Description Enriched with high level actives including Matrixyl, Collagen and Copper Peptide, Bondi Sands Plump It Up works to increase skin elasticity, firm skin and assist with anti-ageing for a youthful, hydrated complexion.Dermatologically tested.Suitable for sensitive skin.Non-comedogenic - won't clog pores.Fragrance free.Ingredients INGREDIENTS: AQUA (WATER), PROPANEDIOL, CAPRYLIC/CAPRIC TRIGLYCERIDE, GLYCERIN, HYDROXYETHYL ACRYLATE/SODIUM ACRYLOYLDIMETHYL TAURATE COPOLYMER, BUTYLENE GLYCOL, CHLORPHENESIN, TETRASODIUM EDTA, CARBOMER, POLYSORBATE 20, VITIS VINIFERA (GRAPE) SEED OIL, HYDROLYZED COLLAGEN (PLANT-DERIVED), COPPER TRIPEPTIDE-1, PALMITOYL TRIPEPTIDE-1, PALMITOYL TETRAPEPTIDE-7, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN.Direction Step 1 Apply 1-2 drops of Bondi Sands Plump It Up Peptide Serum to clean, dry skin.
Step 2 Once absorbed, follow with other serums or oils and finish with moisturiser.
Step 3 For best results, leave on overnight.
Ingredients AQUA (WATER), NIACINAMIDE, PROPANEDIOL, COCO-CAPRYLATE/CAPRATE, DICAPRYLYL CARBONATE, CETEARYL OLIVATE, ZINC PCA, BENZYL ALCOHOL, SORBITAN OLIVATE, GLYCERYL STEARATE, XANTHAN GUM, CITRIC ACID, DEHYDROACETIC ACID, TOCOPHEROL, GLYCERIN, GLYCINE SOJA (SOYBEAN) OIL, SYZYGIUM LUEHMANNII (CLOVE LILLI PILLI) FRUIT EXTRACT.Direction Step 1 Apply 2-3 drops of Bondi Sands Begin Again Vitamin B3 Serum to clean, dry skin.
Step 2 Once absorbed, follow with other serums or oils and finish with moisturiser.
Step 3 For best results, apply morning and night.
Description Emerald Technocolorhas been formulated for medium skin tones. Featuring a green guide colour and mid level active ingredients to counteract the development of orange tones for a deep, olive colour.Ingredients INGREDIENTS: AQUA (WATER), DIHYDROXYACETONE, PROPYLENE GLYCOL, TRIDECETH-9, POLYSORBATE 20, PEG-5 ETHYLHEXANOATE, GLYCERIN,
ETHOXYDIGLYCOL, ALOE BARBADENSIS LEAF EXTRACT, COCOS NUCIFERA (COCONUT) WATER, ERYTHRULOSE, SODIUM METABISULFITE, PEG-12 DIMETHICONE, PEG-12 ALLYL ETHER, PEG-12, DISODIUM EDTA, ETHYLHEXYLGLYCERIN, PANTHENOL, CI 14700 (RED 4), CI 19140 (YELLOW 5), CI 42090 (BLUE 1), PHENOXYETHANOL.Direction Step 1 For best results, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump Bondi Sands Technocolor Self Tanning Foam liberally to a Bondi Sands Technocolor Application Mitt and apply to body using long, sweeping motions.
Step 3 After 1 hour, shower with warm water and gently pat skin dry. For best results, leave on skin for a minimum of 3 hours.
Description Melt away the day with Bondi Sands Melt Me Cleansing Balm. This nourishing balm cleanser helps to remove makeup, sunscreen and excess oil whilst hydrating skin. Enriched with a blend of active ingredients and natural botanicals including Sea Buckthorn Oil and Ceramides, Melt Me works to deeply clean skin for a hydrated, cleansed complexion.Dermatologically tested.Suitable for sensitive skin.Non-comedogenic - won't clog pores.Fragrance free.Ingredients INGREDIENTS: HELIANTHUS ANNUUS (SUNFLOWER) SEED OIL, RICINUS COMMUNIS (CASTOR) SEED OIL, HYDROGENATED RAPESEED OIL, GLYCERYL CITRATE/LACTATE/LINOLEATE/OLEATE, POLYGLYCERYL-3 CAPRATE, POLYGLYCERYL-3 POLYRICINOLEATE, HELIANTHUS ANNUUS SEED CERA (HELIANTHUS ANNUUS (SUNFLOWER) SEED WAX), TOCOPHEROL, HIPPOPHAE RHAMNOIDES SEED OIL (SEA BUCKTHORN), ASCORBYL PALMITATE, OLEA EUROPAEA (OLIVE) FRUIT OIL, ANIGOZANTHOS FLAVIDUS FLOWER EXTRACT, ROSMARINUS OFFICINALIS (ROSEMARY) LEAF EXTRACT, CERAMIDE NG.Direction Step 1 On dry skin, use fingertips to massage Bondi Sands Melt Me Cleansing Balm over the entire face.
Step 2 Add warm water to emulsify formula, rinse well and remove using a damp facial cloth.
Tip Follow with the Bondi Sands Fresh'n Up Gel Cleanser for a double cleanse.
Ingredients AQUA (WATER), ASCORBIC ACID (VITAMIN C), GLYCERIN, PROPYLENE GLYCOL, PHENOXYETHANOL, XANTHAN GUM, BENZYL ALCOHOL, CARRAGEENAN, ETHYLHEXYLGLYCERIN, SODIUM CITRATE, CITRIC ACID, CITRUS AUSTRALASICA FRUIT EXTRACT, GLYCYRRHIZA GLABRA (LICORICE) ROOT EXTRACT, TERMINALIA FERDINANDIANA (KAKADU PLUM) FRUIT EXTRACT.Direction Step 1 Apply 2-3 drops of Bondi Sands Gold'n Hour Vitamin C Serum to clean, dry skin.
Step 2 Once absorbed, follow with other serums or oils and finish with moisturiser. If used in the morning, follow with SPF protection.
Step 3 For best results, apply morning or night.
Ingredients AQUA/WATER/EAU (WATER), DIHYDROXYACETONE (TANNING), PROPYLENE GLYCOL (SKIN CONDITIONING), TRIDECETH-9 (SURFACTANT), POLYSORBATE 20 (SURFACTANT), PEG-5 ETHYLHEXANOATE (SURFACTANT), GLYCERIN (SKIN CONDITIONING), PHENOXYETHANOL (PRESERVATIVE), BUTYLENE GLYCOL (SKIN CONDITIONING), DIMETHYL ISOSORBIDE (VISCOSITY CONTROLLING), SODIUM HYALURONATE (HYALURONIC ACID/HUMECTANT), ASCORBIC ACID (VITAMIN C/ANTIOXIDANT), TOCOPHERYL ACETATE (VITAMIN E/ANTIOXIDANT), ALOE BARBADENSIS EXTRACT (ALOE VERA/SKIN CONDITIONING), PEG-12 DIMETHICONE (SKIN CONDITIONING), ERYTHRULOSE (TANNING), PEG-12 (HUMECTANT), PEG-12 ALLYL ETHER (BINDING), DISODIUM EDTA (VISCOSITY CONTROLLING), POTASSIUM SORBATE (PRESERVATIVE), SODIUM BENZOATE (PRESERVATIVE), BENZYL ALCOHOL (PRESERVATIVE).Direction Discover the new way to tan. For best results, do not shake product prior to use. Empty space in the bottle is required to create the foam.
Step 1 For an even, streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Squeeze Bondi Sands Pure Self Tan Foaming Water directly onto skin. Use your Bondi Sands Application Mitt in long sweeping motions to blend into legs, arms and body. Use remaining residue on mitt for elbows and knees.
Step 3 Wait until touch dry before dressing. Conveniently requires no wash off. For best results, leave foaming water on skin for at least six hours. For the deepest tan, re-apply 30 minutes after initial application. Wash hands thoroughly after use.
Description Ready when you are, our Bondi Sands 1 Hour Express Face Mist will leave your skin with a sunkissed Australian glow in just one hour. With dual action formula to provide a deep, long lasting tan, this lightweight self-tanning mist will leave you hydrated and glowing with every application. Dermatologically tested. Suitable for sensitive skin. Non-comedogenic – won’t clog pores. Fragrance & sulphate free.Ingredients AQUA (WATER), GLYCERIN, DIHYDROXYACETONE, PROPYLENE GLYCOL, PENTYLENE GLYCOL, POLYSORBATE 20, DIMETHYL ISOSORBIDE, SODIUM METABISULFITE, ERYTHRULOSE, CI 14700 (FD&C RED NO. 4), CI 19140 (FD&C YELLOW NO. 5), TOCOPHERYL ACETATE, CI 42090 (FD&C BLUE NO. 1), SODIUM BENZOATE, POTASSIUM SORBATE, CITRIC ACID.Direction Step 1 Ensure face is clean, dry and free from any product.
Step 2 Shake well before use. Spray 4-6 pumps of 1 Hour Express Self Tanning Face Mist onto the Bondi Sands Application Mitt. As the formula has a guide colour, be sure to blend gently into the face and neck in circular motions immediately after application. Wash hands thoroughly after use.
Step 3 Rinse skin after one hour for a long lasting deep tan. For a deeper tan, leave on skin for two-three hours. Do not apply any other skincare products until colour has developed. Re-apply as desired.
Ingredients AQUA (WATER), GLYCERIN, PHENOXYETHANOL, SODIUM LACTATE, LACTIC ACID, XANTHAN GUM, BENZYL ALCOHOL, CARRAGEENAN, GLUCONOLACTONE (PHA), ETHYLHEXYLGLYCERIN, SODIUM BENZOATE, CALCIUM GLUCONATE, ALOE BARBADENSIS LEAF JUICE POWDER, PRUNUS SPECIOSA (OSHIMA CHERRY BLOSSOM) FLOWER EXTRACT.Direction Step 1 Apply 1-2 drops of Bondi Sands Buff'n Polish Gentle Chemical Exfoliant to clean, dry skin.
Step 2 Once absorbed, finish with moisturiser. If used in the morning, follow with SPF protection.
Step 3 For best results, leave on skin overnight.
Description Sand, sea and sun, the enviable Australian image. Experience a sun-kissed Australian tan every time with Bondi Sands Liquid Gold Self Tanning Foam. Enriched with Argan Oil and infused with the scent of coconut, this hydrating self-tanning foam will develop into a golden tan that is touch dry in secondsIngredients AQUA (WATER), DIHYDROXYACETONE, PROPYLENE GLYCOL, ALCOHOL, POLYSORBATE 20, DIMETHYL ISOSORBIDE, OLETH-20, PENTYLENE GLYCOL, ERYTHRULOSE, SODIUM METABISULFITE, PEG-7 GLYCERYL COCOATE, PARFUM (FRAGRANCE), PHENOXYETHANOL, 1,2-HEXANEDIOL, CAPRYLYL GLYCOL, CI 14700 (FD&C RED NO. 4), CI 19140 (FD&C YELLOW NO. 5), HYDROLYZED JOJOBA ESTERS, ARGANIA SPINOSA KERNEL OIL, COCOS NUCIFERA (COCONUT) OIL, TOCOPHERYL ACETATE, CI 42090 (FD&C BLUE NO. 1), COUMARIN.Direction Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump foam applicator firmly and apply Bondi Sands Self Tanning Foam liberally to a tanning mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on tanning mitt for face, elbows and knees.
Step 3 Wait until touch dry before dressing. Conveniently requires no wash off. Leave foam on skin for at least 6 hours.
Description Blending a fragrance free formula with the benefits of Dermachromatic™ Colour Technology, skin-centric active Vitamin C to help brighten, and Chamomile to help soothe, Technocolor Magenta Self Tanning Face Serum is perfect for olive-deep skin tones looking to achieve a rich, deep toned face tan. Featuring high-level tanning active ingredients, warm-toned bronzed colour enhancers and electrolyte hydration, Technocolor Magenta Face counteracts the development of cool tones to provide the most natural result. Additional Blemish Control Complex™ helps prevent breakouts and blemishes from appearing, leaving you with an enhanced, skin-blurring finish after every application.Ingredients INGREDIENTS: AQUA (WATER), DIHYDROXYACETONE, PROPYLENE GLYCOL, CAPRYLIC/CAPRIC TRIGLYCERIDE, HYDROXYETHYL ACRYLATE/SODIUM ACRYLOYLDIMETHYL TAURATE COPOLYMER, SIMMONDSIA CHINENSIS (JOJOBA) SEED OIL, PUNICA GRANATUM PERICARP EXTRACT, CHAMOMILLA RECUTITA (MATRICARIA) FLOWER EXTRACT, SODIUM HYALURONATE, ALOE BARBADENSIS LEAF EXTRACT, COCOS NUCIFERA (COCONUT) WATER, GLYCERIN, ERYTHRULOSE, CETEARYL OLIVATE, SORBITAN OLIVATE, XANTHAN GUM, DISODIUM EDTA, ETHYLHEXYLGLYCERIN, SODIUM METABISULFITE, ASCORBIC ACID, LACTIC ACID, MALTODEXTRIN, SODIUM HYDROXIDE, POTASSIUM SORBATE, SODIUM BENZOATE, CI 42090 (BLUE 1), CI 19140 (YELLOW 5), CI 14700 (RED 4), PHENOXYETHANOL.
STORE BELOW 86°F (30°C).Direction Step 1
Apply Bondi Sands Technocolor Self Tanning Face Serum liberally and evenly to clean, dry skin and wash hands thoroughly after use.
Step 2
Leave on the skin for a minimum of 6 hours.
Step 3
For best results, do not layer any additional products until the development time is complete.
Ingredients AQUA (WATER/EAU), DIHYDROXYACETONE, PROPYLENE GLYCOL, TRIDECETH-9, ALOE BARBADENSIS LEAF JUICE, POLYSORBATE 20, PEG-5 ETHYLHEXANOATE, GLYCERIN, ETHOXYDIGLYCOL, BUTYLENE GLYCOL, PHENOXYETHANOL, PARFUM (FRAGRANCE), PEG-12 DIMETHICONE, CI 14700 (FD&C RED NO. 4), CI 19140 (FD&C YELLOW NO. 5), TOCOPHERYL ACETATE, DISODIUM EDTA, BENZYL ALCOHOL, PANTHENOL, CI 42090 (FD&C BLUE NO. 1).Direction Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Pump foam applicator firmly and apply Bondi Sands Self Tanning Foam liberally to a tanning mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on tanning mitt for face, elbows and knees.
Step 3 Skin may be washed after one hour. For a longer lasting darker tan leave foam on skin for up to 6 hours. Shower with warm water and gently pat skin dry. For the deepest tan re-apply Bondi Sands Self Tanning Foam 30 minutes after initial application.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Description Step into the sun with confidence using Bondi Sands Sport SPF 50+ Sunscreen Spray. Our sweat resistant, Cool Motion® Technology offers high performance protection whilst allowing your skin to sweat, naturally keeping you cool and composed so you can perform at your best.Reef friendly. Fragrance free. Paraben free. Sulphate free.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 6.00% W/W, OCTYL SALICYLATE 3.00% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3.00% W/W, OCTOCRYLENE 3.00% W/W, BEMOTRIZINOL 0.09% W/W. PRESERVATIVES: PHENOXYETHANOL, CHLORPHENESIN. PROPELLANT: DIMETHYL ETHERActive Ingredients: ACTIVE INGREDIENTS: HOMOSALATE 6.00% W/W, OCTYL SALICYLATE 3.00% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3.00% W/W, OCTOCRYLENE 3.00% W/W, BEMOTRIZINOL 0.09% W/W. PRESERVATIVES: PHENOXYETHANOL, CHLORPHENESIN. PROPELLANT: DIMETHYL ETHER Direction Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas 15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more often when sweating and after swimming, exercise or towel drying.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 100MG/G, OCTOCRYLENE 80MG/G, ETHYHEXYL SALICYLATE 50MG/G, BUTYL METHOXYDIBENZOYLMETHANE 40MG/G, ETHYHEXYL TRIAZONE 10MG/G. CONTAINS: PHENOXYETHANOL.Direction Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas
15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more frequently when
sweating, and after swimming, exercise or towel drying.
Description Blending a fragrance free formula with the benefits of Dermachromatic™ Colour Technology, skin-centric active Vitamin C to help brighten, and Chamomile to help soothe, Technocolor Sapphire Self Tanning Face Serum is perfect for fairer skin tones looking to achieve a natural, cool toned face tan. Featuring low-level tanning active ingredients, cool-toned bronzed colour enhancers and electrolyte hydration, Technocolor Sapphire Face counteracts the development of orange tones to provide the most natural result. Additional Blemish Control Complex™ helps prevent breakouts and blemishes from appearing, leaving you with an enhanced, skin-blurring finish after every application.Ingredients INGREDIENTS: AQUA (WATER), PROPYLENE GLYCOL, DIHYDROXYACETONE, CAPRYLIC/CAPRIC TRIGLYCERIDE, HYDROXYETHYL ACRYLATE/SODIUM ACRYLOYLDIMETHYL TAURATE COPOLYMER, SIMMONDSIA CHINENSIS (JOJOBA) SEED OIL, PUNICA GRANATUM PERICARP EXTRACT, CHAMOMILLA RECUTITA (MATRICARIA) FLOWER EXTRACT, ALOE BARBADENSIS LEAF EXTRACT, COCOS NUCIFERA (COCONUT) WATER, GLYCERIN, ERYTHRULOSE, CETEARYL OLIVATE, SORBITAN OLIVATE, XANTHAN GUM, DISODIUM EDTA, ETHYLHEXYLGLYCERIN, SODIUM METABISULFITE, ASCORBIC ACID, LACTIC ACID, MALTODEXTRIN, SODIUM HYDROXIDE, POTASSIUM SORBATE, SODIUM BENZOATE, CI 19140 (YELLOW 5), CI 14700 (RED 4), CI 42090 (BLUE 1), PHENOXYETHANOL.Direction Step 1
Apply Bondi Sands Technocolor Self Tanning Face Serum liberally and evenly to clean, dry skin and wash hands thoroughly after use.
Step 2
Leave on the skin for a minimum of 6 hours.
Step 3
For best results, do not layer any additional products until the development time is complete.
ALWAYS READ THE LABEL. FOLLOW THE DIRECTIONS FOR USE. WHEN USING SUNSCREEN ALWAYS WEAR A HAT, PROTECTIVE CLOTHING AND SUNGLASSES. AVOID PROLONGED HIGH-RISK SUN EXPOSURE. REAPPLY SUNSCREEN FREQUENTLY OR USE IN ACCORDANCE WITH DIRECTIONS.Ingredients ACTIVE INGREDIENTS: HOMOSALATE 10.00% W/W, OCTOCRYLENE 8.00% W/W, OCTYL SALICYLATE 5.00% W/W, BUTYL METHOXYDIBENZOYLMETHANE 3.00% W/W. PRESERVATIVES: PHENOXYETHANOL, BENZYL ALCOHOL.Direction Step 1. Shake well before use.
Step 2. Apply liberally and evenly to all unprotected areas 15 to 20 minutes before exposure to the sun.
Step 3. Re-apply every 2 hours or more often when sweating and after swimming, exercise or towel drying.
Description Experience the next generation in self tan with Bondi Sands Aero, an aerated self tanning foam. With dual tanning actives and our signature coconut scent, this ultra lightweight aerosol foam will leave your skin with a sunkissed, long lasting Australian glow. Bondi Sands innovative dual action tanning formula provides a deep, long lasting natural looking tan that hydrates the skin with every application.Ingredients AQUA (WATER) ALCOHOL, PROPYLENE GLYCOL, DIHYDROXYACETONE, GLYCERIN, BUTANE, DIMETHYL ISOSORBIDE, ISOBUTANE, PROPANE, ETHOXYDIGLYCOL, PEG-60 HYDROGENATED CASTOR OIL, POLYSORBATE 20, PARFUM (FRAGRANCE), ERYTHRULOSE, CI 14700 (FD&C RED NO. 4), HYDROLYZED JOJOBA ESTERS, CI 19140 (FD&C YELLOW NO. 5), CI 42090 (FD&C BLUE NO. 1), BISABOLOL, TOCOPHERYL ACETATE, FARNESOL, COUMARIN. PROPELLANT: HYDROCARBON.Direction Step 1 For an even streak free tan, ensure your skin is clean, exfoliated and free of any moisturisers.
Step 2 Apply Bondi Sands Aero liberally to a Bondi Sands Application Mitt before using a long sweeping motion to legs, arms and body. Use remaining residue on mitt for face, elbows and knees.
Step 3 Leave on skin for at least six hours. Shower with warm water and gently pat skin dry. For a deeper tan re-apply Bondi Sands Aero 30 minutes after initial application.
Ingredients AQUA (WATER), CYCLOPENTASILOXANE, CYCLOHEXASILOXANE, CI 77891 (TITANIUM DIOXIDE), CI 77492 (IRON OXIDES), PEG/PPG-19/19 DIMETHICONE, PROPYLENE GLYCOL, CI 77499 (IRON OXIDES), PHENOXYETHANOL, CI 77491 (IRON OXIDES), DISTEARDIMONIUM HECTORITE, SILICA, POTASSIUM SORBATE, SORBITAN ISOSTEARATE, TOCOPHERYL ACETATE, CUCUMIS SATIVUS (CUCUMBER) FRUIT WATER, TRIETHOXYCAPRYLYLSILANE, PARFUM (FRAGRANCE), ASCORBYL PALMITATE, SODIUM BENZOATE, GLUCONOLACTONE, BENZYL SALICYLATE, HYDROXYCITRONELLAL, ALPHA-ISOMETHYL IONONE.Direction Step 1: Shake well. Apply small amount of Bondi Sands GLO Matte One Day Tan directly onto the skin.
Step 2: Spread evenly with Bondi Sands Body Brush or Application Mitt. Reapply as required.
Step 3: Wash hands after application. Remove from skin using a cloth with warm water and soap.
Ingredients AQUA (WATER), COCO-CAPRYLATE/CAPRATE, DIHYDROXYACETONE, GLYCERYL STEARATE, POLYACRYLAMIDE, PHENOXYETHANOL, BENTONITE, PARFUM (FRAGRANCE), C13-14 ISOPARAFFIN, BENZYL ALCOHOL, DIMETHYL ISOSORBIDE, ERYTHRULOSE, LAURETH-7, BUTYROSPERMUM PARKII (SHEA) BUTTER, POTASSIUM CETYL PHOSPHATE, ALOE BARBADENSIS LEAF JUICE POWDER, TOCOPHERYL ACETATE, PERSEA GRATISSIMA (AVOCADO) FRUIT EXTRACT, CITRIC ACID, SODIUM CITRATE, ISOBUTYL ACETATE, ANISYL ALCOHOL.Direction Step 1 For an even, streak free tan, ensure your skin is clean and dry prior to application.
Step 2 Apply Bondi Sands Skin Firming Gradual Tanning Lotion evenly to skin in a circular motion. Wait until touch dry before dressing.
Step 3 Use daily for firm skin and to build a natural looking tan throughout the year. Wash hands after use.
Ingredients AQUA (WATER), KAOLIN, BENTONITE, CI 77891 (TITANIUM DIOXIDE), GLYCERIN, BENZYL ALCOHOL, TREHALOSE, XANTHAN GUM, SPIRULINA PLATENSIS EXTRACT, DEHYDROACETIC ACID, SODIUM CITRATE, CITRIC ACID, HYDROGENATED STARCH HYDROLYSATE, CAMELLIA SINENSIS LEAF POWDER, PROPANEDIOL, FUCUS VESICULOSUS EXTRACT, ERYTHRITOL, LECITHIN, HIBISCUS SABDARIFFA FRUIT EXTRACT, APHANIZOMENON FLOS-AQUAE EXTRACT, SODIUM BENZOATE, PHENOXYETHANOL, POTASSIUM SORBATE, TOCOPHEROL, HELIANTHUS ANNUUS (SUNFLOWER) SEED OIL.Direction Step 1 Apply an even layer of Bondi Sands Bondi Babe Clay Mask to clean, dry skin and leave on for 10-15 minutes.
Step 2 Gently remove with warm water and a damp cloth. Follow with any Bondi Sands Serums or Oil and chosen Bondi Sands Moisturiser.
Step 3 For best results, apply once or twice a week.
