Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns. • No Smudge permanent colour for eyelashes and brows • Beautiful, professional results in just 3 easy steps • 12 applications per pack • Quick and easy to use • Safe and effective • Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint • Waterproof, does not smudge or run • Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in Australia Size: 1 pack, 12 Applications Warnings This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use. First Aid InformationFor advice, contact a Poisons Information Centre phone Australia 131126 or a doctor. If swallowed, do NOT induce vomiting. If in eye, was out immediately with water. Ingredients Developer Liquid: 3% Hydrogen Peroxide
Cream: Aqua, Cetearyl Alcohol, Sodium Cetearyl Sulfate, Sodium Laureth Sulfate, Resorcinol, p-Phenylenediamine, m-Aminophenol, p-Aminophenol, Ammonia, CI 77499, CI 77491, CI 77492.Direction "
1. Remove natural oils and make up with a non-oily cleanser from lashesand brows.
2. Lashes: Take two eye protection papers and apply Vaseline on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. (See diagram below).
3. Brows: Apply Vaseline with a cotton bud around the brow to protect the skin from coming in contact with the dye.
4. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
5. Apply the dye using the white wand or spoolie in the same manner as applying mascara. Leave the dye to develop for ten minutes.
6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad.""1. Remove natural oils and make up with a non-oily cleanser from lashes and brows.
2. Lashes: Take two eye protection papers and apply Petroleum Jelly on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. Brows: Apply Petroleum Jelly with a cotton bud around the brow to protect the skin from coming in contact with the dye.
3. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
LASHES: 4. Apply the dye using the white wand or spoolie in the same manner as applying mascara. 5. Leave the dye to develop for ten minutes. 6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad.
BROWS: 4. Using the white wand or spoolie apply the dye mixture to the brows using an upward motion brushing on the cream in the same direction as the hair growth. 5. Leave on for three to ten minutes to develop, depending on preferred depth of colour. 6. Gently remove the dye with a damp cotton pad."
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and sideburns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaBoxed Contents: Developer liquid, colour cream, mixing tray, applicator wands, under eye protector pads and storage coverSize: 12 Applications Warnings This product contains ingredients which may cause skin irritation to certain individuals, and when used for eyelash and eyebrow tinting may cause injury to the eye. A preliminary test according to the accompanying directions should be made before every use. First Aid InformationFor advice, contact a Poisons Information Centre phone Australia 131126 or a doctor. If swallowed, do NOT induce vomiting. If in eye, was out immediately with water. Ingredients Cream: Aqua, Cetearyl Alcohol, p-Phenylenediamine, m-Aminophenol, Sodium Cetearyl Sulfate, Sodium Laureth Sulfate, 2,4-Diaminophenoxyethanol Sulfate, 2,6-Diaminopyridine, Resorcinol, Ammonia CI 77499, CI77491. Developer Liquid: 3% Hydrogen PeroxideDirection 1. Remove natural oils and make up with a non-oily cleanser from lashes and brows.
2. Lashes: Take two eye protection papers and apply Petroleum Jelly on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. Brows: Apply Petroleum Jelly with a cotton bud around the brow to protect the skin from coming in contact with the dye.
3. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
LASHES: 4. Apply the dye using the white wand or spoolie in the same manner as applying mascara. 5. Leave the dye to develop for ten minutes. 6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad.
BROWS: 4. Using the white wand or spoolie apply the dye mixture to the brows using an upward motion brushing on the cream in the same direction as the hair growth. 5. Leave on for three to ten minutes to develop, depending on preferred depth of colour. 6. Gently remove the dye with a damp cotton pad.
Description 1000HOUR™ brush-in gel formula uses a gentle plant extract colour gel. Ideal for more sensitive skin or those who cannot use peroxide-based products, making it a perfect alternative to daily lash and brow makeup application, or expensive brow clinic visits. • Dermatologically & Ophthalmologically tested• No smudge, waterproof colour for eyelashes and brows• Results that last up to six-weeks (in line with your natural lash turnover)• Quick and easy to use• 12 applications per pack (12-month supply)• Beautiful, professional results• Natural looking shades to enhance lashes and brows• Assembled in Australia from imported components. Colour Crème and Developer Gel made in EU • Product ingredients include nutsWarnings No Ingredients Colour Cream (tube 1): Aqua, Alcohol denat, (Calendula Officinalis/Safflower Flower/Achillea Millefolium Flower, Leaf and Stem/Vaccinium Myrtillus/Vitex Agnus-Castus Fruit/Rhus Chinensis Gall/Walnut Husk/Camellia Sinensis/Nettle Leaf/Juniperus Communis Leaf and Stem/Horse Chestnut Nut/Dichroa Febrifuga Root/Grape Seed/Acacia Catechu Wood/Goldenrod/ Hypericum Perforatum Extract) Carbomer, Ascorbic Acid, Sodium Hydroxide. Developer Gel (tube 2):Aqua, Silver Nitrate, Ammonium Acryloyldimethyltaurate/VP Copolymer, Ammonia.Direction 1. Make sure lashes and brows are completely clean by removing natural oils as well as make up with a non-oily cleanser.
2. Lashes: Take two eye protection papers and put some Vaseline on one side of the eye protection papers. Press the papers right up under the eye and adhere to the skin as close as possible to the bottom lashes.
3. Brows: Apply Vaseline with a cotton bud on the skin around the brow to protect it from coming in contact with the dye.
4. Squeeze 2cm of the colour cream into the clean mixing cup. Then apply to the lashes using the black applicator wand as if you are applying mascara.
5. Apply to the brows at the same time using an upward motion brushing on the cream in the same direction as the hair growth.
6. Leave on for 2 minutes.
7. THEN REMOVE THE COLOUR CREAM FROM LASHES & BROWS USING A DRY COTTON PAD.
8. Squeeze 2cm of the developer gel into the clean mixing cup. Then apply to the lashes using the pink applicator wand as if you are applying mascara. Apply to the brows at the same time using an upward motion brushing on the developing gel in the same direction as the hair growth.
9. Leave on for 1 minute
10. CLEANING THE EYELASHES AND BROWS: At the end of the application time, remove excess developer gel using a damp cotton pad.
Description 1000HOUR™ brush-in gel formula uses a gentle plant extract colour gel. Ideal for more sensitive skin or those who cannot use peroxide-based products, making it a perfect alternative to daily lash and brow makeup application, or expensive brow clinic visits. • Dermatologically & Ophthalmologically tested• No smudge, waterproof colour for eyelashes and brows• Results that last up to six-weeks (in line with your natural lash turnover)• Quick and easy to use• 12 applications per pack (12-month supply)• Beautiful, professional results• Natural looking shades to enhance lashes and brows• Assembled in Australia from imported components. Colour Crème and Developer Gel made in EU • Product ingredients include nutsWarnings No Ingredients Colour Cream (tube 1): Aqua, Alcohol denat, (Calendula Officinalis/Safflower Flower/Achillea Millefolium Flower, Leaf and Stem/Vaccinium Myrtillus/Vitex Agnus-Castus Fruit/Rhus Chinensis Gall/Walnut Husk/Camellia Sinensis/Nettle Leaf/(Juniperus Communis Leaf and Stem/Horse Chestnut Nut/Dichroa Febrifuga Root/Grape Seed/Acacia Catechu Wood/Goldenrod/ Hypericum Perforatum Extract) Carbomer, Sodium Hydroxide. Developer Gel (tube 2):Aqua, Silver Nitrate, Ammonium Acryloyldimethyltaurate/VP Copolymer, Ammonia.Direction "1. Make sure lashes and brows are completely clean by removing natural oils as well as make up with a non-oily cleanser.
2. Lashes: Take two eye protection papers and put some Vaseline on one side of the eye protection papers. Press the papers right up under the eye and adhere to the skin as close as possible to the bottom lashes.
3. Brows: Apply Vaseline with a cotton bud on the skin around the brow to protect it from coming in contact with the dye.
4. Squeeze 2cm of the colour cream into the clean mixing cup. Then apply to the lashes using the black applicator wand as if you are applying mascara.
5. Apply to the brows at the same time using an upward motion brushing on the cream in the same direction as the hair growth.
6. Leave on for 2 minutes.
7. THEN REMOVE THE COLOUR CREAM FROM LASHES & BROWS USING A DRY COTTON PAD.
8. Squeeze 2cm of the developer gel into the clean mixing cup. Then apply to the lashes using the pink applicator wand as if you are applying mascara. Apply to the brows at the same time using an upward motion brushing on the developing gel in the same direction as the hair growth.
9. Leave on for 1 minute
10. CLEANING THE EYELASHES AND BROWS: At the end of the application time, remove excess developer gel using a damp cotton pad."
Description A DIY salon-style lash extension alternative with gentle ingredients. Multitasker remover provides gentle, easy, non-damaging removal of FALSCARA and eye makeup NET WT 50 ml (1.69 fl oz.) Effortlessly removes WISPS after you've worn them for a day or for up to 10 days Compatible with OVERNIGHTER Long Wear Sealer (sold separately and in Falscara Complete DIY lash Extensions Kit)Size: 50ml Warnings IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do so.
Read directions for use carefully
Keep out of reach of children
Discontinue use if irritation occurs
Do not use if you are suffering from eye inflammation or conjunctivitis Ingredients Water, Cyclopentasiloxane, Cyclohexasiloxane, lsohexadecane, Butylene Glycol, Rosa Damascena Flower Water, Sodium Citrate, Benzalkonium Chloride, Cetrimonium Chloride, Benzyl Alcohol, Poloxamer 184, Disodium EDTA, Citric Acid, Dipotassium Glycyrrhizate, Glycyrrhiza Glabra (Licorice) Root Extract, Chamomilla Recutita (Matricaria) Flower/Leaf Extract, Isopropyl Alcohol, Portulaca Oleracea Extract, Phenoxyethanol, Fragrance, Red 40Direction HOW TO REMOVE:
Shake well!
Take a cotton pad and saturate with REMOVER.
Place over eyes; hold for 10 seconds to let REMOVER work its magic!
Gently wipe away to remove WISPS* and BOND & SEAL*
Repeat as necessary until there is no more BOND & SEAL residue left.
*sold separately
HOW TO CLEAN & REUSE:
Place WISPS on a cotton pad or paper towel
Drop some REMOVER onto the WISPS. Let sit for 10 seconds
Saturate a cotton swab with REMOVER & work gently to wipe away any BOND & SEAL residue on the WISPS
Repeat until WISPS are clean and ready to be used again!
To store WISPS for reuse, open the holder and place WISPS inside
Share Share on Facebook
Ingredients Methoxyisopropyl Acetate, Nitrocellulose, Alcohol Denat.Direction Before applying individual lashes, thoroughly clean your natural eyelashes and eyelid so they are makeup and oil free.
Place 2-3 drops of LashTite Adhesive onto a small piece of foil. Dip the knotted end of the lash in the adhesive, then place the knotted end onto your own lashes close to the eyelid where required and press gently for a few seconds. Continue the same method with each individual lash.
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaWarnings "This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use.
KEEP OUT OF REACH FROM CHILDREN." Ingredients Cream: Aqua, Cetearyl Alcohol, Toulene-2,5-Diamine, Sodium Laureth Sulfate, m-Aminophenol, Aminomethyl Propanol, Sodium Cetearyl Sulfate, 2,4-Diaminophenoxyethanol Sulfate, 2-Methylresorcinol, CI 77491, CI 77492, CI 77499.
Developer Liquid: 3% Hydrogen PeroxideDirection 1. Remove natural oils and make up
with a non-oily cleanser from lashes
and brows.
2. Lashes: Take two eye protection
papers and apply Vaseline on one
side of the paper. Place and press
the papers underneath the eyes
and adhere to the skin as close as
possible to the bottom lashes. (See
diagram below).
3. Brows: Apply Vaseline with a cotton
bud around the brow to protect the
skin from coming in contact with
the dye.
4. Squeeze a 2.5cm strip of the colour
cream into the mixing cup. Add ten
drops of the developer liquid and
mix together using the white wand
provided.
5. Apply the dye using the white wand
or spoolie in the same manner as
applying mascara. Leave the dye to
develop for ten minutes.
6. Remove the remaining dye by closing
eyes and wiping gently with a damp
cotton pad.
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in Australia Boxed Contents: Developer liquid, colour cream, mixing tray, applicator wands, under eye protector pads and storage coverSize: 12 Applications Warnings "This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use. First Aid InformationFor advice, contact a Poisons Information Centre phone Australia 131126 or a doctor. If swallowed, do NOT induce vomiting. If in eye, was out immediately with water. Ingredients Developer Liquid: 3% Hydrogen Peroxide
cream: Aqua, Cetearyl Alcohol, Sodium Cetearyl Sulfate, Sodium Laureth Sulfate, Resorcinol, p-Phenylenediamine, m-Aminophenol, p-Aminophenol, Ammonia, CI 77499, CI 77491, CI 77492.Direction "
1. Remove natural oils and make up with a non-oily cleanser from lashesand brows.
2. Lashes: Take two eye protection papers and apply Vaseline on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. (See diagram below).
3. Brows: Apply Vaseline with a cotton bud around the brow to protect the skin from coming in contact with the dye.
4. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
5. Apply the dye using the white wand or spoolie in the same manner as applying mascara. Leave the dye to develop for ten minutes.
6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad."1. Remove natural oils and make up with a non-oily cleanser from lashes and brows.
2. Lashes: Take two eye protection papers and apply Petroleum Jelly on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. Brows: Apply Petroleum Jelly with a cotton bud around the brow to protect the skin from coming in contact with the dye.
3. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
LASHES: 4. Apply the dye using the white wand or spoolie in the same manner as applying mascara. 5. Leave the dye to develop for ten minutes. 6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad.
BROWS: 4. Using the white wand or spoolie apply the dye mixture to the brows using an upward motion brushing on the cream in the same direction as the hair growth. 5. Leave on for three to ten minutes to develop, depending on preferred depth of colour. 6. Gently remove the dye with a damp cotton pad.
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaBoxed Contents: Developer liquid, colour cream, mixing tray, applicator wands, under eye protector pads and storage coverSize: 12 Applications Warnings This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use. First Aid InformationFor advice, contact a Poisons Information Centre phone Australia 131126 or a doctor. If swallowed, do NOT induce vomiting. If in eye, was out immediately with water. Ingredients Cream: Aqua, Cetearyl Alcohol, p-Phenylenediamine, m-Aminophenol, Resorcinol, Sodium Laureth Sulfate, p-Aminophenol, Sodium Cetearyl Sulfate, Ammonia, CI 77499, CI 77491, CI 77492. Developer Liquid: 3% Hydrogen Peroxide.Direction 1. Remove natural oils and make up with a non-oily cleanser from lashes and brows.
2. Lashes: Take two eye protection papers and apply Petroleum Jelly on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. Brows: Apply Petroleum Jelly with a cotton bud around the brow to protect the skin from coming in contact with the dye.
3. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
LASHES: 4. Apply the dye using the white wand or spoolie in the same manner as applying mascara. 5. Leave the dye to develop for ten minutes. 6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad.
BROWS: 4. Using the white wand or spoolie apply the dye mixture to the brows using an upward motion brushing on the cream in the same direction as the hair growth. 5. Leave on for three to ten minutes to develop, depending on preferred depth of colour. 6. Gently remove the dye with a damp cotton pad.
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaWarnings "This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use.
KEEP OUT OF REACH FROM CHILDREN." Ingredients Cream: Aqua, Cetearyl Alcohol, 2,4-Diaminophenoxyethanol Sulfate, Sodium Cetearyl Sulfate, p-Phenylenediamine, , Sodium Laureth Sulfate, CI77077. Developer Liquid: 3% Hydrogen PeroxideDirection 1. Remove natural oils and make up
with a non-oily cleanser from lashes
and brows.
2. Lashes: Take two eye protection
papers and apply Vaseline on one
side of the paper. Place and press
the papers underneath the eyes
and adhere to the skin as close as
possible to the bottom lashes. (See
diagram below).
3. Brows: Apply Vaseline with a cotton
bud around the brow to protect the
skin from coming in contact with
the dye.
4. Squeeze a 2.5cm strip of the colour
cream into the mixing cup. Add ten
drops of the developer liquid and
mix together using the white wand
provided.
5. Apply the dye using the white wand
or spoolie in the same manner as
applying mascara. Leave the dye to
develop for ten minutes.
6. Remove the remaining dye by closing
eyes and wiping gently with a damp
cotton pad.
Description When only the gold standard will do! Our Remy Collection features 100% premium-grade human hair, known in the industry as the highest quality available. This lash style is dark, voluminous and oh-so-shiny, which in turn looks more natural than other lash fibers. Keeping your lash game strong has never been easier.Product Features:Features 100% premium-grade human hairLooks more natural than other lash fibersDark, voluminous and oh-so-shinyIngredients not applicableDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Description DIY salon-style lash extension alternative with gentle ingredients. What’s so unique about Falscara? Unlike traditional falsies, Falscara WISPS are tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible. That’s what makes them look so natural. Use BOND & SEAL with Falscara WISPS--tiny clusters of featherlight false lashes that go under your natural lashes, so the bands aren't visible.
Includes: BOND-to prime & prep lashes. SEAL-to remove residue and hold WISPS in place
BOND & SEAL also comes in value-priced Falscara Kits
WISPS are reusable up to 3x with proper care
Use with Falscara WISPS, APPLICATOR, and REMOVER (sold separately)
For long wear, use with OVERNIGHTER Long Wear Sealer (sold separately and in the new Falscara Complete DIY lash Extensions Kit)
Boxed Contents: Falscara Bond & Seal applicationSize: 4.5g Warnings Keep out of reach of children
Avoid contact with eyes, if contact occurs, wash immediately with lukewarm water
Do not use if you are suffering from eye inflammation or conjunctivitis Ingredients BOND:
Acrylates/Ethylhexyl Acrylate Copolymer, Butylene Glycol, Alcohol Denat., Water, AMP-Acrylates Copolymer, Phenoxyethanol, Citric Acid, Sodium Carbonate, Sorbitol, Ceteareth-25, Ethylhexylglycerin, Urea, Disodium Phosphate, Biotin, Black 2 NET WT 4.5 g (0.15 oz.)
SEAL:
Isododecane, Water, Copernicia Cerifera (Carnauba) Wax, VP/Eicosene Copolymer, Euphorbia Cerifera (Candelilla) Wax, Ceresin, Trimethylsiloxysilicate, VP/VA Copolymer, Panthenol, Hydrogenated Polyisobutene, PEG-60 Hydrogenated Castor Oil, Phenoxyethanol, Polypropylsilsesquioxane, 1,2-Hexanediol, Ethylhexylglycerin, Tocopheryl Acetate NET WT 4.5 g (0.15 oz.)Direction HOW TO APPLY:
Brush a light coat of BOND on natural lashes. A little goes a long way!
Use the included APPLICATOR to pluck a WISP from the tray. Pick up a WISP from the middle-outer end for optimal control. One by one, gently place the WISPS underneath the base of your natural lashes, slightly away from the waterline. Apply wisps starting from the outer corner of lash line, working inwards (or vice versa). Place WISPS right next to each other for a seamless look
Dab a thin coat of SEAL under WISPS to eliminate any sticky residue and hold WISPS in place. Pro tips: If needed, after applying SEAL under WISPS, use the APPLICATOR or your fingers to squeeze the WISPS against your natural lashes; this helps the WISPS adhere for a more secure hold
HOW TO REMOVE:
Saturate a cotton pad with Falscara REMOVER or oil-free makeup remover
Place pad over eyes for 10 seconds, then gently wipe or peel off WISPS and BOND & SEAL
Description 1000HOUR™ brush-in gel formula uses a gentle plant extract colour gel. Ideal for more sensitive skin or those who cannot use peroxide-based products, making it a perfect alternative to daily lash and brow makeup application, or expensive brow clinic visits. • Dermatologically & Ophthalmologically tested• No smudge, waterproof colour for eyelashes and brows• Results that last up to six-weeks (in line with your natural lash turnover)• Quick and easy to use• 12 applications per pack (12-month supply)• Beautiful, professional results• Natural looking shades to enhance lashes and brows• Assembled in Australia from imported components. Colour Crème and Developer Gel made in EU • Product ingredients include nutsWarnings No Ingredients Colour Cream (tube 1): Aqua, Alcohol denat, (Calendula Officinalis/Safflower Flower/Achillea Millefolium Flower, Leaf and Stem/Vaccinium Myrtillus/Vitex Agnus-Castus Fruit/Rhus Chinensis Gall/Walnut Husk/Camellia Sinensis/Nettle Leaf/(Juniperus Communis Leaf and Stem/Horse Chestnut Nut/Dichroa Febrifuga Root/Grape Seed/Acacia Catechu Wood/Goldenrod/ Hypericum Perforatum Extract) Carbomer, Sodium Hydroxide. Developer Gel (tube 2): Aqua, Silver Nitrate, Ammonium Acryloyldimethyltaurate/VP Copolymer, Ammonia.Direction "1. Make sure lashes and brows are completely clean by removing natural oils as well as make up with a non-oily cleanser.
2. Lashes: Take two eye protection papers and put some Vaseline on one side of the eye protection papers. Press the papers right up under the eye and adhere to the skin as close as possible to the bottom lashes.
3. Brows: Apply Vaseline with a cotton bud on the skin around the brow to protect it from coming in contact with the dye.
4. Squeeze 2cm of the colour cream into the clean mixing cup. Then apply to the lashes using the black applicator wand as if you are applying mascara.
5. Apply to the brows at the same time using an upward motion brushing on the cream in the same direction as the hair growth.
6. Leave on for 2 minutes.
7. THEN REMOVE THE COLOUR CREAM FROM LASHES & BROWS USING A DRY COTTON PAD.
8. Squeeze 2cm of the developer gel into the clean mixing cup. Then apply to the lashes using the pink applicator wand as if you are applying mascara. Apply to the brows at the same time using an upward motion brushing on the developing gel in the same direction as the hair growth.
9. Leave on for 1 minute
10. CLEANING THE EYELASHES AND BROWS: At the end of the application time, remove excess developer gel using a damp cotton pad."
Description Create beautiful brows in an instant.Enhance your beauty with brows that frame the face and define eyes using 1000Hour tinted medium brown eyebrow gel. Natural-looking buildable colour boosts brow depth, while a light gel base tames and sets for perfect shape.• Brush-on tinted eyebrow gel• Long-wearing• Natural-looking• Buildable colourSize: 6g Warnings No CautionCaution: keep away from eyelashes. Ingredients Aqua, Glycerin, Copernicia Cerifera (Carnauba) Wax, PVP, Stearic Acid, Sorbitan Sesquioleate, Cera Alba, Triethanolamine, Polyacrylic Acid, Phenoxyethanol, Methylparaben, Propylparaben. Colours: CI77492, CI77891, CI77499Direction Apply using light upward and outward strokes to define and shape, gently blending with the tip to the outer edge to form an arch. Remove using cleanser or make-up remover.Storage Instructions Keep in a cool area. Keep tube tightly sealed when not in use.
Description Create beautiful brows in an instant.Enhance your beauty with brows that frame the face and define eyes using 1000Hour tinted black/dark brown eyebrow gel. Natural-looking buildable colour boosts brow depth, while a light gel base tames and sets for perfect shape.•Brush-on tinted eyebrow gel•Long-wearing•Natural-looking•Buildable colourSize: 6g Warnings No Ingredients Aqua, Glycerin, Copernicia Cerifera (Carnauba) Wax, PVP, Stearic Acid, Sorbitan Sesquioleate, Cera Alba, Triethanolamine, Polyacrylic Acid, Phenoxyethanol, Methylparaben, Propylparaben. Colours: CI77491, CI77492, CI77499Direction Apply using light upward and outward strokes to define and shape, gently blending with the tip to the outer edge to form an arch. Remove using cleanser or make-up remover.Storage Instructions Keep in a cool area. Keep tube tightly sealed when not in use.
Description 2 wispy lashes with a discreet band to heighten drama with a natural glamorous finish.Includes Hypoallergenic eyelash adhesive.Warnings DO NOT apply adhesive directly to eyelids. Ingredients Water, Styrene/Acrylates/Ammonium/Methacrylate Copolymer, Ethylparaben, MethylparabenDirection 1. For best results curl your lashes and apply one coat of mascara before applying lashes.
2. Measure the lashes against your eye and trim band to correct length (about 8% of your eye width).
3. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
4. Apply a thin coat of adhesive to lash band. Wait 2-3 seconds until glue becomes sticky. This will ensure the lashes stick properly.
5. Gently press the applicator above the natural lashes along the natural lash line.
6. Release lash applicator once entire lash is secure.Lash application should be the last step in your eye makeup routine.
Warnings DO NOT apply adhesive directly to eyelids. Ingredients Acrylates/Ethylhexyl Acrylate Copolymer, PropyleneGlycol, Phenoxyethanol, Ethylhexylglycerin, MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
- Measure the lashes against your eye and trim band to correct length (about 80% of your eye width).
-Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
-Apply a thin coat of adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
-Gently press the applicator above the natural lashes along the natural lash line.
-Release lash applicator once entire lash is secure.Lash application should be the last step in your eye make-up routine.
Ingredients Aqua (Water, Eau), Rubber Latex, Cellulose Gum, Sodium Dodecylbenzenesulfonate, Ammonium Hydroxide, Parfum (Fragrance), Coumarin, Geraniol, Limonene, Linalool,Formaldehyde. May Contain: CI 77499 (Iron Oxides).Direction 1) Pour 2-3 drops of Lash Adhesive onto a small piece of foil.
2) Gently grasp a single lash with tweezers near knotted end and pull from tray.
3) Dip knotted end of lash into adhesive.
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Glam By Manicare® beauty accessories are designed to enhance your beauty routine with quality tools for glam results. Accentuate your eyes and achieve dramatically curled and lifted lashes that last all day with the Glam By Manicare® heated lash curler. Designed using tech smart silicone pads heated to a warm and precise temperature to safely and gently lift and curl lashes in seconds. The curved dual silicone pads cushion and protect lashes without crimping, pulling or damaging. Suitable for curling natural and false lashes.--Fast Heating: Heats to a warm & safe temperature in 60 seconds.--Temperature Sensor: Heated pads change from pink to clear when ready.--Dual Silicone Pads: Designed to cushion & curl lashes without crimping.Use with 2 AAA batteries (not included).Size: 1 Pack Warnings KEEP OUT OF REACH OF CHILDREN.
• Silicone pads heat up to 73°C for effective styling.
• Do not use if any wounds or inflammation around the eyes are present or if you suffer from any eye conditions.
• If irritation or discomfort occurs, discontinue use and consult a medical professional.
• Do not share the same device with others.
• If not using for an extended period, remove batteries.
• To clean, allow the device to completely cool down and then gently wipe the silicone pads with a damp cloth and allow to dry. Do not immerse in water. Ingredients not applicableDirection How to:
1. Insert 2 AAA batteries into the battery compartment at the back of the device.
2. Slide the power switch to ON. The silicone pads will change colour from pink to clear to indicate that the curler is ready to use.
3. Hold the curler with the front facing the face and lightly clamp clean, dry lashes with the silicone pads by pushing the slider upwards.
4. Hold for 10 - 15 seconds. Repeat until the desired level of curl is achieved. After use, slide the power switch to OFF.HOT TIP: For best results, curl lashes before applying false lashes or mascara.
Description 1000HOUR™ brush-in gel formula uses a gentle plant extract colour gel. Ideal for more sensitive skin or those who cannot use peroxide-based products, making it a perfect alternative to daily lash and brow makeup application, or expensive brow clinic visits. • Dermatologically & Ophthalmologically tested• No smudge, waterproof colour for eyelashes and brows• Results that last up to six-weeks (in line with your natural lash turnover)• Quick and easy to use• 12 applications per pack (12-month supply)• Beautiful, professional results• Natural looking shades to enhance lashes and brows• Assembled in Australia from imported components. Colour Crème and Developer Gel made in EU • Product ingredients include nutsWarnings No Ingredients Colour Cream (tube 1): Aqua, Alcohol denat, (Calendula Officinalis/Safflower Flower/Achillea Millefolium Flower, Leaf and Stem/Vaccinium Myrtillus/Vitex Agnus-Castus Fruit/Rhus Chinensis Gall/Walnut Husk/Camellia Sinensis/Nettle Leaf/(Juniperus Communis Leaf and Stem/Horse Chestnut Nut/Dichroa Febrifuga Root/Grape Seed/Acacia Catechu Wood/Goldenrod/ Hypericum Perforatum Extract) Carbomer, Sodium Hydroxide. Developer Gel (tube 2):Aqua, Silver Nitrate, Ammonium Acryloyldimethyltaurate/VP Copolymer, Ammonia.Direction 1. Make sure lashes and brows are completely clean by removing natural oils as well as make up with a non-oily cleanser.
2. Lashes: Take two eye protection papers and put some Vaseline on one side of the eye protection papers. Press the papers right up under the eye and adhere to the skin as close as possible to the bottom lashes.
3. Brows: Apply Vaseline with a cotton bud on the skin around the brow to protect it from coming in contact with the dye.
4. Squeeze 2cm of the colour cream into the clean mixing cup. Then apply to the lashes using the black applicator wand as if you are applying mascara.
5. Apply to the brows at the same time using an upward motion brushing on the cream in the same direction as the hair growth.
6. Leave on for 2 minutes.
7. THEN REMOVE THE COLOUR CREAM FROM LASHES & BROWS USING A DRY COTTON PAD.
8. Squeeze 2cm of the developer gel into the clean mixing cup. Then apply to the lashes using the pink applicator wand as if you are applying mascara. Apply to the brows at the same time using an upward motion brushing on the developing gel in the same direction as the hair growth.
9. Leave on for 1 minute
10. CLEANING THE EYELASHES AND BROWS: At the end of the application time, remove excess developer gel using a damp cotton pad.
Description A dual-ended clear and dark lash adhesive.Featuring a brush tip applicator for easy, controlled application, Duo 2 In 1 Brush On Striplash Adhesive is an essential addition to your kit. The latex-free, hypoallergenic formula dries quickly for seamless false eyelash application every time.Ingredients Dark Tone: Acrylates/Ethylhexyl Acrylate, Copolymer, Water (Eau,Aqua), Retinol, Ascorbic Acid, Tocopherol, Ceteareth-25, Propylene Glycol, Peg-60 Hydrogenated Castor Oil, Glycerin, Phenoxyethanol, Iron Oxides (CI 77499).
White/Clear: Acrylates/Ethylhexyl Acrylate, Copolymer, Retinol, Ascorbic Acid, Tocopherol.Direction Step 1: Align band with natural lash line. Trim excess if necessary.
Step 2: Apply a thin line of adhesive along the lash band. Wait 30 seconds for adhesive to become tacky and set.
Step 3: Apply the lash by securing the band and gently pressing down.
Ingredients Water (Aqua, Eau), Rubber Latex, Cellulose Gum, Sodium Dodecylbenzenesulfonate, Ammonium Hydroxide, Parfum (Fragrance), Coumarin, Geraniol, Limonene, Linalool, FormaldehydeDirection 1) Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2) Apply a thin line of lash adhesive to the lash band and wait for 30 seconds for the adhesive to become tacky.
3) Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse.
Warnings DO NOT apply adhesive directly to eyelids. Ingredients Acrylates/Ethylhexyl Acrylate Copolymer, PropyleneGlycol, Phenoxyethanol, Ethylhexylglycerin, MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
- Measure the lashes against your eye and trim band to correct length (about 80% of your eye width).
-Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
-Apply a thin coat of adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
-Gently press the applicator above the natural lashes along the natural lash line.
-Release lash applicator once entire lash is secure.Lash application should be the last step in your eye make-up routine.
