Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and sideburns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaBoxed Contents: Developer liquid, colour cream, mixing tray, applicator wands, under eye protector pads and storage coverSize: 12 Applications Warnings This product contains ingredients which may cause skin irritation to certain individuals, and when used for eyelash and eyebrow tinting may cause injury to the eye. A preliminary test according to the accompanying directions should be made before every use. First Aid InformationFor advice, contact a Poisons Information Centre phone Australia 131126 or a doctor. If swallowed, do NOT induce vomiting. If in eye, was out immediately with water. Ingredients Cream: Aqua, Cetearyl Alcohol, p-Phenylenediamine, m-Aminophenol, Sodium Cetearyl Sulfate, Sodium Laureth Sulfate, 2,4-Diaminophenoxyethanol Sulfate, 2,6-Diaminopyridine, Resorcinol, Ammonia CI 77499, CI77491. Developer Liquid: 3% Hydrogen PeroxideDirection 1. Remove natural oils and make up with a non-oily cleanser from lashes and brows.
2. Lashes: Take two eye protection papers and apply Petroleum Jelly on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. Brows: Apply Petroleum Jelly with a cotton bud around the brow to protect the skin from coming in contact with the dye.
3. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
LASHES: 4. Apply the dye using the white wand or spoolie in the same manner as applying mascara. 5. Leave the dye to develop for ten minutes. 6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad.
BROWS: 4. Using the white wand or spoolie apply the dye mixture to the brows using an upward motion brushing on the cream in the same direction as the hair growth. 5. Leave on for three to ten minutes to develop, depending on preferred depth of colour. 6. Gently remove the dye with a damp cotton pad.
Description 1000HOUR™ brush-in gel formula uses a gentle plant extract colour gel. Ideal for more sensitive skin or those who cannot use peroxide-based products, making it a perfect alternative to daily lash and brow makeup application, or expensive brow clinic visits. • Dermatologically & Ophthalmologically tested• No smudge, waterproof colour for eyelashes and brows• Results that last up to six-weeks (in line with your natural lash turnover)• Quick and easy to use• 12 applications per pack (12-month supply)• Beautiful, professional results• Natural looking shades to enhance lashes and brows• Assembled in Australia from imported components. Colour Crème and Developer Gel made in EU • Product ingredients include nutsWarnings No Ingredients Colour Cream (tube 1): Aqua, Alcohol denat, (Calendula Officinalis/Safflower Flower/Achillea Millefolium Flower, Leaf and Stem/Vaccinium Myrtillus/Vitex Agnus-Castus Fruit/Rhus Chinensis Gall/Walnut Husk/Camellia Sinensis/Nettle Leaf/(Juniperus Communis Leaf and Stem/Horse Chestnut Nut/Dichroa Febrifuga Root/Grape Seed/Acacia Catechu Wood/Goldenrod/ Hypericum Perforatum Extract) Carbomer, Sodium Hydroxide. Developer Gel (tube 2):Aqua, Silver Nitrate, Ammonium Acryloyldimethyltaurate/VP Copolymer, Ammonia.Direction "1. Make sure lashes and brows are completely clean by removing natural oils as well as make up with a non-oily cleanser.
2. Lashes: Take two eye protection papers and put some Vaseline on one side of the eye protection papers. Press the papers right up under the eye and adhere to the skin as close as possible to the bottom lashes.
3. Brows: Apply Vaseline with a cotton bud on the skin around the brow to protect it from coming in contact with the dye.
4. Squeeze 2cm of the colour cream into the clean mixing cup. Then apply to the lashes using the black applicator wand as if you are applying mascara.
5. Apply to the brows at the same time using an upward motion brushing on the cream in the same direction as the hair growth.
6. Leave on for 2 minutes.
7. THEN REMOVE THE COLOUR CREAM FROM LASHES & BROWS USING A DRY COTTON PAD.
8. Squeeze 2cm of the developer gel into the clean mixing cup. Then apply to the lashes using the pink applicator wand as if you are applying mascara. Apply to the brows at the same time using an upward motion brushing on the developing gel in the same direction as the hair growth.
9. Leave on for 1 minute
10. CLEANING THE EYELASHES AND BROWS: At the end of the application time, remove excess developer gel using a damp cotton pad."
Description RapidLash Eyelash Enhancing Serum is an award-winning formula with a success story of over 3 million units sold worldwide! RapidLash is ophthalmologist-tested and clinically proven to be safe and effective to cosmetically boost the look of your lashes!The key to unlocking your lashes’ potential can be found in the unique RapidLash® formula. Our innovative HEXATEIN® 1 COMPLEX, consisting of six highly effective ingredients, is specifically designed to condition, moisturize and fortify to enhance overall appearance of more beautiful lashes.Polypeptides, comprised of beneficial amino acids, help protect against breakageBiotin (Pro-vitamin B7 / Vitamin H), an essential factor in maintaining healthier-looking, youthful lashesPanthenol (Vitamin B5) helps coat the lashes and brows and seal in moisture and nourishment for improved overall appearanceAmino Acids help boost the protein structure, resulting in healthier-looking appearance of lashesSoybean Oil, rich in vitamins, helps impart sheen and luster to lashes and brows making them appear lush and beautifulPumpkin Seed Extract, high in vitamins and minerals, helps balance and enhance the appearance of lashesWarnings "For external use only
Avoid direct contact with the eye.
If irritation occurs, rinse with cool water and discontinue use.
If irritation persists seek medical advice" Ingredients Aqua (Water), Glycerin (and) Myristoyl Pentapeptide-17, Rhizobian Gum, Sodium Hyaluronate, Butylene Glycol, Hydroxyethylcellulose, Biotin, Panthenol, Pantethine, Hydrolyzed Glycosaminoglycans, Allantoin, Cucurbita Pepo (Pumpkin) Seed Extract, Sea Water, Octapeptide-2, Copper Tripeptide-1, Polypeptide-23,Glycine Soja (Soybean) Oil, Phosphatidylcholine, Phenoxyethanol, Chlorphenesin, Sorbic AcidDirection Apply Rapid Apply RapidLash to the base of the upper eyelashes using the applicator brush. The eye should be completely clean of any make-up or eye creams. Start from the inner corner of the eye outwards, directly on the base of your eyelashes. RapidLash is to be used once daily in the evening before bedtime.
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaWarnings "This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use.
KEEP OUT OF REACH FROM CHILDREN." Ingredients "Cream: Aqua, Cetearyl Alcohol, Toulene-2,5-Diamine, Sodium Laureth Sulfate, m-Aminophenol, Aminomethyl Propanol, Sodium Cetearyl Sulfate, 2,4-Diaminophenoxyethanol Sulfate, 2-Methylresorcinol, CI 77491, CI 77492, CI 77499.
Developer Liquid: 3% Hydrogen Peroxide"Direction 1. Remove natural oils and make up
with a non-oily cleanser from lashes
and brows.
2. Lashes: Take two eye protection
papers and apply Vaseline on one
side of the paper. Place and press
the papers underneath the eyes
and adhere to the skin as close as
possible to the bottom lashes. (See
diagram below).
3. Brows: Apply Vaseline with a cotton
bud around the brow to protect the
skin from coming in contact with
the dye.
4. Squeeze a 2.5cm strip of the colour
cream into the mixing cup. Add ten
drops of the developer liquid and
mix together using the white wand
provided.
5. Apply the dye using the white wand
or spoolie in the same manner as
applying mascara. Leave the dye to
develop for ten minutes.
6. Remove the remaining dye by closing
eyes and wiping gently with a damp
cotton pad.
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaWarnings "This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use.
KEEP OUT OF REACH FROM CHILDREN." Ingredients Cream: Aqua, Cetearyl Alcohol, 2,4-Diaminophenoxyethanol Sulfate, Sodium Cetearyl Sulfate, p-Phenylenediamine, , Sodium Laureth Sulfate, CI77077. Developer Liquid: 3% Hydrogen PeroxideDirection 1. Remove natural oils and make up
with a non-oily cleanser from lashes
and brows.
2. Lashes: Take two eye protection
papers and apply Vaseline on one
side of the paper. Place and press
the papers underneath the eyes
and adhere to the skin as close as
possible to the bottom lashes. (See
diagram below).
3. Brows: Apply Vaseline with a cotton
bud around the brow to protect the
skin from coming in contact with
the dye.
4. Squeeze a 2.5cm strip of the colour
cream into the mixing cup. Add ten
drops of the developer liquid and
mix together using the white wand
provided.
5. Apply the dye using the white wand
or spoolie in the same manner as
applying mascara. Leave the dye to
develop for ten minutes.
6. Remove the remaining dye by closing
eyes and wiping gently with a damp
cotton pad.
Description Fabulous no smudge colour for lashes and brows that won’t wash off. Instead of applying mascara daily, use 1000HOUR™ Lash & Brow Dye once every 4-6 weeks! No smudge hair colour for eyelashes, eyebrows and side burns.• No Smudge permanent colour for eyelashes and brows• Beautiful, professional results in just 3 easy steps• 12 applications per pack• Quick and easy to use• Safe and effective• Economical - you can treat yourself to a lash & brow colour at home for a fraction of the cost of a beauty salon eyelash & brow tint• Waterproof, does not smudge or run• Assembled in Australia from local and imported components. Colour Cream made in EU. Developer Liquid made in AustraliaBoxed Contents: Developer liquid, colour cream, mixing tray, applicator wands, under eye protector pads and storage coverSize: 12 Applications Warnings This product contains ingredients which may cause skin irritation to certain indiduals, and when used for eyelash & eyebrow tinting may cause injury to the eye. A preliminary patch test according to the accompanying directions should be made before every use. First Aid InformationFor advice, contact a Poisons Information Centre phone Australia 131126 or a doctor. If swallowed, do NOT induce vomiting. If in eye, was out immediately with water. Ingredients Cream: Aqua, Cetearyl Alcohol, p-Phenylenediamine, m-Aminophenol, Resorcinol, Sodium Laureth Sulfate, p-Aminophenol, Sodium Cetearyl Sulfate, Ammonia, CI 77499, CI 77491, CI 77492. Developer Liquid: 3% Hydrogen Peroxide.Direction 1. Remove natural oils and make up with a non-oily cleanser from lashes and brows.
2. Lashes: Take two eye protection papers and apply Petroleum Jelly on one side of the paper. Place and press the papers underneath the eyes and adhere to the skin as close as possible to the bottom lashes. Brows: Apply Petroleum Jelly with a cotton bud around the brow to protect the skin from coming in contact with the dye.
3. Squeeze a 2.5cm strip of the colour cream into the mixing cup. Add ten drops of the developer liquid and mix together using the white wand provided.
LASHES: 4. Apply the dye using the white wand or spoolie in the same manner as applying mascara. 5. Leave the dye to develop for ten minutes. 6. Remove the remaining dye by closing eyes and wiping gently with a damp cotton pad.
BROWS: 4. Using the white wand or spoolie apply the dye mixture to the brows using an upward motion brushing on the cream in the same direction as the hair growth. 5. Leave on for three to ten minutes to develop, depending on preferred depth of colour. 6. Gently remove the dye with a damp cotton pad.
Description 2 wispy lashes with a discreet band to heighten drama with a natural glamorous finish.Includes Hypoallergenic eyelash adhesive.Warnings DO NOT apply adhesive directly to eyelids. Ingredients Water, Styrene/Acrylates/Ammonium/Methacrylate Copolymer, Ethylparaben, MethylparabenDirection 1. For best results curl your lashes and apply one coat of mascara before applying lashes.
2. Measure the lashes against your eye and trim band to correct length (about 8% of your eye width).
3. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
4. Apply a thin coat of adhesive to lash band. Wait 2-3 seconds until glue becomes sticky. This will ensure the lashes stick properly.
5. Gently press the applicator above the natural lashes along the natural lash line.
6. Release lash applicator once entire lash is secure.Lash application should be the last step in your eye makeup routine.
Warnings DO NOT apply adhesive directly to eyelids. Ingredients Acrylates/Ethylhexyl Acrylate Copolymer, PropyleneGlycol, Phenoxyethanol, Ethylhexylglycerin, MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
- Measure the lashes against your eye and trim band to correct length (about 80% of your eye width).
-Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
-Apply a thin coat of adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
-Gently press the applicator above the natural lashes along the natural lash line.
-Release lash applicator once entire lash is secure.Lash application should be the last step in your eye make-up routine.
Description When only the gold standard will do! Our Remy Collection features 100% premium-grade human hair, known in the industry as the highest quality available. This lash style is dark, voluminous and oh-so-shiny, which in turn looks more natural than other lash fibers. Keeping your lash game strong has never been easier.Product Features:Features 100% premium-grade human hairLooks more natural than other lash fibersDark, voluminous and oh-so-shinyIngredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Ingredients Methoxyisopropyl Acetate, Nitrocellulose, Alcohol Denat.Direction Before applying individual lashes, thoroughly clean your natural eyelashes and eyelid so they are makeup and oil free.
Place 2-3 drops of LashTite Adhesive onto a small piece of foil. Dip the knotted end of the lash in the adhesive, then place the knotted end onto your own lashes close to the eyelid where required and press gently for a few seconds. Continue the same method with each individual lash.
Description 1000HOUR™ brush-in gel formula uses a gentle plant extract colour gel. Ideal for more sensitive skin or those who cannot use peroxide-based products, making it a perfect alternative to daily lash and brow makeup application, or expensive brow clinic visits. • Dermatologically & Ophthalmologically tested• No smudge, waterproof colour for eyelashes and brows• Results that last up to six-weeks (in line with your natural lash turnover)• Quick and easy to use• 12 applications per pack (12-month supply)• Beautiful, professional results• Natural looking shades to enhance lashes and brows• Assembled in Australia from imported components. Colour Crème and Developer Gel made in EU • Product ingredients include nutsWarnings No Ingredients Colour Cream (tube 1): Aqua, Alcohol denat, (Calendula Officinalis/Safflower Flower/Achillea Millefolium Flower, Leaf and Stem/Vaccinium Myrtillus/Vitex Agnus-Castus Fruit/Rhus Chinensis Gall/Walnut Husk/Camellia Sinensis/Nettle Leaf/(Juniperus Communis Leaf and Stem/Horse Chestnut Nut/Dichroa Febrifuga Root/Grape Seed/Acacia Catechu Wood/Goldenrod/ Hypericum Perforatum Extract) Carbomer, Sodium Hydroxide. Developer Gel (tube 2):Aqua, Silver Nitrate, Ammonium Acryloyldimethyltaurate/VP Copolymer, Ammonia.Direction 1. Make sure lashes and brows are completely clean by removing natural oils as well as make up with a non-oily cleanser.
2. Lashes: Take two eye protection papers and put some Vaseline on one side of the eye protection papers. Press the papers right up under the eye and adhere to the skin as close as possible to the bottom lashes.
3. Brows: Apply Vaseline with a cotton bud on the skin around the brow to protect it from coming in contact with the dye.
4. Squeeze 2cm of the colour cream into the clean mixing cup. Then apply to the lashes using the black applicator wand as if you are applying mascara.
5. Apply to the brows at the same time using an upward motion brushing on the cream in the same direction as the hair growth.
6. Leave on for 2 minutes.
7. THEN REMOVE THE COLOUR CREAM FROM LASHES & BROWS USING A DRY COTTON PAD.
8. Squeeze 2cm of the developer gel into the clean mixing cup. Then apply to the lashes using the pink applicator wand as if you are applying mascara. Apply to the brows at the same time using an upward motion brushing on the developing gel in the same direction as the hair growth.
9. Leave on for 1 minute
10. CLEANING THE EYELASHES AND BROWS: At the end of the application time, remove excess developer gel using a damp cotton pad.
Warnings DO NOT apply adhesive directly to eyelids. Ingredients Acrylates/Ethylhexyl Acrylate Copolymer, PropyleneGlycol, Phenoxyethanol, Ethylhexylglycerin, MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
- Measure the lashes against your eye and trim band to correct length (about 80% of your eye width).
-Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
-Apply a thin coat of adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
-Gently press the applicator above the natural lashes along the natural lash line.
-Release lash applicator once entire lash is secure.Lash application should be the last step in your eye make-up routine.
Description Glam By Manicare® Flexi Lashes are extremely comfortable with a stretchy and bendy invisible band that perfectly fits your eye line, follows your eyes’ movement, and stays on well from end to end.From a natural finish to a dramatic lash effect, Glam By Manicare® has lashes to suit every occasion.- Invisible band- Lightweight- Reusable up to 5 times- Hypoallergenic and latex-free adhesive included- Cruelty-FreeSize: 1 Pair Warnings Warning: Keep out of reach of children. Do not apply adhesive directly to eyelids. For external use only. Avoid direct contact with eyes. If irritation occurs, rinse immediately with water. Store below 30°C. Ingredients Glue: Acrylates/Ethylhexyl Acrylate Copolymer, Propylene Glycol, Phenoxyethanol, Ethylhexylglycerin. MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
1. Measure the lashes against your eye and trim band to correct length.
2. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
3. Apply a thin coat of included adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
4. Gently press the applicator above the natural lashes along the natural lash line. Release lash applicator once entire lash is secure.
Ingredients Water (Aqua, Eau), Rubber Latex, Cellulose Gum, Sodium Dodecylbenzenesulfonate, Ammonium Hydroxide, Fragrance (Parfum), Coumarin, Geraniol, Limonene, Linalool, Formaldehyde.Direction 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set.3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Glam By Manicare® uses a tech smart clear eyeliner with lash adhesive for seamless and express application. Simply apply the clear eyeliner along top of lash line and press strip lashes on top for instant application.Create a flawless lash look with the long lasting and waterproof clear adhesive eyeliner paired with lightweight clear banded lashes for invisible application designed to last all day.- Quick & easy- Up to 30 uses- Precise felt tip- Cruelty free- Hypo-allergenic- Latex freeWarnings Shake well before use. Patch test prior to use to determine any sensitivity and do not use if any irritation occurs. Avoid direct contact with eyes and contact lenses. In case of eye contact, rinse immediately with water. Eyeliner can be removed using make up remover. Latex free. Not suitable for magnetic lashes. Ingredients Ingredients: Water (Aqua), Styrene/Acrylates Copolymer, Propylene Glycol, Polyvinyl Alcohol, Polysorbate 80, Phenoxyethanol, Caprylyl Glycol, Ethylhexylglycerin. GMCE01Direction 1. Try on lashes to check fit & trim if needed.
2. Apply eyeliner on the top of eye lid along natural lash line.
3. Immediately apply lash on top of eyeliner & press to adhere.
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Glam By Manicare® Flexi Lashes are extremely comfortable with a stretchy and bendy invisible band that perfectly fits your eye line, follows your eyes’ movement, and stays on well from end to end.From a natural finish to a dramatic lash effect, Glam By Manicare® has lashes to suit every occasion.- Invisible band- Lightweight- Reusable up to 5 times- Hypoallergenic and latex-free adhesive included- Cruelty-FreeSize: 1 Pair Warnings Warning: Keep out of reach of children. Do not apply adhesive directly to eyelids. For external use only. Avoid direct contact with eyes. If irritation occurs, rinse immediately with water. Store below 30°C. Ingredients Glue: Acrylates/Ethylhexyl Acrylate Copolymer, Propylene Glycol, Phenoxyethanol, Ethylhexylglycerin. MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
1. Measure the lashes against your eye and trim band to correct length.
2. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
3. Apply a thin coat of included adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
4. Gently press the applicator above the natural lashes along the natural lash line. Release lash applicator once entire lash is secure.
Description Glam By Manicare® pre-glued lashes are ready to wear without the need to apply lash adhesive. Featuring a cushioned and lightweight band with glue for comfortable wear and effortless application in seconds. Simply press on lashes and go! From a natural finish to a dramatic lash effect, Glam By Manicare® has lashes to suit every occasion.Mink Effect Lashes Lightweight Cruelty FreeHypo-allergenic Latex FreeSize: 1 Pack Warnings Recommended for single use. Store in a cool, dry place. To remove, hold lash at the inner edge and pull away gently to peel off the lash line. Latex Free. Ingredients Styrene/Isoprene Copolymer, Petroleum Resins, Glyceryl Rosinate, Paraffinum Liquidum, Rosin, Polybutene, Hydrogenated Poly(C6-C20)olefin, Carbon Black, Pentaerythrityl Tetra-Di-T-Butyl Hydroxyhydrocinnimate.Direction 1. Gently peel the lash off tray from one side.
2. Try on lashes to check fit & trim if needed.
3. Apply along lash line & press in place lightly.HOT TIP: Lash application should be the last step in your make up routine.
Description Glam By Manicare® uses a tech smart all in one eyeliner with lash adhesive for express application. Simply apply the Glam Xpress® eyeliner along top of lash line and press strip lashes on top for instant application. Create your look, from soft to dramatic, with the smudge proof, flake free and waterproof multi purpose eyeliner designed for smooth application and a semi matte finish. Up to 30 Uses. Flexible Felt Tip.--Quick & easy--Reusable--Cruelty free--HypoallergenicSize: 1 Pack Warnings Shake well before use. Patch test prior to use to determine any sensitivity and do not use if any irritation occurs. Avoid direct contact with eyes and contact lenses. In case of eye contact, rinse immediately with water. Eyeliner can be removed using makeup remover. For use with strip lashes. Not suitable for use with any magnetic lash type. Ingredients CI 77499, Water (Aqua), Styrene/Acrylates Copolymer, Propanediol, Polyvinyl Alcohol, Polysorbate 80, Caprylyl Glycol, Phenoxyethanol, Ethylhexylglycerin. GMAE02Direction 1. Try on lashes to check fit & trim if needed.
2. Apply eyeliner on the top of eye lid along natural lash line.
3. Immediately apply lash on top of eyeliner & press to adhere.Extend eyeliner and kick out at the corner to create a winged effect.
Warnings DO NOT apply adhesive directly to eyelids. Ingredients Acrylates/Ethylhexyl Acrylate Copolymer, PropyleneGlycol, Phenoxyethanol, Ethylhexylglycerin, MJ-AWFDirection For best results curl your lashes and apply one coat of mascara before applying lashes.
- Measure the lashes against your eye and trim band to correct length (about 80% of your eye width).
-Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
-Apply a thin coat of adhesive to lash band. Wait 20-30 seconds until glue becomes sticky. This will ensure the lashes stick properly.
-Gently press the applicator above the natural lashes along the natural lash line.
-Release lash applicator once entire lash is secure.Lash application should be the last step in your eye make-up routine.
Description 2 full-bodied lashes with wispy edges for a dramatic lash effect.Includes Hypoallergenic eyelash adhesive.Warnings DO NOT apply adhesive directly to eyelids. Ingredients Water, Styrene/Acrylates/Ammonium/Methacrylate Copolymer, Ethylparaben, MethylparabenDirection 1. For best results curl your lashes and apply one coat of mascara before applying lashes.
2. Measure the lashes against your eye and trim band to correct length (about 8% of your eye width).
3. Using the lash applicator, gently grasp the lash at the base, leaving the lash band exposed.
4. Apply a thin coat of adhesive to lash band. Wait 2-3 seconds until glue becomes sticky. This will ensure the lashes stick properly.
5. Gently press the applicator above the natural lashes along the natural lash line.
6. Release lash applicator once entire lash is secure.Lash application should be the last step in your eye makeup routine.
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Glam By Manicare® HYDRO LASH uses a revolutionary water activated band for effortless application without the need to apply lash adhesive. Simply dip lash band in water to activate the adhesive and apply onto lash line. Designed for long lasting wear and a lightweight finish. From a natural finish to a dramatic lash effect, Glam By Manicare® has lashes to suit every occasion.- Mink Effect Lashes- Lightweight- Reusable up to 3 times.- Cruelty Free- Latex FreeSize: 1 Pack Ingredients Ingredients: Propylene Glycol, Phenoxyethanol, Caprylyl Glycol, Ethylhexylglycerin. GLAM105Direction 1. Try on lashes to check fit & trim if needed.
2. Dip lash band in water for 5 seconds and then remove from water. Wait 60 seconds for the water to absorb into the lash band.
3. Apply on eyelid. Allow to dry.
To remove, wet a cotton pad with water, apply onto eye to loosen lash strip and then gently peel away. Allow lashes to dry and store in tray provided.HOT TIP: Lash application should be the last step in your make up routine.Storage Instructions Store in a cool, dry place.
