 20 minutes, continuously wiping nail surface on paper towels until overlay melts off completely
Ingredients NAILS: ABS Plastic.
GLUE: Ethyl Cyanoacrylate, Polymethyl Methacrylate.Direction PREPARING NATURAL NAILS: Clean nails or any polish or oil with nail polish remover, trim and file the free edge of nails push back cuticles with a manicure stick.
Select the correct size tip for each finger. If needed, file sides of nails for a correct fit place in-sequence. Holding artificial nail by numbered edge apply glue onto the back area where it will come in contact with your natural nail.
Apply a layer of nail glue onto natural nail. Be sure to apply enough glue for proper adhesion. Hold firmly until set. Shape and file to desired length.
HOW TO REMOVE: Do not force or pull nails off trim off as much artificial nail as possible for quick easy removal use KISS all or one artificial nail remover kit or soak nails in acetone-based nail polish remover until soft.
Wipe off softened plastic and glue repeat process as necessary.
Description A DIY salon-style lash extension alternative with gentle ingredients. Multitasker remover provides gentle, easy, non-damaging removal of FALSCARA and eye makeup NET WT 50 ml (1.69 fl oz.) Effortlessly removes WISPS after you've worn them for a day or for up to 10 days Compatible with OVERNIGHTER Long Wear Sealer (sold separately and in Falscara Complete DIY lash Extensions Kit)Size: 50ml Warnings IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do so.
Read directions for use carefully
Keep out of reach of children
Discontinue use if irritation occurs
Do not use if you are suffering from eye inflammation or conjunctivitis Ingredients Water, Cyclopentasiloxane, Cyclohexasiloxane, lsohexadecane, Butylene Glycol, Rosa Damascena Flower Water, Sodium Citrate, Benzalkonium Chloride, Cetrimonium Chloride, Benzyl Alcohol, Poloxamer 184, Disodium EDTA, Citric Acid, Dipotassium Glycyrrhizate, Glycyrrhiza Glabra (Licorice) Root Extract, Chamomilla Recutita (Matricaria) Flower/Leaf Extract, Isopropyl Alcohol, Portulaca Oleracea Extract, Phenoxyethanol, Fragrance, Red 40Direction HOW TO REMOVE:
Shake well!
Take a cotton pad and saturate with REMOVER.
Place over eyes; hold for 10 seconds to let REMOVER work its magic!
Gently wipe away to remove WISPS* and BOND & SEAL*
Repeat as necessary until there is no more BOND & SEAL residue left.
*sold separately
HOW TO CLEAN & REUSE:
Place WISPS on a cotton pad or paper towel
Drop some REMOVER onto the WISPS. Let sit for 10 seconds
Saturate a cotton swab with REMOVER & work gently to wipe away any BOND & SEAL residue on the WISPS
Repeat until WISPS are clean and ready to be used again!
To store WISPS for reuse, open the holder and place WISPS inside
Share Share on Facebook
Ingredients Ethyl Cyanoacrylate, Triacetin, Polymethyl Methacrylate, BHADirection How to use:
TIP APPLICATION:
Clean nails with acetone-based polish remover
Apply glue to free edge of nail
Place Tip onto nail and press firmly
Apply glue at seam to secure adhesion
NAIL REPAIR:
Apply a tiny drop of glue on split or cracked nail
Hold repair in place with manicure stick for 3 seconds; buff to a smooth finish
FALSE NAIL REMOVAL:
Do not force or pull nails off
Trim & file surface to disrupt protective top coat
Soak nails in acetone polish remover until soft
Wipe off softened nails & glue
Description DIY salon-style lash extension alternative with gentle ingredients. What’s so unique about Falscara? Unlike traditional falsies, Falscara WISPS are tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible. That’s what makes them look so natural. Use BOND & SEAL with Falscara WISPS--tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible.
Includes: BOND-to prime & prep lashes. SEAL-to remove residue and hold WISPS in place
BOND & SEAL also comes in value-priced Falscara Kits
WISPS are reusable up to 3x with proper care
Use with Falscara WISPS, APPLICATOR, and REMOVER (sold separately)
For long wear, use with OVERNIGHTER Long Wear Sealer (sold separately and in the new Falscara Complete DIY lash Extensions Kit)
Boxed Contents: Falscara Bond & Seal applicationSize: 4.5g Warnings Keep out of reach of children
Avoid contact with eyes, if contact occurs, wash immediately with lukewarm water
Do not use if you are suffering from eye inflammation or conjunctivitis Ingredients BOND:
Acrylates/Ethylhexyl Acrylate Copolymer, Butylene Glycol, Alcohol Denat., Water, AMP-Acrylates Copolymer, Phenoxyethanol, Citric Acid, Sodium Carbonate, Sorbitol, Ceteareth-25, Ethylhexylglycerin, Urea, Disodium Phosphate, Biotin, Black 2 NET WT 4.5 g (0.15 oz.)
SEAL:
Isododecane, Water, Copernicia Cerifera (Carnauba) Wax, VP/Eicosene Copolymer, Euphorbia Cerifera (Candelilla) Wax, Ceresin, Trimethylsiloxysilicate, VP/VA Copolymer, Panthenol, Hydrogenated Polyisobutene, PEG-60 Hydrogenated Castor Oil, Phenoxyethanol, Polypropylsilsesquioxane, 1,2-Hexanediol, Ethylhexylglycerin, Tocopheryl Acetate NET WT 4.5 g (0.15 oz.)Direction HOW TO APPLY:
Brush a light coat of BOND on natural lashes. A little goes a long way!
Use the included APPLICATOR to pluck a WISP from the tray. Pick up a WISP from the middle-outer end for optimal control. One by one, gently place the WISPS underneath the base of your natural lashes, slightly away from the waterline. Apply wisps starting from the outer corner of lash line, working inwards (or vice versa). Place WISPS right next to each other for a seamless look
Dab a thin coat of SEAL under WISPS to eliminate any sticky residue and hold WISPS in place. Pro tips: If needed, after applying SEAL under WISPS, use the APPLICATOR or your fingers to squeeze the WISPS against your natural lashes; this helps the WISPS adhere for a more secure hold
HOW TO REMOVE:
Saturate a cotton pad with Falscara REMOVER or oil-free makeup remover
Place pad over eyes for 10 seconds, then gently wipe or peel off WISPS and BOND & SEAL
Ingredients ACRYLIC LIQUID:
Ethyl Methacrylate, HEMA, Glycol Dimethacrylate, Dimethyltolylamine, Benzophenone-3, Hydroquinone, Violet 2 (CI 60725) - Made in USA
ACRYLIC POWDER:
Polyethylmethacrylate, Acrylates Copolymer, Benzoyl Peroxide, PEG-12 Dimethicone - Made in USADirection PREPARING NATURAL NAILS: Clean nails with acetone-based nail polish remover
Gently buff area of new nail growth with the fine side of file, blending existing acrylic overlay
HOW TO APPLY: Apply primer to the growth area of natural nail only. Do not get on skin or cuticles. Let dry.
Place a small bead of acrylic mixture onto growth area where the natural nail meets the overlay. Allow to level then pull down to blend with the entire nail surface and pat down until smooth.
Allow acrylic to harden for 3 – 5 minutes. Tap the nail surface with a manicure stick. A sharp “clicking” sound means the overlay is dry.
File entire nail surface to smooth and even overlay surface.
Use fine side of file or a KISS® White Buff Block to smooth and finish.
Apply clear polish for a glossy finish.
HOW TO REMOVE: Do not force, pry or pull nails off.
Trim as much length off as possible and soak in an acetone-based polish remover for approximately 20 minutes, continuously wiping nail surface on paper towels until overlay melts off completely.
Ingredients Rosin (Colophonium, Colophane), Styrene/Isoprene Copolymer, Polyethylene Terephthalate – Made in Korea; Lashes made in IndonesiaDirection HOW TO APPLY:
Pluck a cluster from the tray
Place the cluster underneath your natural lashes
Squeeze clusters and natural lashes together with the applicator
HOW TO REMOVE:
With clean hands, use your finger to remove the clusters by gently lifting them off, starting with the band side
Ingredients NAILS: ABS Plastic.
GLUE: Ethyl Cyanoacrylate, Polymethyl Methacrylate.Direction How to apply:
PREPARING NATURAL NAILS: Clean nails or any polish or oil with nail polish remover, trim and file the free edge of nails push back cuticles with a manicure stick.
Select the correct size tip for each finger. If needed, file sides of nails for a correct fit place in-sequence. Holding artificial nail by numbered edge apply glue onto the back area where it will come in contact with your natural nail.
Apply a layer of nail glue onto natural nail. Be sure to apply enough glue for proper adhesion. Hold firmly until set. Shape and file to desired length.
HOW TO REMOVE: Do not force or pull nails off trim off as much artificial nail as possible for quick easy removal use KISS all or one artificial nail remover kit or soak nails in acetone-based nail polish remover until soft.
Wipe off softened plastic and glue repeat process as necessary.
Ingredients NAILS: ABS Plastic.
GLUE: Ethyl Cyanoacrylate, Polymethyl Methacrylate.Direction How to apply:
PREPARING NATURAL NAILS: Clean nails or any polish or oil with nail polish remover, trim and file the free edge of nails push back cuticles with a manicure stick.
Select the correct size tip for each finger. If needed, file sides of nails for a correct fit place in-sequence. Holding artificial nail by numbered edge apply glue onto the back area where it will come in contact with your natural nail.
Apply a layer of nail glue onto natural nail. Be sure to apply enough glue for proper adhesion. Hold firmly until set. Shape and file to desired length.
HOW TO REMOVE: Do not force or pull nails off trim off as much artificial nail as possible for quick easy removal use KISS all or one artificial nail remover kit or soak nails in acetone-based nail polish remover until soft.
Wipe off softened plastic and glue repeat process as necessary.
Description Lash in a flash, with no damage to your natural lashes, and no sticky residue to remove. Kit has enough clusters for 2-3 applications Includes 20 pre-bonded clusters No glue needed Secure 24-hour hold No damage to natural lashes Easy removal with no residue Falsie clusters go under your natural lashes New, innovative nonstick applicatorIngredients Rosin (Colophonium, Colophane), Styrene/Isoprene Copolymer, Polyethylene Terephthalate – Made in Korea; Lashes made in IndonesiaDirection HOW TO APPLY:
Pluck a cluster from the tray
Place the cluster underneath your natural lashes
Squeeze clusters and natural lashes together with the applicator
HOW TO REMOVE:
With clean hands, use your finger to remove the clusters by gently lifting them off, starting with the band side
Description Starter Kit: A DIY salon-style lash extension alternative with gentle ingredients. What’s so unique about Falscara? Unlike traditional falsies, Falscara WISPS are tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible. That’s what makes them look so natural. Value priced kit includes: BOND & SEAL to prep lashes and hold WISPS, 4.5 g (0.15 oz.) each; 10 WISPS–featherlight fibers that go under your natural lashes; APPLICATOR- for optimal WISP placement. For long wear, use with OVERNIGHTER Long Wear Sealer (sold separately and in the Falscara Complete DIY Lash Extensions Kit) WISPS are rewearable up to 3x Each item in the Falscara system, including value-priced WISP multipacks, also sold separately Wisps-10- 12mmIngredients BOND:
Acrylates/Ethylhexyl Acrylate Copolymer, Butylene Glycol, Alcohol Denat., Water, AMP-Acrylates Copolymer, Phenoxyethanol, Citric Acid, Sodium Carbonate, Sorbitol, Ceteareth-25, Ethylhexylglycerin, Urea, Disodium Phosphate, Biotin, Black 2 NET WT 4.5 g (0.15 oz.)
SEAL:
Isododecane, Water, Copernicia Cerifera (Carnauba) Wax, VP/Eicosene Copolymer, Euphorbia Cerifera (Candelilla) Wax, Ceresin, Trimethylsiloxysilicate, VP/VA Copolymer, Panthenol, Hydrogenated Polyisobutene, PEG-60 Hydrogenated Castor Oil, Phenoxyethanol, Polypropylsilsesquioxane, 1,2-Hexanediol, Ethylhexylglycerin, Tocopheryl Acetate NET WT 4.5 g (0.15 oz.)Direction HOW TO APPLY:
Brush a light coat of BOND on natural lashes. A little goes a long way!
Use the included APPLICATOR to pluck a WISP from the tray. Pick up a WISP from the middle-outer end for optimal control. One by one, gently place the WISPS underneath the base of your natural lashes, slightly away from the waterline. Apply wisps starting from the outer corner of lash line, working inwards (or vice versa). Place WISPS right next to each other for a seamless look
Dab a thin coat of SEAL under WISPS to eliminate any sticky residue and hold WISPS in place. Pro tips: If needed, after applying SEAL under WISPS, use the APPLICATOR or your fingers to squeeze the WISPS against your natural lashes; this helps the WISPS adhere for a more secure hold
HOW TO REMOVE:
Saturate a cotton pad with Falscara REMOVER or oil-free makeup remover
Place pad over eyes for 10 seconds, then gently wipe or peel off WISPS and BOND & SEAL
HOW TO REUSE WISPS:
Place used WISPS on a paper towel, coat with Falscara REMOVER or oil-free makeup remover, then let sit for 10 seconds
Saturate a cotton swab with remover and gently wipe away BOND & SEAL residue from the WISPS. Store WISPS in original packaging
Ingredients NAILS:
ABS Plastic - Made in China
ADHESIVE TABS:
Acrylates/Ethylhexyl Acrylate Copolymer – Made in Korea
GLUE:
Ethyl Cyanoacrylate, Polymethyl Methacrylate, Tetrahydrofuran, Sulfur Dioxide, Red 7 (CI 15850:1) - Made in USADirection How to apply:
PREPARATION:
Clean nails with nail polish remover and wash hands thoroughly with soap; select correct size nail for each finger and set aside in order.
Nails are sized by number, noted underneath nail.
ADHESIVE TAB APPLICATION:
Nails and adhesive tabs have coordinating sizes. Select adhesive tab that coordinates with selected nail size & peel off sheet.
Apply adhesive tab to natural nail, press & smooth; peel off film.
Align nail with cuticle and press down firmly starting in the middle, then each side.
*If nail contains glitter it may cause an uneven edge; use enclosed file to gently file smooth.
EXPERT TIP: For best wear, press nails down several times; avoid contact with water for the first hour.
REMOVAL: Apply polish remover around edges, wait 1 minute and gently peel off nail from sides.
_______________________________________________________________________________________________________________________________________________
GLUE APPLICATION:
Apply glue to back of artificial nail.
Apply glue to natural nail.
Align with cuticle, gently press on & hold for 5 seconds. *Glitter may cause an uneven edge; use enclosed file to gently file smooth.
EXPERT TIP: Apply enough glue to avoid air pockets, secure adhesion, and extend wear.
REMOVAL: Trim & file surface to disrupt protective top coat. Soak nails in acetone polish remover until soft.
Wipe off softened nails & glue. Do not force or pull nails off.
Description Lash in a flash, with no damage to your natural lashes, and no sticky residue to remove. Kit has enough clusters for 2-3 applications Includes 20 pre-bonded clusters No glue needed Secure 24-hour hold No damage to natural lashes Easy removal with no residue Falsie clusters go under your natural lashes New, innovative nonstick applicatorIngredients Rosin (Colophonium, Colophane), Styrene/Isoprene Copolymer, Polyethylene Terephthalate – Made in Korea; Lashes made in IndonesiaDirection HOW TO APPLY:
Pluck a cluster from the tray
Place the cluster underneath your natural lashes
Squeeze clusters and natural lashes together with the applicator
HOW TO REMOVE:
With clean hands, use your finger to remove the clusters by gently lifting them off, starting with the band side
