Ingredients not applicableDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil.
3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye.
CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Ingredients not applicableDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Description The Ardell magnetic gel eyeliner acts like an adhesive and holds your magnetic lashes in place!Product Features:Acts like an adhesive and holds your magnetic lashes in placeNo Adhesive NeededLong lastingWaterproofParaben & latex freeIngredients Stem oil, Glyceryl oleate, Alcohol, Sodium chloride, Sodium benzoate, Potassium sorbate, Citric acid,Direction APPLICATION:
Apply two coats of Magnetic Gel Liner along the upper lash line.
Place Magnetic Lashes on Magnetic Gel Liner while liner is still semi-wet. Gently press down to secure.
REMOVAL:
Gently peel off Magnetic Lashes and remove Magnetic Gel LIner residue from the band/magnets, taking care not to detach magnets from band. Store in tray for reuse.
To remove Magnetic Gel Liner, gently wipe an oil-based makeup remover over closed eyelids until clean.
QUICK TIPS:
Apply on clean & dry lids. For best results, use primer prior to application. If you need to reposition Magnetic Lashes once the Magnetic Gel Liner has dried, slowly peel off lashes and gently remove any Magnetic Gel Liner from band/magnets, taking care not to detach magnets from the lash band.
Reapply fresh coats of Magnetic Gel Liner before reattaching Magnetic Lashes.
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. Wait 30 seconds to set. 3) Apply Lashes: Secure lash band by pressing onto lash line
Ingredients not applicableDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil.
3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye.
CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Description Ardell provides another easy to use lash innovation! New and existing lash users will not have to fuss over and tackle applying adhesive to false lashes, we’ve done that work for you. As simple as dipping in water activates Aqua Lashes and all you have to do is apply it to your lash line. Beautiful lashes in 2 easy steps.- The lashes are lined with adhesive that is activated by water- Application in 2 easy steps – 1. dip lash band in water 2. apply to lash line- Beautiful, lush styles in natural to dramatic looks- Lashes have tapered tips and a black band mimicking the look of eyelinerIngredients Water (Aqua, Eau), Acacia Senegal Gum, Casein, PVP.Direction 1. Check fit: Align band with natural lash line to check for fit. Remove lash tabs by trimming each end. Trim any excess lash for fit if necessary.
2. Activate adhesive: Immerse lash band in warm water for 10-15 seconds. Ensure lash band is fully saturated before applying to lash line.
3. Apply lashes: Secure lash band by pressing onto lash line.
Removal: To remove, saturate a cotton swab with water and apply along the lash band. Gently peel away lash strip, starting from the outer corner and slowly moving toward the inner corner.
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients Acrylates, ethythexyl Acrylate copolymerDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients not applicableDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Due to high demand , this products ran out of stock , please re-check in 24H
Description Longer and Thicker Lashes: Bring on the lashes! This conditioner serum helps repair weak lashes and prevents hair from breaking and falling out, leaving you with longer and thicker eyelashes in as little as two weeks. It also helps mascara go on smoother and lasts longer when applied over this product. Say hello to bigger fuller lashes in just a few weeks time!Ingredients Water (Aqua, Eau), Paeonia Suffruticosa Root Extract, Panthenol, PTFE, Hydrolyzed Soy Protein, Hydrolyzed Wheat Protein, VP/DMAPA Acrylates Copolymer, Polyquaternium 37, Propylene Glycol Dicaprylate/Dicaprate, PPG 1 Trideceth 6, Ricinus Communis (Castor Seed) Oil (Castor), Iodopropynyl Butylcarbamate, DMDM HydantoinDirection After cleansing, brush onto lash and/or brows. Leave on all night.
Ingredients Water (Aqua, Eau), Rubber Latex, Cellulose Gum, Sodium Dodecylbenzenesulfonate, Ammonium Hydroxide, Fragrance (Parfum), Coumarin, Geraniol, Limonene, Linalool, Formaldehyde.Direction Squeeze a thin line of Adhesive along the lash band . Spread evenly and wait about 30 seconds for the adhesive to set.
Place lash as close to your natural lash line as possible. Use your fingertip to gently press along the band to secure in place.
Ingredients not applicableDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients not applicableDirection Use with Ardell Magnetic Gel Liner.
Application Instructions: Apply two coats of Magnetic Gel Liner along the upper lash line. Place Magnetic Lashes on Magnetic Gel Liner while liner is still semi-wet and gently press down to secure.
Ingredients not applicableDirection 1. Align the lash band with your natural lash line to check the fit. Trim the outer end if required.
2. Apply a thin line of lash adhesive to the lash band, wait until the adhesive becomes tacky.
3. Place the lash band as close to your natural lash line as possible and gently press down to secure.
To remove, simply peel off the lash from the outer edge and carefully remove adhesive from the band to reuse
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients DUO ADHESIVE Ingredients: Acrylates/Ethylhexyl Acrylate Copolymer, Alcohol Denat.Direction Easy 3 Step Application:
Align band with natural lash line to check fit. Trim excess if necessary.
Apply a thin line of adhesive along band. Wait 30 seconds to set.
Secure lash band by pressing onto lash line.
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Ingredients not applicableDirection Use the curved end of the applicator to securely grip and hold the lash.
Then place the lash along the natural lash line.
Use the angled rubber tip to gently press down and secure the false lash along the lash line and corners of the eyelids.
Ingredients not applicableDirection 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. Wait 30 seconds to set. 3) Apply Lashes: Secure lash band by pressing onto lash line
Ingredients Acrylates / Ethylhexyl Acrylate Copolymer.Direction 1) Check Fit: Align lash band with your natural lash line to check fit. If it extends beyond the lash line, trim excess with small scissors. 2) Apply Adhesive: Squeeze a thin line of LashGrip Adhesive along the lash band. A toothpick can be used to spread it evenly. Wait about 30 seconds for adhesive to set. 3) Apply Lash: Place the lash as close to your natural lash line as possible. Secure lash band by pressing onto the lash line. For best results, use Ardell Lash Applicator to hold and apply lashes. To remove, gently peel off lash strip at outer corner. Remove used adhesive from band and place lashes back on tray for reuse.
Description Lightweight Lash Experience: light and comfy, you’ll forget your wearing falsies! Be confident and beautiful, don't experience that awkward heaviness your old lashes give you. The Ardell Duralash Flare - Medium takes your lashes to a whole new level of style and beauty with a natural feel. They’re certified cruelty-free and vegan-friendly too!Ingredients not applicableDirection Before applying duralashes, thoroughly clean your natural eyelashes and eyelids so they are makeup and oil free.
1) Gently Remove lash from tray using tweezers. 2) Pour 2-3 drops of LashTite adhesive onto a small piece of foil. 3) Dip knotted end of DuraLash into LashTite Adhesive. Do not fully coat the lash with adhesive. More adhesive does not mean better adhesion. Starting at the outer corner of your eye, place a DuraLash on top of your natural lash with knotted end as close to your eyelid as possible without touching it. Gradually apply DuraLashes, working toward the inner corner of your eye. CARE & CLEANING: Avoid rubbing your eyes with harsh towel. Allow lashes to air dry. Avoid using oil based makeup remover. REMOVAL: Your lashes can be easily removed with specially formulated LashFree Adhesive Remover. Do not try pull them off after adhesive has set. Never pull or tug at lashes as this may cause loss of lashes.
Due to high demand , this products ran out of stock , please re-check in 24H
Ingredients C13-16 Isoparaffin, C10-13 Isoparaffin, C9-11 Isoparaffin, Beeswax (Cera Alba), Polysilicone-11, Cyclopentasiloxane, Polyethylene, PEG-10 Dimethicone, Polymethylsilsesquioxane, Sorbitan Stearate, Phenoxyethanol, Iron Oxide (CI77491, CI77492, CI77499), Titanium Dioxide (CI77891)Direction Brush brow hairs upward using the spoolie end of the brush. Using the angled tip brush, outline the bottom and top of your brow with a small amount of product. Lightly fill in brow. Stay within the outline and extend where needed. Using the spoolie, gently blend and pull colour through to fill in any gaps.
