Ingredients Methoxyisopropyl Acetate, Nitrocellulose, Alcohol Denat.Direction Before applying individual lashes, thoroughly clean your natural eyelashes and eyelid so they are makeup and oil free.
Place 2-3 drops of LashTite Adhesive onto a small piece of foil. Dip the knotted end of the lash in the adhesive, then place the knotted end onto your own lashes close to the eyelid where required and press gently for a few seconds. Continue the same method with each individual lash.
Ingredients Water (Aqua, Eau), Rubber Latex, Cellulose Gum, Sodium Dodecylbenzenesulfonate, Ammonium Hydroxide, Fragrance (Parfum), Coumarin, Geraniol, Limonene, Linalool, Formaldehyde.Direction 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set.3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients n/aDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil.
3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye.
CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Ingredients n/aDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil.
3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye.
CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Description The Ardell magnetic gel eyeliner acts like an adhesive and holds your magnetic lashes in place!Product Features:Acts like an adhesive and holds your magnetic lashes in placeNo Adhesive NeededLong lastingWaterproofParaben & latex freeIngredients Stem oil, Glyceryl oleate, Alcohol, Sodium chloride, Sodium benzoate, Potassium sorbate, Citric acid,Direction APPLICATION:
Apply two coats of Magnetic Gel Liner along the upper lash line.
Place Magnetic Lashes on Magnetic Gel Liner while liner is still semi-wet. Gently press down to secure.
REMOVAL:
Gently peel off Magnetic Lashes and remove Magnetic Gel LIner residue from the band/magnets, taking care not to detach magnets from band. Store in tray for reuse.
To remove Magnetic Gel Liner, gently wipe an oil-based makeup remover over closed eyelids until clean.
QUICK TIPS:
Apply on clean & dry lids. For best results, use primer prior to application. If you need to reposition Magnetic Lashes once the Magnetic Gel Liner has dried, slowly peel off lashes and gently remove any Magnetic Gel Liner from band/magnets, taking care not to detach magnets from the lash band.
Reapply fresh coats of Magnetic Gel Liner before reattaching Magnetic Lashes.
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. Wait 30 seconds to set. 3) Apply Lashes: Secure lash band by pressing onto lash line
Ingredients n/aDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil.
3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye.
CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Description When only the gold standard will do! Our Remy Collection features 100% premium-grade human hair, known in the industry as the highest quality available. This lash style is dark, voluminous and oh-so-shiny, which in turn looks more natural than other lash fibers. Keeping your lash game strong has never been easier.Product Features:Features 100% premium-grade human hairLooks more natural than other lash fibersDark, voluminous and oh-so-shinyIngredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients Water (Aqua, Eau), Rubber Latex, Cellulose Gum, Sodium Dodecylbenzenesulfonate, Ammonium Hydroxide, Fragrance (Parfum), Coumarin, Geraniol, Limonene, Linalool, Formaldehyde.Direction Squeeze a thin line of Adhesive along the lash band . Spread evenly and wait about 30 seconds for the adhesive to set.
Place lash as close to your natural lash line as possible. Use your fingertip to gently press along the band to secure in place.
Ingredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients n/aDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Ingredients n/aDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients n/aDirection Use the curved end of the applicator to securely grip and hold the lash.
Then place the lash along the natural lash line.
Use the angled rubber tip to gently press down and secure the false lash along the lash line and corners of the eyelids.
Ingredients Acrylates / Ethylhexyl Acrylate Copolymer.Direction 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Lightweight Lash Experience: light and comfy, you’ll forget your wearing falsies! Be confident and beautiful, don't experience that awkward heaviness your old lashes give you. The Ardell Duralash Flare - Medium takes your lashes to a whole new level of style and beauty with a natural feel. They’re certified cruelty-free and vegan-friendly too!Ingredients n/aDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil. 3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye. CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
